How to wire the EG starts arcade buttons to your encoder for an Arcade mod or fresh build.

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 34

  • @daveeagle2721
    @daveeagle2721 ปีที่แล้ว +1

    Hey guys until I have a better setup I’m using this board in my virtual pinball machine. One problem I noticed is that if you get extra long cables (hx2.54 3-pin) cables for the buttons with leds the buttons will not work. I’m not sure if this has something to do with the way the board works or if it is a rising state on the button. Any thoughts?

  • @gaboaaa23
    @gaboaaa23 7 วันที่ผ่านมา

    hi, so how can i set the hot key for the raspberry pi? Cause i want to use these buttons with the pi.

    • @retrolizardscustomarcades
      @retrolizardscustomarcades  6 วันที่ผ่านมา

      Yeah man. Just set the player 1 select/coin button as your hot key.
      Then to exit a game press coin and start at the same time

    • @gaboaaa23
      @gaboaaa23 6 วันที่ผ่านมา

      @@retrolizardscustomarcades I see. So you can set it? Cause in the video i got the impression, that its not possible on the pi.
      My buttons arrive today then ill set them up.
      Are they responsive? Cause im affraid they want be any good.

  • @beldav97
    @beldav97 3 ปีที่แล้ว

    Great video will help alot on my build thanks

  • @marcocotena8527
    @marcocotena8527 3 หลายเดือนก่อน

    Hi, eg stars works with led blinky?

  • @Tanathos2
    @Tanathos2 ปีที่แล้ว

    What is the purpose of the 5v red slots? Is it powered by usb?

    • @retrolizardscustomarcades
      @retrolizardscustomarcades  ปีที่แล้ว

      It is. If you have buttons that require a separate power then you can plug into that slot.

  • @foxmulder5438
    @foxmulder5438 2 ปีที่แล้ว

    the quality is good? industrias lorenzo?

  • @rolejarczyk
    @rolejarczyk 2 ปีที่แล้ว

    I'm looking at using the EG starts 2 player kit, but am having trouble figuring out the arcade OS part, or using my old PC for it. What software do you use that is compatible? Great video

  • @castro1186
    @castro1186 2 ปีที่แล้ว

    Can you add a trackball to the eg starts kit when using a raspberry pi?

  • @Jerry251
    @Jerry251 3 ปีที่แล้ว

    How do you get power to all 4 usb encoders? Is there a special product or power supply? Or do you plug them into the raspberry pi?

    • @retrolizardscustomarcades
      @retrolizardscustomarcades  3 ปีที่แล้ว

      These buttons plug into the raspberry Pi for power.

    • @Jerry251
      @Jerry251 3 ปีที่แล้ว

      @@retrolizardscustomarcades the raspberry pi I have only has two usb slots how do you plug the other two in?

    • @retrolizardscustomarcades
      @retrolizardscustomarcades  3 ปีที่แล้ว

      @@Jerry251 you need a different raspberry Pi. The one I’m using in the video is a Pi3B+

    • @retrolizardscustomarcades
      @retrolizardscustomarcades  3 ปีที่แล้ว

      @@Jerry251 the Pi4 also has 4 ports

    • @Jerry251
      @Jerry251 3 ปีที่แล้ว +1

      Ohh ok thank you.

  • @scoobykerr77
    @scoobykerr77 3 ปีที่แล้ว

    Hey Retro Lizard I have a modded 1up with pie, I'm trying to use the two controllers and a wireless usb controller, problem is that the pie keeps trying to make the usb controller player 1??? Can you help?

    • @retrolizardscustomarcades
      @retrolizardscustomarcades  3 ปีที่แล้ว

      Because every time you turn on the wireless it’s switching inputs. Use wired only.

    • @scoobykerr77
      @scoobykerr77 3 ปีที่แล้ว

      @@retrolizardscustomarcades thanks, trying to get Final Fight to work but not sure what emulator? Any good resources for finding this out?

    • @retrolizardscustomarcades
      @retrolizardscustomarcades  3 ปีที่แล้ว

      @@scoobykerr77 if mame, try all the mame options until it work. Usually mame 2003 or 2010

  • @KaoticBPR
    @KaoticBPR 3 ปีที่แล้ว

    Hey retro, modded my NBA jam exactly like yours. The info I'm looking for and seem to missing is, how am I going to power on and off this cabinet since we are removing the stock power switch and volume switch.

    • @retrolizardscustomarcades
      @retrolizardscustomarcades  3 ปีที่แล้ว

      Hey man, plug everything into a power strip and pick up a remote outlet from amazon.

    • @retrolizardscustomarcades
      @retrolizardscustomarcades  3 ปีที่แล้ว

      BN-LINK Wireless Remote Control... www.amazon.com/dp/B07FK5SP9H?ref=ppx_pop_mob_ap_share

    • @retrolizardscustomarcades
      @retrolizardscustomarcades  3 ปีที่แล้ว

      @Customs correct.

    • @Jerry251
      @Jerry251 3 ปีที่แล้ว

      So this might be a dumb question, but where do the encoder boards plug into to get power? I’m trying to do a upgrade but I can’t figure out the power for the boards?

    • @KaoticBPR
      @KaoticBPR 3 ปีที่แล้ว

      @@retrolizardscustomarcades thanks for the reply. Just now seeing it because my notifications were turned off but hey I did exactly as you said anyways. But I subscribed to you instantly because of this tutorial but also more of your builds too because they are inspiring

  • @TheArtrobi
    @TheArtrobi 7 หลายเดือนก่อน

    Thanks man

  • @VegaSpydr
    @VegaSpydr 2 ปีที่แล้ว

    Yeah but why don’t the lights work?

    • @retrolizardscustomarcades
      @retrolizardscustomarcades  2 ปีที่แล้ว

      Not sure what you’re referring to man. When you plug these specific buttons into the encoder and plug the usb into the pc or pi, they light up.