ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2023
- VALVE COVER GASKET AND SPARK PLUG/TUNE UP
CHEVROLET CRUZE CHEVY SONIC 1.8 VALVE
COVER OIL LEAK FIX
#mechanic #automotive #chevycruze #chevysonic #howto #diy #autorepair
In this video we will show you how to remove valve cover or replace the valve cover gasket and change plugs on a 2014 Chevy Sonic or Chevrolet Cruze also known as Holden Cruze and Daewoo Lacetti. This video covers the 1.8L four cylinder motor engine. If you have oil leak from the valve cover or the valve cover gasket this video will help you fix that. We showed you how to remove valve cover or replace the valve cover gasket also known as rocker cover or cam cover.
this video should be helpful on:
2008 Chevrolet Cruze Valve Cover Gasket Replacement Removal
2009 Chevrolet Cruze Valve Cover Gasket Replacement Removal
2010 Chevrolet Cruze Valve Cover Gasket Replacement Removal
2011 Chevrolet Cruze Valve Cover Gasket Replacement Removal
2012 Chevrolet Cruze Valve Cover Gasket Replacement Removal
2013 Chevrolet Cruze Valve Cover Gasket Replacement Removal
2014 Chevrolet Cruze Valve Cover gasket replacement removal
2015 Chevrolet Cruze Valve Cover Gasket Replacement Removal
2016 Chevrolet Cruze Valve Cover Gasket Replacement Removal
2012 Chevrolet Sonic (Holden Barina) Valve Cover Gasket Replacement Removal
2013 Chevrolet Sonic (Holden Barina) Valve Cover Gasket Replacement Removal
2014 Chevrolet Sonic (Holden Barina) Valve Cover Gasket Replacement Removal
2015 Chevrolet Sonic (Holden Barina) Valve Cover Gasket Replacement Removal
2016 Chevrolet Sonic (Holden Barina) Valve Cover Gasket Replacement Removal
2017 Chevrolet Sonic (Holden Barina) Valve Cover Gasket Replacement Removal
2018 Chevrolet Sonic (Holden Barina) Valve Cover Gasket Replacement Removal
2019 Chevrolet Sonic (Holden Barina) Valve Cover Gasket Replacement Removal
Valve Cover Gasket amzn.to/3BB1V6l
Valve cover with gasket amzn.to/3MC0QS4
My Amazon store for featured tools & products: www.amazon.com/shop/carlsgarage
My website for merch/tools/products/contact/socials: app.thecreatorstash.com/carls...
Torque specifications and socket sizes provided on lots of our how to tutorial and step by step videos.
Disclaimer:
Due to factors beyond the control of FerKurl, I cannot guarantee against improper use or unauthorized modifications of this information. FerKurl assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FerKurl recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FerKurl, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FerKurl.
As an Amazon Associate I earn from qualifying purchases. - ยานยนต์และพาหนะ
![BOWKYLION - เจ้านายคะ (work-life imbalance) [Official MV]](http://i.ytimg.com/vi/6bFj8G2pOi4/mqdefault.jpg)
wow,thank you so much,so nice to see people who care and share,god bless you
Do you use gasket sealer when you put the new valve cover gasket on
2:07 Turned into Rick Sanchez there for a second.
If you live up North, you should know that on the left side of the valve cover, there are 3 torx bolts that run parallel to the timing chain cover that are a bit higher and shorter. Just below them, in the front and in the back corners on the left side -- those torx bolts look like all the rest but they are not. On those two, the bolt runs through an inch long metal cylinder that is fixed to the cover that slides down into a metal tube on the engine block. The bolts thread into the engine block at the bottom of that tube. On my sonic those cylinders were rusted and the front one was very stuck. I had to wrestle, twist and hammer my cover to get it off. And use a lot of pb blaster. None of the videos I found identified this problem. Know that this is yet another job that on the video looks easy but up north where things rust, will be a bear.
Great vid!
That was not a great video, nothing was actually shown. It was all done off camera.
Appreciate the comment! ❤️
Did you use brake cleaner or something to get the old gasket off the metal surface?
What code was coming up? I believe I am going to need to do this on my 2016 Sonic.
Great video!
Oddly enough, mine didn't throw a code. Even if it did I couldn't check cause the terminal to check a code isn't installed? Only way I knew was just changing my plugs cause of skipping going on due to the oil fill in the wells.
So I don't get ripped off, How will I know if spark plugs need to be replaced?
Can a blown valve cover gasket cause oil to spray everywhere when driving?
yes
You skipped over the part where you unclip the wires from the side and back. That’s what I’m stuck trying to figure out how to unclip them
Me too
@@carlos.75there's other videos on TH-cam, you should just pull straight up and they come out, take your time and don't force it
Pointless video