EXTREMELY RUSTY CAR, surprise under the fender liner.inner and outer of Rocker panels Repaired👍
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- This 2011 Ford Fusion had an extremely rusty Rocker panels and some surprise under the fender liner.
this car got repaired properly and the customer was very satisfied about it.👍
What this guy does is art of auto repairing . not many people can do this job today !
Thank you so much for your kind words.
Ive got a charger with this same issue. I'm willing to pay to fix it right becuase i love the car. Where you located
@jc2478 I am located in peoria Illinois. I will be more than happy to fix your car 🙏🙏
Not bad my guy. Not bad at all. A little discrepancy in the jamb on the right side but much better than I and most can do! Especially using sheet metal instead of prefabbed parts! Good work brother
Thank you so much for commenting and supporting the channel. The process was about 17 hours of work. I tried my best to choose the important part of each episode and make it under 9 minutes video. I misplaced the last two episodes and that caused some discrepancy. Since it was my first video, I will do better job as far as uploading the videos to have better idea of the repair process and not create any confusion. Thank you again Brother.🙏🏼🙏🏼
Like so many others who commented, I am impressed by the quality of your workmanship. Well done! I am wondering, though, if there shouldn't have been some drain holes put into the panels for water and leaves and debris that runs off the windshield and down the venting alongside the bottom of the windshield and down to the panels. Those FACTORY holes in the panels become plugged -- they should have been made bigger at the factory -- and are a major cause for the rusting to have occurred in the bottom panel and door opening in the first place. That's my opinion anyway.
Thank you so much for taking the time to write a wonderful and true comment. I totally agree with you. the holes were so small and they get blocked by time. I made sure to coat the interior section of the rocker panel with primer,undercoating urethane, and cavity wax to prevent any condensation or rust.again,thank you for commenting 🙏🏼
Prevention is key, this video describes how to:
th-cam.com/video/uHMpJebGx_g/w-d-xo.html
Dude that's awesome! Applying the skills we learned in Auto Collision Repair! Miss seeing you buddy!
Miss you brother.
Hey Ali, what's the name of your shop? I know you're at Peoria Illinois and I would like to take my Ford Fusion 2012 for you to take a look at it
@@luismanuelbarrerabadillo3131 I do work for Maaco peoria. It is the only Maaco in town. Thank you 🙏🏼
what about rust protection on the inside of that freshly repaired patch?
in just 2 to 3 years time it'll be worse than before...🤮
I applied primer all over the inside panel and added cavity wax through the drain holes using a 360 degree nozzle to make sure that the cavity wax(corrosion protection material)cover the entire inside panel.🙂
Respect. Great Job
@huffel1000 thank you so much 🙏🏼
Very Impressive work! Great Job! I need this done, where are you located lol!
Thank you for your kind words, Sir. We are located at peoria, IL
... The service remained very good colleague !
A strong embrace and excellent thursday !
Thank you so much for supporting the channel🙏🏼🙏🏼
🔥🔥🔥🔥🔥🔥l 😎😎😀😎😎😀
Ja uvijek prije punila stavlja Epoxy primer 2k, nakon toga punilo, ili pasta za lemljenje i kositar pa sve ostalo kako vec ide...
How much does a repair like this usually cost?
It depends on the shop's labor rate for body work and paint. I work in this shop as a body tech and I don't write the estimate so I am not sure what we charged the customer.thank you for supporting the channel.
One hole, little rust, couple of years without noticing and that happens.
Well i am gobsmacked i thought that cars didn't rot these days how wrong was i my vauxhall combo is a 55 plate and still solid under neath
Nicely done. I'm about to start similar work on my old Jaguar, both ends of both outer sills rotted out.
Good luck with your next project and thank you for supporting the channel 🙏🏼🙏🏼
Excellent job ! 👍
Thank you for supporting the channel 🙏🏼
عاشت الايادي الله يعطيك الصحة والعافية يامعلم وفنان 🙏🏻 🇩🇪🇮🇶🙋♂️👏🏻👏🏻👏🏻
شكرا جزيلا لتفضلكم بالمشاركة والتعليق وأسأل الله أن يحفظكم. 🙏🏼
I need this exact! type of repair on my car. Now if I can just find someone like Ali to do it. Ali is a craftsman...he takes pride in his work, and does an excellent job!! job. 👍
Thank you for you kind words. I do my best not to take short cuts because as how I work hard people also work hard to make money and spend to repair their cars. We are located in peoria IL,thank you again for supporting the channel. 🙏🏼
good job.but why film it like wacky races could not see what he was doing .
The actual repair time it took 17 hours of work. I deleted so many hours and edited the important steps only,hope you understand that not many people have the patience to watch a 17 hours video,.thanks for watching and supporting the channel 🙏🏼
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thank you so much 🙏🏼🙏🏼
🙏🙏🙏
In Europe they will charge you $1000 at least for that job, and give you bare metal without plaster and paint finish.
Thank you for supporting the channel 🙏🏼🙏🏼
I am stunned by the result of your work at the end; it is an art 👍
what about the place for the lift?
It is supported by a thicker gauge plate to lift the car safely.
A 1st class job nice to see a craftsman that knows his craftsmanship a lot of cowboy's out there.👍👍👍👍
Thank you for supporting the channel 🙏🏼
Thanks for your kind words 🙏🏼
Word Damnskippy an awsome ,rust removal ,body repair and automotive paint job.
I wonder how much that would cost you to get done
I got about 30 hours to do both sides. I wish i could tell you exactly how much, but I work in the shop, and the office does all the deals with the customer. Thank you for supporting the channel 🙏
Ali, you should post a video of your shop, and let your viewers know what city your working in...if you're in michigan, Id bring my car in for rust repair that is very similar to this, shown in the video.👌
Sure I will, we are located in Peoria IL. thanks for supporting the channel and I promise I will make more valuable videos. 🙏🏼🙏🏼
On my Chevy van big rust on lower under doors rocker panels I got some ABS black plastic 6 in and ran it through a table saw cut it in half. Two pieces the length from tire to tire. Drilled out resessed holes in top and Screwed in self tappers.. Black Caulk the top. Underneath I bent 5 bolts connected to anything. It's ugly Rusty mess but it worked and it will never rust there again.
Oh I forgot I used old engine oil in a spray bottle mixed with some paint thinner and sprayed all the underneath before I started.
For other projects, If you want free metal just find a commercial metal shop dumpster. If you get lucky you'll find the primed and painted with the plastic film overlay.
Thank you for your comment and your support to my channel 🙏🏼🙏🏼
Con todos los materiales y herramientas. Y la buena voluntad para hacerlo. "Felicidades"
fto have done it in under 10 minutes im impressed lolol.. jk.. all jokes aside. great job. having to fabrication your own panel is a pain in the butt.
Thank you so much for your kind words. Thank you for supporting the channel 🙏🏼🙏🏼
Where did you get the replacement rocker panels? I also have a fusion and will be doing this eventually.
LKQ is a part company,I think my boss got it from them. Check any auto parts manufacturer.good luck 🙏🏼🙏🏼
Лютый мужик! Отхерачил всё лёжа на земле😮💪👍👍👍
Thank you so much for your kind words 🙏🏼🙏🏼
@@Autobody.repair.with.ALJWAD very good 👍
What type of cutter is being used for the plug welds.
Thank you for commenting and sorry for the late answer, the holes of the plug welds are 8mm.
I meant 8mm drill bit
@@Autobody.repair.with.ALJWAD Okay thankyou for getting back always wondered what the best size would be👍.
amazing work!!
Thank you for supporting the channel 🙏🏼
Very good skills.
Thank you 🙏🏼
Really amazing job. Removing all rust And then starting welding parts
Thank you brother and Ramadan Mubarak 🙏🏼
Drill a drainhole in the inner section if possible spotweld lowwerside if not then drill 8mm holes before you put it on the car and if done correct welding you don't need to put fiberglass on the panel and wax the inside after painting
I made sure to drill a drain hole, the welds done correctly but I plug welded because there is no spot weld machine in the shop also, I sprayed cavity wax inside the panel using a 360° spray tip.the reason I put fiber glass is because the panel I received was defective so I had to re-fabricate the panel and that caused deep dings and hammer prints.i couldn't show every step of the repair process because of the length of the video(17 hours). I had to remove some important content to make the video less then 10 minutes.also,the low quality of the camera of my phone played a bad role too.
Thank you so much for sharing your experience and i am always grateful to read any valuable information that makes the job better.thank you for supporting the channel. 🙏🏼🙏🏼🙏🏼
Absolutely Fabulous Job.
Wish Your Shop Was Near Me. ❤
Thank you for your kind words. I am in peoria IL. Will be glad to serve my audience cars specially around the peoria area 🙏🏼
Well done Ali, you are a gifted sheet metal worker ! (Fixing the sxxt of Ford)
Thank you so much for your support 🙏🏼🙏🏼
How much rapiar inner rockets
How much would it cost to do this job? I have one with the same issues but it would probably cost more then what the car is worth! Outstanding workmanship!
I realy don't know exactly how much the owner of our shop did charge the customer. All what I knew that it was very sentimental for the owner of the car to fix it regardless the cost,thank you for your great support to my channel. 🙏🙏
At a meager $65/hr x 17hrs = $1105, plus (modestly) $200 in paints, $50 supplies, $75 materials = $325 x 25% for overhead = $406.25 @ $1511.25 + tax
Хорошая работа, молодец
Nice work
Thank you🙏🏼
Where are you based out of?
Amazing job!!! Keep up the great work
Thank you for your great support 🙏🏼🙏🏼
What guage sheet metal did you use?
The inner and the outer parts came as gauge 20 but I added a flat bar in between for the jack spot that is thicker gauge(gauge 18) to make sure it is safe to lift the car with no problem.
Thanks for supporting the channel 🙏🏼🙏🏼
Yes apart from the drain hols a first class job fabricating that sill end result looks brand new 😊all the best to you
Thank you for your support 🙏🏼🙏🏼
Thank you for your encouragement 🙏🏼🙏🏼
Great job carried out there, well done 👏 ✔️
Thank you Sir for your support 🙏🏼🙏🏼
Brilliant work 👏 looks amazing
Thank you for supporting the channel 🙏🏼🙏🏼
Nice job but don't put you jack on that lower edge
I made sure to weld a thick gauge metal as a supportive bar to allow the jack to lift the car with no problem. This is not a plastic surgery. Thanks for sharing your concerns 🙏🏼
@@Autobody.repair.with.ALJWAD good job
Impressive
Thank you so much.
Wow. I like your work.
Thank you for supporting the channel 🙏🏼🙏🏼
Very good work ......
Thank you so much 🙏🏼🙏🏼
عمل متقن❤❤❤❤❤
بارك الله بك وشكرا لدعمك القناة وعيدكم مبارك وكل عام وانت بخير. 🙏🏼🙏🏼
What thickness sheet metal did you use?
The rocker panel outer part that I received came as 20 gauge. Also,the rear sectioning plates were 20 but the middle flat bar that can hold the pressure of the jack is gauge 18 to increase the strength.
@@Autobody.repair.with.ALJWAD thank you for the information about the sheet metal.
@@clearsailing7993 my pleasure 🙏🏼
quality job.
Thank you so much 🙏🏼🙏🏼
Nice job!!!!
Thank you for supporting the channel 🙏🏼🙏🏼
excellent work!
Thank you so much for you support 🙏🏼
Excellent job
Thank you for supporting the channel. 🙏🏼
It's a really great job. Just a question: What is the average cost for this maintenance?
Отличная работа!
Thank you very much🙏🏼
Спасибо
Nice job mate 👍🇬🇧
Thank you for supporting the channel 🙏🏼🙏🏼
A spatula for raw sheet metal?
Price?
Not sure exactly how much our shop charged the customer.
Good Jop. Perfekt,
Thank you for supporting the channel 🙏🏼🙏🏼
Главное шпакли побольше
Thank you for supporting the channel 🙏🏼
its a ford what do you expect fords are well known as rust buckets
Unfortunately it is true.
@@Autobody.repair.with.ALJWAD now from my experiance peugeots do not rust
i have a 15 year old 308 the only bit of rust is the rear axil the underboddy is like new, why do people ditch peugeots they are very reliable engines
It depends where you live.salt,and weather conditions such as snow it vary in each state 👍
@@Autobody.repair.with.ALJWAD i live on a island in the uk we use salt t grit our roads as well. we also have the salt from the sea that comes over the only road on and of the island.
my 14 year old peugeot has no rust and it has never been parked over night in a garage.
i rince down the underside every month in the winter with a garden sprinkler and after the summer.
you see i am not lazey
Everything rusts goof, ever see a Chevy Silverado rockers after many years
All that work for a disposable POS Fusion lol!
Yeah but it's still a customer car man.
280,000, miles on mine and it's still running strong but it does have rust in that exact same spot. Never left me stranded or on the side of the road