I purchased 2 separate x-gunner lightguns one came with a infored led light sensor, when activated they show 3 red lights. The other x-gunner came with ir sensor that doesn't show any red lights when activated. My question is why does each gun work with it's own different light sensors?
Some sellers require GUN4IR compatible positioning lights, so they customize 940nm cameras and positioning lights. The manufacturer defaults to producing 850nm cameras and positioning lights. If you purchase from two vendors, there may be two types of positioning lights available. But you can also stick both types of positioning lights on the screen at the same time, so that both light guns can be used.
Can you make a tutorial on calibration an button mapping for each emulators like all the Playstation games, exbox games, etc. Also can u make video of other venders the sell retro games like kriscoolmod or arcade1 so u can show to audience that your gun is compatible to there games?
I never used gun4ir before an also this would be great exposure for your product. It seem like an a almost perfect product if shown some guidance it just make it hard for me justify buying this gun now cause of confusion to configure this product if u shown on a video on this it would honestly help your future buyers and answer common questions you get in the future.
You can search for related video tutorials on other channels of TH-cam. Of course, when I have time, I can record tutorial videos specifically for each emulator
Like GUN4IR, it can be used directly in the Launch Box. Each gun has a receiver, which can be used directly by plugging into the computer without installing a driver. It does not support Gun4IR Gui. X-Gunner Gui and the official website are under construction. You can upgrade and change the buttons yourself later. Now you can search in AliExpress: XGUNNER
So I bought the lightguns, but my lightgun build doesn't work with it. Any tutorials how to configure it? How do you calibrate the lightguns, mines off a bit.
@@KaliMero138 XGunner and gun4ir are different. The positioning lights of XGunner are attached to the four corners of the screen because XGunner uses an 850nm infrared light, which positions both XGunner and gun4ir on the screen. Can be used simultaneously with gun4ir,
@@KaliMero138 This is the user manual, GUI for upgrading firmware and customizing buttons，mega.nz/file/RTIEhLhJ#gjaVnPkA85hSIeBEKBFDdkXXAGqZ3s23Z0z6qIYCbCo
Yes, RetroBat is just a front-end, it just brings together all kinds of emulator games, these emulators support light guns, XGUNNER supports Dolphin, TeknoParrot, RPCS3, duckstation, pcsx2......
@@李髙澕李how can you play with the tekoparrot games mines can’t play with them, and one of my guns only moves the cursor with the joystick on the pistol after calibration
@@TheAccountant1000 In the GAME SETTINGS setting of Tekoparot, select Rawinput for the General Input API, and select HONGWEIHUA XGUNNER-P1 or P2 for the Light Gun in the Controllable SETUP setting
@@TheAccountant1000 This is the user manual, GUI for upgrading firmware and customizing buttons，mega.nz/file/RTIEhLhJ#gjaVnPkA85hSIeBEKBFDdkXXAGqZ3s23Z0z6qIYCbCo
For those who need more support, you can leave your email or join XGUNNER's Discord, where you can find the latest firmware and user manual: discord.gg/zQEfwjSQ
I would apreciate a lot if someone can share a tutorial how to calibrate and configure, I use retrobat.
This is the user manual, GUI for upgrading firmware and customizing buttons，mega.nz/file/RTIEhLhJ#gjaVnPkA85hSIeBEKBFDdkXXAGqZ3s23Z0z6qIYCbCo
I purchased 2 separate x-gunner lightguns one came with a infored led light sensor, when activated they show 3 red lights. The other x-gunner came with ir sensor that doesn't show any red lights when activated. My question is why does each gun work with it's own different light sensors?
Some sellers require GUN4IR compatible positioning lights, so they customize 940nm cameras and positioning lights. The manufacturer defaults to producing 850nm cameras and positioning lights. If you purchase from two vendors, there may be two types of positioning lights available. But you can also stick both types of positioning lights on the screen at the same time, so that both light guns can be used.
Can you make a tutorial on calibration an button mapping for each emulators like all the Playstation games, exbox games, etc. Also can u make video of other venders the sell retro games like kriscoolmod or arcade1 so u can show to audience that your gun is compatible to there games?
All games supported by GUN4IR and XGUNNER have the same settings
@@李髙澕李 then can u just make a video on this one time please then
I never used gun4ir before an also this would be great exposure for your product. It seem like an a almost perfect product if shown some guidance it just make it hard for me justify buying this gun now cause of confusion to configure this product if u shown on a video on this it would honestly help your future buyers and answer common questions you get in the future.
You can search for related video tutorials on other channels of TH-cam. Of course, when I have time, I can record tutorial videos specifically for each emulator
@@Francois3k I will soon create a detailed tutorial on how to use it
How do you calibrate the guns? Are there any tutorials on how to make them work with Launch Box games?
Like GUN4IR, it can be used directly in the Launch Box. Each gun has a receiver, which can be used directly by plugging into the computer without installing a driver. It does not support Gun4IR Gui. X-Gunner Gui and the official website are under construction. You can upgrade and change the buttons yourself later. Now you can search in AliExpress: XGUNNER
This is the user manual, GUI for upgrading firmware and customizing buttons，mega.nz/file/RTIEhLhJ#gjaVnPkA85hSIeBEKBFDdkXXAGqZ3s23Z0z6qIYCbCo
So I bought the lightguns, but my lightgun build doesn't work with it. Any tutorials how to configure it? How do you calibrate the lightguns, mines off a bit.
You can ask the seller for documentation
amigo pudiste configurarlas y calibrarlas?
@@ricardogonzalesgutierrez9895 Of course it's possible
Dammm!! There’s no tutorials for this light gun. Now it’s about waiting for someone to post anything. I’m sticking with my RS3’s for now.
@@李髙澕李if possible then post a tutorial
Or is possible to play on a very big screen ? Like 65 inches or more 100 inche ?
Without fisheye ?
No need for fisheye lens, a 100 inch screen can be used within 1 meter, and a 55 inch screen can be used within 50cm
@@李髙澕李Sounds good . big thanks ! the calibration and the led works like the gun4ir right ?
@@KaliMero138 XGunner and gun4ir are different. The positioning lights of XGunner are attached to the four corners of the screen because XGunner uses an 850nm infrared light, which positions both XGunner and gun4ir on the screen. Can be used simultaneously with gun4ir,
@@KaliMero138 This is the user manual, GUI for upgrading firmware and customizing buttons，mega.nz/file/RTIEhLhJ#gjaVnPkA85hSIeBEKBFDdkXXAGqZ3s23Z0z6qIYCbCo
is it bluetooth compatible with nintendo switch ???
No, it uses 2.4G private protocol
Link to buy?
www.aliexpress.com/snapshot/0.html?spm=5261.15030979.tradeOrderItemsTable.2.24856aa6a7ZJqr&orderId=1109527234991930&productId=1005008105668409
This lightguns work in retrobat?
Yes, RetroBat is just a front-end, it just brings together all kinds of emulator games, these emulators support light guns, XGUNNER supports Dolphin, TeknoParrot, RPCS3, duckstation, pcsx2......
@@李髙澕李how can you play with the tekoparrot games mines can’t play with them, and one of my guns only moves the cursor with the joystick on the pistol after calibration
@@TheAccountant1000 In the GAME SETTINGS setting of Tekoparot, select Rawinput for the General Input API, and select HONGWEIHUA XGUNNER-P1 or P2 for the Light Gun in the Controllable SETUP setting
@@TheAccountant1000 The usage method is the same as GUN4IR
@@TheAccountant1000 This is the user manual, GUI for upgrading firmware and customizing buttons，mega.nz/file/RTIEhLhJ#gjaVnPkA85hSIeBEKBFDdkXXAGqZ3s23Z0z6qIYCbCo
For those who need more support, you can leave your email or join XGUNNER's Discord, where you can find the latest firmware and user manual: discord.gg/zQEfwjSQ
This is the user manual, GUI for upgrading firmware and customizing buttons，mega.nz/file/hLhFSCpK#VGiEVMmEMSkNKbFObm-HzAwbZFqOpiQu7s-jIYZYkB0