2 years ago I set my detector up like this from your video. Ive used nothing else since and found a lot of deep relics at trashy colonial house sites. Not sure why people are skeptical about this. It works!! Buying a Deus II soon but Im not selling the Nox.
Great instructional video. Very easy to follow as you went slow enough and showed the steps. Just programmed this in and saved it and hope to test it on one of my old colonial spots today. Thanks again!
What people need to realise is there is no number one great setting , it’s different for everyone around the world , the basics will be the same but you will need to fine tune to your own specific location . The noise cancelling to number 4 again is location specific and auto cancel should be carried out about every 30 minutes, not set to a specific number . Thanks for taking the time to make the video though 🙏
Awesome, thanks for the video. I have never seen anyone specifically select a noise cancel number before. Do you know how the noise cancel numbers correlate to depth, stability etc? Etrac users often used 11 for silver.
Never seen someone Manuel noise cancel? Pretty sure setting it at 4 instead of running it doesn't give you a advantage. I will try it out tomorrow on both mine and my mrs
Bakerzinc - These settings come from the files of an Equinox 800 Facebook group of which Neil is a member. (As is Joan Allen and a few other well known British accounts). The performance of the Equinox using these settings is impressive.
Nice to hear joan allen from our overseas neighbours 👍🏻 been on there digs and started doing charity work with them but covids stop play. Be interesting to see what this does tomorrow on my permission
I still use this program when I am looking for small objects like earrings or necklaces. I don’t use it at the beach because the areas I detect have a lot of canslaw and even a tiny bit of aluminum sounds pretty good with the B4L settings.
@@RecoveryAddict ok thanks i use park 1 i did try this setting from you abit im still working out what settings to use the most i do pasture grass mainly how long does the machine do you ever let it go to low i.e the flash and then charge it up or just charge it every time you use it even if it is not ? also what charge times do you get to as other day took awhile to charge but it was low low battery so maybe thats why took over 4 hours ?
@@swiftdetecting I like to charge my detector the night before I go detecting. I don’t run it all the way dead before charging. I like to fully charge the battery before I head out because I tend to go on longer hunts. I do have a large usb battery pack that I can charge it on if I ever run low while on a hunt.
@@RecoveryAddict thanks i do 6 or 7 hours am i right in thinking it is 12 hours max? as i know the XP Deus is 21 hours depending on which hz you use i like both machines for different reasons
Whats the hidden setting in beach mode that field mode doesn't have? My field 1 settings are exactly the same as these beach mode settings. So why would I choose beach over field when in a field? I can only assume there is a hidden setting in beach mode?
Same here I really don't understand why this is so great over the default settings, and nobody has explained or proved why this setting is supposedly better than the land settings.
@@highplainsdrifter842 you walk over the same target in the same manner using the exact same settings except the only difference being beach 1 and field 1. I really can't see there being much difference. If you dont walk over it, you'll never find it
Zach, I haven’t tried it but you should be able to input most of the setting in the 600. You may not be able to set iron tone volume... I think that is just an 800 option but I may be wrong. www.minelab.com/community/treasure-talk/equinox-600-vs-equinox-800
@@RecoveryAddict You can adjust the iron tone volume on the 600. I have mine set at full volume, as I'm searching for both ferrous and non-ferrous relics.
Can you do a park 1 setting for me and others I got so many parks here where I live and would like you to give some advice on setting it up in Park mode 1 how you run it in that mode would be helpful
Thank you for the simple tutorial. I just bought a Nox 800. Brand spanking new. Will hunt with it for the first time on Saturday with these settings.
2 years ago I set my detector up like this from your video. Ive used nothing else since and found a lot of deep relics at trashy colonial house sites. Not sure why people are skeptical about this. It works!! Buying a Deus II soon but Im not selling the Nox.
Very cool I just bought an 800 yesterday, So when it arrives I will be watching this vid again, and again, and.... Well done thanks
Thanks! These settings have worked well for me. The Nox is a versatile machine that will reward you if you learn it! Happy hunting!
Great instructional video. Very easy to follow as you went slow enough and showed the steps. Just programmed this in and saved it and hope to test it on one of my old colonial spots today. Thanks again!
Thank you for this, I used it yesterday at the beach, found coins and a key and what looks to be a silver earring. I was using the F2 setting.
Sam, Great finds! Keep it swinging!
new sub! nice to meet ya keep you the good work! you got a new digging friend!
What people need to realise is there is no number one great setting , it’s different for everyone around the world , the basics will be the same but you will need to fine tune to your own specific location . The noise cancelling to number 4 again is location specific and auto cancel should be carried out about every 30 minutes, not set to a specific number . Thanks for taking the time to make the video though 🙏
Great Job on this! I'm Experimenting with these settings myself..GREAT job :)
Hey pal..I just left dues for the 800. This is an excellent video. Thanks
Just subbed ya
Scuba Gold - Thank you! Happy Hunting!
Will try these out next Sunday on a dig
Awesome video....very clear and to the point.
Thanks!!!
Great helpful video. Next one, if you drop sensitivity to 1 instead of volume, metal targets in the floor wont interrupt what your doing in the video.
Nice ty for the info l need to try this on my next adventure
Happy hunting and gl
I’m a subscriber now 😯 look what I found
Ok I found your answer further down the list 👍
Awesome, thanks for the video. I have never seen anyone specifically select a noise cancel number before. Do you know how the noise cancel numbers correlate to depth, stability etc? Etrac users often used 11 for silver.
kylefreemason I’m still learning some of these correlations myself. I haven’t used the Etrac yet.
Never seen someone Manuel noise cancel? Pretty sure setting it at 4 instead of running it doesn't give you a advantage. I will try it out tomorrow on both mine and my mrs
1. That's not how you noise cancel and 2. You can't copy someone else's settings as they will be unique to your situation.
Setting a noise cancel of 4 is nonsense, should be set depending of the environment you are detecting, same with the ground balance
Thank you for sharing.
echt aanrader Beach for Land Settings
How good are these settings when using them the beach?
Can this be done with the 900 also
Neil, where can I find beach to land settings for Equinox 600? Would a Coltec 10 x 5 coil improve my success?
Hi Scott excellent video. Can I ask do you still have to dig the really love below five numbers on land.?
mojo1737, If I get a good solid number (comes up the same from several angles) I’ll dig it. Generally you have scrap iron under 5 though.
What about F2 ???
Will this work for the 600
Hi , can this be used on the 600
Hey. I was wondering if you have cleared these settings with Neil? I see there are quite a few different versions of these settings around the WWW.
Bakerzinc - These settings come from the files of an Equinox 800 Facebook group of which Neil is a member. (As is Joan Allen and a few other well known British accounts). The performance of the Equinox using these settings is impressive.
Nice to hear joan allen from our overseas neighbours 👍🏻 been on there digs and started doing charity work with them but covids stop play. Be interesting to see what this does tomorrow on my permission
Why did you put noise cancel to 4 I don't understand this cheers
I followed Neil Jones on these settings. Feel free to tweak them as you see fit and let me know how it works for you!
Do you still use this and what targets do you look for with it thanks
I still use this program when I am looking for small objects like earrings or necklaces. I don’t use it at the beach because the areas I detect have a lot of canslaw and even a tiny bit of aluminum sounds pretty good with the B4L settings.
@@RecoveryAddict ok thanks i use park 1 i did try this setting from you abit
im still working out what settings to use the most
i do pasture grass mainly
how long does the machine do you ever let it go to low i.e the flash and then charge it up or just charge it every time you use it even if it is not ?
also what charge times do you get to as other day took awhile to charge but it was low low battery so maybe thats why took over 4 hours ?
@@swiftdetecting I like to charge my detector the night before I go detecting. I don’t run it all the way dead before charging. I like to fully charge the battery before I head out because I tend to go on longer hunts. I do have a large usb battery pack that I can charge it on if I ever run low while on a hunt.
@@RecoveryAddict thanks i do 6 or 7 hours am i right in thinking it is 12 hours max?
as i know the XP Deus is 21 hours depending on which hz you use
i like both machines for different reasons
@@swiftdetecting The Nox 800 on a full charge has always lasted me all day at least. I do get longer battery life on my XP ORX.
Whats the hidden setting in beach mode that field mode doesn't have? My field 1 settings are exactly the same as these beach mode settings. So why would I choose beach over field when in a field?
I can only assume there is a hidden setting in beach mode?
Same here I really don't understand why this is so great over the default settings, and nobody has explained or proved why this setting is supposedly better than the land settings.
@@highplainsdrifter842 you walk over the same target in the same manner using the exact same settings except the only difference being beach 1 and field 1. I really can't see there being much difference. If you dont walk over it, you'll never find it
Can you use this setting on land and beach, thank you
With the new F2 setting, is performance the same? Nice vid.
CZKidd I’m still researching the F2 changes. I may have a video up soon about it.
Hey does this setting work with the nox 600 aswell thanks in advance
Zach, I haven’t tried it but you should be able to input most of the setting in the 600. You may not be able to set iron tone volume... I think that is just an 800 option but I may be wrong. www.minelab.com/community/treasure-talk/equinox-600-vs-equinox-800
@@RecoveryAddict You can adjust the iron tone volume on the 600. I have mine set at full volume, as I'm searching for both ferrous and non-ferrous relics.
How many different programs can be stored in the user friendly?
Just the one unfortunately.
what is the PT setting for please ????
Have you found any gold with Neil's set up ??
Yeah I like this
Why do manual noise cancel?
Can you do a park 1 setting for me and others I got so many parks here where I live and would like you to give some advice on setting it up in Park mode 1 how you run it in that mode would be helpful
Can I use 2 or5 tones instead of50 tones on this program. Thanks.
John, You can use five tones. Let me know how you do!
Will do.
Will this work on the beach
I actually prefer the stock beach settings on the Atlantic Coast beaches I hunt.
Can someone tag me or direct me where I can find the 600 settings please
What about t3-t5 on target?
wish I had a Nox to try this out on
Mark - I hope you find a nice fat chunk of gold to fund your equinox purchase.
Oehyeah great settings since i found celtic, saxon gold, saxon silver, middeavel silver and gold follow me on dutch roman digger @ facebook