Thanks, I put in the oven to heat it up..... once it's all hot I screw the hose clamps down tighter because the glue softens and it can be kinda molded together and any gaps will work out...... I set the temperature to around 450 wrap it in aluminum foil to keep glue from dripping all over the inside of the oven (my wife would kill me) also to keep the wood from burning..... the temperature isn't that important whatever works for you, and depending on how large of a rosette cylinder you have.
Pin stripe power suit while glueing.... very boss!!. Its like "yeah I just brokered a multi-million dollar deal, now im gonna go clamp some wood with glue" I love it and going out to have a bespoke coverall made to have pinstripes.
Muito lindo o trabalho manual. PARABÉNS pela construção deste vídeo... Aqui no Brasil trabalho num museu que expõe a história da madeira, e em parte do acervo tem trabalhos feitos em marchetaria da década de 1950....
I want to thank you for sharing this knowledge with us amateurs. Question regarding what I see when you clamp up a single log. Are the veneers lying flat on the gig, meaning that you are then pressing sideways on the veneers when squeezing the glue out? You don't show how the sides of the finished log are tapered to take the angle of the rosette circle. You don't by chance set this angle when you squeeze the log with that sideways pressure??? That would be cool!
Once I glue and clamp the cylinder I heat it up the glue and it becomes soft. I then apply more pressure with the hose clamps and it goes together nicely. Then I let it cool down.
@JMichaelThames Yes, the side angle was question, and the orientation of the veneers in the little clamping jig. I was thinking yesterday that the with the large number of individually made logs that go into the layup of your rosette production, that your single log clamping jig must produce a fairly consistent log each time. It's a wonderful piece of work. Thanks for commenting.
Thanks for making this video. I would like to make a series of rosettes for my guitars and I would like to know how long in the oven, what temperature and why?
I'm not quite sure what you mean. But yes I think. To answer your last question the jig I clamp the final veneers in has an angle already in it that matches the angle.
good video, hoping or rather sought, apart from the work itself, saying that is used to do the job, that wood? that glue? the time it takes everything, as the work is beautiful and worthy of admiration, but is just that; when I read: How to make thought it was real, I say this very well, just that would be better if given more knowledge, thank you, I hope you understand well use the translator, PS would be very good that Mr. luthier can tell us all their experiences, and thanks again
I cut them like salami on a bandsaw, however you must glue a straight piece of wood to the opposite side of the cylinder, never try to cut just the cylinder in the bandsaw. very dangerous.
Michael Thames Wonderful video thank you. Is that mechanism on the drill press meant to radius the thickness of the Veener slices or is that just a general thinning technique.
you don't dress up when in the shop? I like to wear a three piece suit, or a full on beef eaters uniform if i'm feeling festive. Always look your best i say.
He somehow managed to get glue everywhere except his suit coat. He does beautiful work, but he'd be a terror with superglue ("Help! I can't reach the de-bonder!") Lol!
Not his hand but the tip of fingers. It is set to probably less than 2 mm thickness, so can't cut a hand. There no other why to do it other than probably cnc or precision table saw, which is more dangerous. I'm doing this at this moment, any tip to avoid risking my index welcomed.
@@crancarenotafish 2mm off a nail on his right hand and he'll need to relearn how to pick until it grows back. 2mm off a fingertip on his left hand and he won't be playing for months. All because he didn't lock down the table on his band saw. Of course he's probably been using it like that since 1992....
Too bad the part where the player mutes the part of the "trumpet fanfare" sounds a bit "fart-ish" ; that guitar needs to pass gas but overall it's good playing....ha!
Azt gondolná az ember a szalagfűrész libikókázó munkalapja és az oszlopos fúróba befogott csálézó vékonyító csiszoló láttán, hogy ebből nem sok jó sülhet ki. Aztán a végeredmény mégis döbbenetesen aprólékos és hajszálpontos. #gitár #guitar #rosette #rozetta
So, you married a potential murderer, who tells you what you can & can't wear? Sounds scary. Time for a divorce, methinks. :p Agreed on the "helpful video" bit though. Looks pretty time consuming, but the end result is very nice.
So this is WHY I've been hording all this veneer and exotic scrap
Thank for sharing your craft, and wow that's a sweet rosette
Could watch this guy for hours. Excellent!. And very reassuring to see a luthier with glue on his hands too.
I got the jist of your technique better after watching it for a second time thanks michael
Nice video. Beautiful rosette. Thanks for sharing.
Excellent!
Very interesting to see the process as a guitarist. This is more creative than the other approaches I've seen.
Surprisingly simple. I imagine you could use these techniques for many types of work.
I did not realize so much effort goes into making a Rosette. ONe day hopefully i'l be able to buy one with a beautiful rosette.
Great artwork .salute luthier
Excellent tutorial with great theme music. Thank you v much!
Di solito gli artigiani sono gelosi del loro lavoro, grazie Maestro per quello che ci regali.
fantastic! thank you for the information, you work so calm and is a joy for us to see a master at work.
inspired to begin learning.....thanks
Thanks, I put in the oven to heat it up..... once it's all hot I screw the hose clamps down tighter because the glue softens and it can be kinda molded together and any gaps will work out...... I set the temperature to around 450 wrap it in aluminum foil to keep glue from dripping all over the inside of the oven (my wife would kill me) also to keep the wood from burning..... the temperature isn't that important whatever works for you, and depending on how large of a rosette cylinder you have.
i enjoyed every second and learned some beautiful stuff and ideas
Belo trabalho .
Uma obra de arte essa rosácea.
Parabéns.
Beautiful work Michael! Brazilian greetings.
With your tips will try to do my own rosettes
thank you
Beautiful work!
Que bonito trabajo, felicidades.
Absolutely superb!
Beautiful.
nice work. Thats a lot of work
Pin stripe power suit while glueing.... very boss!!. Its like "yeah I just brokered a multi-million dollar deal, now im gonna go clamp some wood with glue" I love it and going out to have a bespoke coverall made to have pinstripes.
Lindo trabalho, perfeito, parabéns!
Utterally inspiring
Muito lindo o trabalho manual. PARABÉNS pela construção deste vídeo...
Aqui no Brasil trabalho num museu que expõe a história da madeira, e em parte do acervo tem trabalhos feitos em marchetaria da década de 1950....
Uma incrível obra de arte!
thanks for making this video, helped me a lot on my guitar making course... :o)
Thanks Tony!
Thank you very much for the answer!
I want to thank you for sharing this knowledge with us amateurs.
Question regarding what I see when you clamp up a single log.
Are the veneers lying flat on the gig, meaning that you are then pressing sideways on the veneers when squeezing the glue out?
You don't show how the sides of the finished log are tapered to take the angle of the rosette circle. You don't by chance set this angle when you squeeze the log with that sideways pressure??? That would be cool!
Exelente artisans
amazing thank you
great job ^:)
how do you proceed to cut those rosettes into individual ones ? amazing work by the way
Otimo muito bom
es madera de balsa las que parecen planchas chiquitas? que madera se usa para este trabajo?
cool!
wished you had video on the slicing. :)
Once I glue and clamp the cylinder I heat it up the glue and it becomes soft. I then apply more pressure with the hose clamps and it goes together nicely. Then I let it cool down.
@JMichaelThames
Yes, the side angle was question, and the orientation of the veneers in the little clamping jig.
I was thinking yesterday that the with the large number of individually made logs that go into the layup of your rosette production, that your single log clamping jig must produce a fairly consistent log each time.
It's a wonderful piece of work.
Thanks for commenting.
@mrbannon0 Hey,
I don't know if you ever figured out what song that was, but I just found out that it is "Sadaude" by roland dyens.
Really nice rosette
How many did you get out it?
Once you have glued your first rings of veneer how do you accomodate that radius into the tiles?
Cheers, Paul
👍👍👍 👏👏👏🏆🏆🏆🏆🏆 LIKE nº 999 - Curitiba/PR/Brazil
beatyfull music what is the theme?
Thanks for making this video. I would like to make a series of rosettes for my guitars and I would like to know how long in the oven, what temperature and why?
Long enough to see some glue bubble out.
I seen you put the rossette in the oven, isn't that going to ruin the glues strength?
I'm not quite sure what you mean. But yes I think. To answer your last question the jig I clamp the final veneers in has an angle already in it that matches the angle.
what are the squares of the begining made of??
beutiful... is that paper you're using or wood veneer?
Wood
👍👍👏👏👏
It's water to keep the wood from swelling just on one side.
@JMichaelThames how do you detach the wood cilinder from the rosette
How many did you get from the log?How thin you slicing them before install?
hello, why did you spray them with water at the begining?
"Would you like extra veneers with that?"
LOL jks, the video was amazing....thanks :D
Here's an actual question not a dumb remark - why do you put in in the oven? how hot? how long? Thanks.
It's an old blazer, you should see just how good I look when I go out in public...... girls go crazy for a sharped dressed man!
2:13
"oral B, number one luthiers choice!"
what's the spray right in the beginning?
the owner of the glue factory gonna be very rich man because this man making a few rossete XD
Mas como cortar depois?
Could somebody please tell me what piece is being played at 7:48? It's not Gran Jota, as far as I know.
what is the song that starts around 9 minutes in?
What temp. was your bake out of the rosette?
+Dwayne Kutz 400
Remember kids, for best results, only put your rosette cake on the top rack and bake until golden. Never broil!
Parece q fuera papel fomi e eso?
This video was sponsored by tightbond 😂😂
good video, hoping or rather sought, apart from the work itself, saying that is used to do the job, that wood? that glue? the time it takes everything, as the work is beautiful and worthy of admiration, but is just that; when I read: How to make thought it was real, I say this very well, just that would be better if given more knowledge, thank you, I hope you understand well use the translator, PS would be very good that Mr. luthier can tell us all their experiences, and thanks again
Alatl lekukan guitar klasik
what a messy job... but results are wonderful
Does somebody knows how's the second theme named? :D
José Antonio Mtz. Saudade 3 by Dyens
El vídeo regular pero la música de arte
Клей надо равномерно наносить на склеиваемые поверхности .
at first i thought he was making baklava.
Ha!
the part when you bake the cake
I cut them like salami on a bandsaw, however you must glue a straight piece of wood to the opposite side of the cylinder, never try to cut just the cylinder in the bandsaw. very dangerous.
WHERE IS THE VIDEO SHOWING HOW TO CUT THE ROSETTA FROM YOUR STOCK PIECE ??**DR KEL
lol your comment made my day :D
How do you get the wood so thin? I refer to those rectangular sheets that go on?
Buy veneer, or I thin it on a drum sander.
Thanks
Michael Thames Wonderful video thank you. Is that mechanism on the drill press meant to radius the thickness of the Veener slices or is that just a general thinning technique.
you don't dress up when in the shop? I like to wear a three piece suit, or a full on beef eaters uniform if i'm feeling festive. Always look your best i say.
I think you should be more generous with the glue.
He somehow managed to get glue everywhere except his suit coat. He does beautiful work, but he'd be a terror with superglue ("Help! I can't reach the de-bonder!") Lol!
Nice job but to many glue
Oh dear- those fingers so close to that shaky bandsaw blade- please don't try that at home. One slip, and there goes your hand......
Not his hand but the tip of fingers. It is set to probably less than 2 mm thickness, so can't cut a hand. There no other why to do it other than probably cnc or precision table saw, which is more dangerous. I'm doing this at this moment, any tip to avoid risking my index welcomed.
@@crancarenotafish 2mm off a nail on his right hand and he'll need to relearn how to pick until it grows back. 2mm off a fingertip on his left hand and he won't be playing for months. All because he didn't lock down the table on his band saw.
Of course he's probably been using it like that since 1992....
La j de dolores
02:14 oral-B reklam
Too bad the part where the player mutes the part of the "trumpet fanfare" sounds a bit "fart-ish" ; that guitar needs to pass gas but overall it's good playing....ha!
I prefer to build with Stodoys plans.
Azt gondolná az ember a szalagfűrész libikókázó munkalapja és az oszlopos fúróba befogott csálézó vékonyító csiszoló láttán, hogy ebből nem sok jó sülhet ki. Aztán a végeredmény mégis döbbenetesen aprólékos és hajszálpontos.
#gitár #guitar #rosette #rozetta
Claws him to cut the hair ...
who wears a blazzer in a woodshop using glue?
hes gonna ruin his suit.
Да-а, геморрой ещё тот
So, you married a potential murderer, who tells you what you can & can't wear? Sounds scary. Time for a divorce, methinks. :p
Agreed on the "helpful video" bit though. Looks pretty time consuming, but the end result is very nice.
terrible music by Tarrega
Thanks for your dumbass comment.
Que música más aburrida
Finnish the fucking story!!!!
I wanted to pull my own head off listening to that terrible guitar .
Why didnt you?
che palle la Gran Jota di Tarrega...