Seat came out really nice. Next winter I plan to restore my brothers 1978 TS185. I restored my 1976 Honda XL175 this past winter... put videos of the restoration up too.
I continue to love your channel and enjoy your videos. Helpful tip: Try NAVAL JELLY for rust removal. It is ASTOUNDING, how well it works. Question: Great Hispanic-like guitar music: Is the guitarist copying “On The Floor” by Jennifer Lopez, or did Jennifer Lopez copy the guitarist for this melody?
I used to do that with hairspray cans all the time when the potatoes ran out. Note- if you spray a can with hairspray and light it, you have enough time to walk away and shoot it.
You did a fine job. But since you asked... I would have changed the cushion. you can usually get something better. Plus I'm always paranoid about all the rust stuck to the bottom of the old one. Again, you did a great job it won't be a problem
hey gold guy liking your channel so far ...heres a tip for you if you need to remove the cheapest solution ive found is vinegar ... it works good and dare i say better than some of the store bought rust removers... as with all chemical rust removers flash rusting does occur ... new sub
to answer your question about water going under the seat it's easy, water goes every-f***king-where ^^ Do you know you can unrust stuff with electrolysis ?
Hey man i have an Yamaha dt from 90's. I recently drove a long journey untill throttle stuck. The cable is not stuck, and i checked both cable housing and carburator and it's not the issue. Also gas cable slides fine, everything actually seems alright, what could be the reason for my bike is taking full throttle when i start it?
My Scooter was stolen and the police got it back for me. Only problem is the seat was gone and the company don't make them anymore. If you find a seat for a 2004 KYMCO People 250 Scooter...PLEASE let meknow. I've been looking for 3 months. Even bought a wrong sized seat from ebay and threw it away. 70 dollars. thank you.
Please sort out the junk and build some shelves and cubbys.. Order and system is essential for smooth work environment. Your work flow will be faster too cause everything has a home and you know where it is. Plus its a little rough on my eyes seeing mounds of junk in you shop.. Please do it for me if not for yourself ;-)
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
This is the true Wrecked Bike Rebuild series on TH-cam!
Seat came out really nice. Next winter I plan to restore my brothers 1978 TS185. I restored my 1976 Honda XL175 this past winter... put videos of the restoration up too.
That will look way better now on the ts185; nice job!
That was fun to watch! Thanks GoldGuy! It turned out Awesome.
Thanks Don!
Thank you, that was the motivation I needed to get stated on my seat!
Great job mate you getting there it going to be a,fab build
LOVE LOVE LOVE! Been thinking about doing this on my dad's bike.
I continue to love your channel and enjoy your videos. Helpful tip: Try NAVAL JELLY for rust removal. It is ASTOUNDING, how well it works. Question: Great Hispanic-like guitar music: Is the guitarist copying “On The Floor” by Jennifer Lopez, or did Jennifer Lopez copy the guitarist for this melody?
I do learn something every time I watch one of your videos. Thanks
I used to do that with hairspray cans all the time when the potatoes ran out.
Note- if you spray a can with hairspray and light it, you have enough time to walk away and shoot it.
Amazing job. Looks great. I have always been afraid to work on seats.
That seat looks good man! Of course we enjoyed the video! Keep em coming man :)
Nice job kid! Came out pretty nice!
How come you didnt swap the hinges to the other side while the seat base was bare? Anyways another great vid gold guy, always fun to watch your vids 👍
Love the end, that seat turned out great 👍
Hahaha thanks man
Nice job on the seat and pan. Came out awesome 👍🏼👍🏼
Thank you Moto werx!
Lucky these videos are on TH-cam thanks!
Can’t wait to hear this thing run! 🏍💨
Me either lol!
You did a fine job. But since you asked... I would have changed the cushion. you can usually get something better. Plus I'm always paranoid about all the rust stuck to the bottom of the old one. Again, you did a great job it won't be a problem
Looks very nice 👍 great video mate
Great work on the seat restoration, the seat pans are always the worst, water gets up in there some how and just rots them out
Good job bro..and I did learn something..thanks
badass awesome result !
Thanks ichiban!
Good job , well done !!
hey gold guy liking your channel so far ...heres a tip for you if you need to remove the cheapest solution ive found is vinegar ... it works good and dare i say better than some of the store bought rust removers... as with all chemical rust removers flash rusting does occur ... new sub
Great video ! just what I needed
$20 plus rust remover, plus paint, plus thinners, plus apoxy resin. Total cost?
Looks good 👌👌
Nice job, love your videos!
Keep up the good work, regards from Croatia!
I gotta do this to my 74 ts185 so thanks for the video
Love the guitar music!
Gopherdave1 I also love that guitar music!
Oujeah LAMBADA is back!
Came out great! That font tho...
wow looks really good!
Thanks!
Looks great 👍
to answer your question about water going under the seat it's easy, water goes every-f***king-where ^^
Do you know you can unrust stuff with electrolysis ?
great job
Came out sweet 👍
nice work
Finally I can stop pissing my mom off 😂
Cool Vids Brother!!
looks good, but donating parts? 😂 wish you good luck, maybe in your country the people are more generous then over here.
nice! looks great!
Wicked cool
Hey man i have an Yamaha dt from 90's. I recently drove a long journey untill throttle stuck.
The cable is not stuck, and i checked both cable housing and carburator and it's not the issue.
Also gas cable slides fine, everything actually seems alright, what could be the reason for
my bike is taking full throttle when i start it?
Piston pull back springs need lubrication.
The only problem is my seat pan is so rusted there is no seat pan just a bunch of rust flakes
My Scooter was stolen and the police got it back for me. Only problem is the seat was gone and the company don't make them anymore. If you find a seat for a 2004 KYMCO People 250 Scooter...PLEASE let meknow. I've been looking for 3 months. Even bought a wrong sized seat from ebay and threw it away. 70 dollars. thank you.
3:17 damn it “nut” again
I love how he got a seat donated but u would have to pay shipping for his rotten piece
i want it
Too bad that you didn't use the original seat base
Is it someone who knows what the song named?
Vote for Pedro
2:47 hehehehehe
Settle down Beavis!
Why dose he sound like me beast
Check out Cameron Niemela
Please sort out the junk and build some shelves and cubbys.. Order and system is essential for smooth work environment. Your work flow will be faster too cause everything has a home and you know where it is.
Plus its a little rough on my eyes seeing mounds of junk in you shop..
Please do it for me if not for yourself ;-)
Some people actually work better that way. I like all my stuff organized but whenever I get it that way I can never find anything. Lol
For the next video: We who are watching, the annoying background music is worse then getting nuts stuck in the socket... please f-ing stop using it.