Do Paderson single length shafts Work?
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- Joshua from Toledo allowed me to hit some of the single length clubs I corrected for him. We installed some Paderson Single length shafts into some sterling heads. How did they work and how do the single length irons work?
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
![ตีสิบเดย์ [FULL] | นางเอกหมอลำเงินล้าน "อุ๋งอิ๋ง เพชรบ้านแพง" & ไฮโซสาวสุดฮอต "ลิลลี่ เหงียน"](http://i.ytimg.com/vi/jPxQS_EgrJ4/mqdefault.jpg)
Very interesting. There are so many choices out there now. Manufacturers have really stepped up their game. Kinda makes your head spin when you’re in the process of getting new clubs.
Good dispersion. And good yardage gaps. Where I struggled with single length is with PW, GW, SW in single length - especially with touch shots/half shots etc. I had Sterlings.
I had the opposite, I love the short irons and wedges...do not care for the 5 and 6 irons. I have never felt comfortable with anything less than an 8 iron...the longer wedges have helped me tremendously. Edit to add...I play Edel SLS01 irons.
Great Video! Thank you 🔥👏💪🫶
I started playing the Pinhawk SL irons about 1 and 1/2 years ago (the entry cost was much lower). I will playing one length for now on. Using same shaft for all. mid kick graphite, +1 length.
👍🏻 you know it. 🤘🏻😎🤘🏻
Mac never said what iron heads he was using
@@termides In the notes he says Sterling Heads
I'm going too get fitted in uk for the new eq heads after lockdown glad you mentioned them as I regard your opinion highly
I thought I was the only one to hit balls in the simulator wearing my apron.
good content!! you really need to consider a bloopers and outtakes video!!! LOL see ya this evening on the live stream
it would be mostly burps and me calling out to Mrs McGolf for info lol
Good content, I play Yonex ADX tour irons forged with their LTB600 Boron reinforced graphite shaft stiff (circa late 90's). The feel is amazing. I would like to see some content on the evolution of graphite shafts and how the new shafts compare to early shafts.
It's funny this is coming up again. I have been looking at the 1 length hybrids lately.
Happy New Year Jim and Robin!!!
there is something to it. But you have to be mentally prepared for it. if you listen closely I talk about direction as if the 5 iron is long and I fade as I normally do. But its the same length!!! That would need to be adjusted for sure.
@@McGolf thanks Jim. Currently I go from Driver to 2 iron (PING driving iron) then 4-LW. I have done really good with that set up and do not really have any "gaps" that need filled, however it is something to try. I am building an Adams 3 wood and looking for a hybrid to see if there would be a benefit. We'll see
Wearing an apron while golfing. It’s cool and I’m going to try it on the course. Maybe I become a trailblazer in golf fashion.
It will look goot over your skirt. :)
Would be nice to see Edel vs EQ1 comparison
For a beginner, this is a great option.
For a beginner and the current U.S. Open Champion alike.
interesting video. It would probably help though if the shaft was compared to another shaft (used also in SL irons).
I currrently game Sterlings with Wishon shafts - and I'm seriously thinking of moving to Edel (which uses Paderson). I'm very happy with the Sterlings - but I just want to upgrade to Edel.
Thanks, love it! Learned a lot. May try these shafts and I like the look of the Sterling by Wishon… I think it’s Wishon😊. What was the weight? 270g? 265?
Great review. Was wondering what the cost of those shafts?
Jim. thank you for your assessment of single length irons....as many may have mentioned i wanted to try them without spending 7 to 800.... so i bought orlimar version..5 thru GW.....they work well, once i got used to the ball placement... my 6 iron is my 150 club [ used a lot ] however i can't get the 5 iron to do much more than that and it has a considerable lower ball flight.... [ i think they mention spring face on lower loft clubs but not sure... ] do you think lead tape placed low will give me a netter trajectory and more distance?... i believe all irons are at 37.5" your thoughts would be most appreciated. Respectfully, Vince
It would be interesting if you had the 3 paderson shafts set up as test shafts to put them on the wrong heads and test them again to see if what they were supposed to do was reversed.
I think it would be felt as being different. I suspect spin and maybe some control would change
What do you recommend for one length iron?
Mine has a universal hosel.
I've been told get all parallel shafts then butt&tip trim all of them to 7 iron length.
But companys like Cobra used taper tips shafts for all their one length irons. They only butt trim all shafts to the same length.
After watching this, are we saying that the Paderson single length shaft is doing the work for gapping and ball flight? In other words, could I put these on any head and convert to SL and they will perform like the sterlings?
If I go with single length irons but I play a 3-5 hybrid, should those also be the same? I wouldn’t want to change my gap or PW just my 5-9 irons and possibly my hybrids too…Any advice would be greatly appreciated
I literally just ordered one of the last sets of sterling heads, but didn't order them installed because I couldn't get fit due to Covid. I have never played single length. The builder mentioned considering a Nunchuck iron shaft for those so how lengths. Do you have any thoughts/opinions/experience with those? How would they compare to the padersons you tested here (if you know)? If you can comment about the price point of these shafts that would be good to know too for reference...
Thanks
Did you have to trim these after gluing the head? Or did they come pre cut to match single length?
Jim , I am building a set of Wishon EQ-1 and using Wishon S2S white shaft regular at 75 grams. I have a Problem with the shafts. I cut them to 8 iron length which is trimming them 3 inches because of the weight . Now the problem is I am building them to a regular stiffness but the CPM's range from 295 to 287 , the length is 37 inches. According to my frequency chart a Regular is 310 CPM. I do not see how I can get this up to the CPM's regular plus keep them keep them the same across the build. Any words of wisdom? Love your show been watching it for over 3 years. Moved from Akron 3 years ago to sunny Fl..
The S2S Whites are soft. The chart I use, which came from the now defunct PCS, would show 310 as into the stiff range. 300-305 would be a nice regular in my book. Now, if you cut them another inch, will the gain in frequency be worth the trade off in tip flex? (Stiffer tip than designed.) It might actually help the higher loft clubs. I'd say try the lowest loft with one you've cut, and maybe a wedge too. You might find that you like it in the low loft but not the wedge. If so, pull the wedge shaft and re-use it in another lower lofted iron. Then cut the 8 or 9 through wedges with more tipping. Just my thoughts. I've built and played about 3 sets of SL irons. Varying the tipping can have some impact on how they play and how high or not they hit.
Maybe it's easier to buy some sterling irons and have u install those shafts..
I want these.....!!! How would you chose the correct shaft? Swingspeed?
I have Titleist 710 MBs. My wedges are all the same length as my 9i, and my 4,5 and 6i are all the same length. 7 and 8 are standard. Graphite shafts playing xx-stiff. What are your thoughts on that?
How does one go about getting fit for one length irons? I have a set of cobra one lengths and love them. I would however like to know my swing speed and angle of attack and all that stuff. Problem is nobody has a sterling fitting place near me.
I go through the typical process and discuss with the golfer about the possible lengths and their comfort with the lengths. only has high as a 6 and as a low as an 8
Awesome content Jim. Did you try chipping with that length of wedge? I would love to try that just to see how the difference would feel in a longer chipping club. Question: Any way you game that type of set? Have you seen any combo sets that the wedges are a shorter length and the 9 iron to hybrid are the single length? Cheers.
You get used to chipping with the longer club. You can choke down too. The only shots I found weird were the sand and little flop type shots. Also, I carried a normal 58, which I used for those anyway.
I actually liked the longer length for chipping. Didn't feel like I was crouched over so much and was way more comfortable. The only issue Id say is the lack of wedge options. There is only one bounce and grind so if you need more or less bounce than what is offered you are sort of out of luck.
Ive been asked about them and know other tinkers are trying out. There could be a way to make it happen but the distances would need to be dialed in
wow your swing and your yardages are so similar to mine its scary-except I'm not a lefty :)
nice lil pause at the top as well- thats been the key to my swing as of late.
Could you possible do a 42.5 in driver shaft
Are those particular Padersons a pro-only line? I had not seen them available to the hobbyist market. I guess I should check!
They are on the Paderson website. I think if you call GW they can get in
You can also get them from Edel Golf
What is the length on all these shafts?
a 1/2" over at 37.5
How much can you adjust the loft on a set o Titliest 716 AP1’s.
about 2 degrees
I tried single length but found my game using True Length Technology. Never go back to standard.
Single length irons are the best. 🤘🏻😎🤘🏻
Hi Jim, did you get my message regarding USSN Whale?
I dont think I did
Hi Jim, I sent my message via your feedback response form. How best to message you outside golf format? Regards
I love the channel but as a fitter I'm crying watching you fit/test with range balls indoors? I'd reach out to one of your suppliers who do balls I'm sure they would happily supply some premium balls for your indoor fitting/testing!
I do have some, I use the range balls for fitting to length then break out the others.
Ive dome enough testing with both to get an idea of how the others will perform
Did you really hit a 5 iron 200 yards? Really?
Sorry I thought it was about single irons this is only about shafts.
I think they intend for us to call the EQ1-NX "Equinox"
It means - EQ = Equal Length and NX = Next Generation. The next generation of single length irons, the version after the Sterlings. That is all it means.
Hi Jim, can you confirm what the Grips were please, where they the JumboMax Lite?
They look like Bryson's Grips JumboMax JMX UltraLite Series Giant
@@if829 thanks Ian👍
@@banditbaker1675 Thanks Bandit happy new year , there massive but very light and dont affect swing weight too much , i was given 2 and managed to round with it on a driver , great if you have joint issues, but would take a bit of getting used too, nice to know there are things that will keep us all playing as long as possible , hopefully make the TXG love next monday ;-)
@@if829 and Happy New Year to you Ian, I'm toying with the idea of putting their medium size onto my Irons, to help out with the arthritis in my left hand for next season. I had been trying to find someone locally in the Manchester area that stocked them, but drew a blank so will probably have to order them direct from Jumbomax.
Yep I should be there on Monday, it's not as if I have anything else to do now that we are back in our 3rd Lockdown
Take care & stay safe👍
just they were and they felt pretty good.