@@waldo2413 appreciate it. Be a few weeks. Cob led UV is coming from China. Also what type of glass would u recommend. Been looking around. Starlight glass.....but wow $$$$ on that.
@@Dtag1971 starlight is the best but its not cheap what i would do is go to ur local glass shop and tell them you need low lead glass your screen printing they can get you glass that works that dont brake the bank just tell them u dont want uv blocker u need the uv to go though glass
Think I could get similar results with the led black lights. I’d rather keep the size like an old light box. So I’m able to build it into a desk or work station. Worried it’ll be too close
@@markgomez1387 I think u will be happy with the results and it's not to hard to do if u have any questions or need help let me know and I will do my best
@@waldo2413 yeah I was thinking the same, should I decrease the distance to like 18-20. Also I was thinking of doing it kind of like a table top closed off
@@ballerpro03 I would keep it at that distance cause the light if u get it to close won't reach the edges of the frame with the same power if u get it to close
Wow. 6 seconds?? Impressive. I need to improve. I take 6 minutes to expose mine with a 30w led light. Even with the sun, it takes like 30 seconds. But I need to get to at least a few seconds to work faster.
@@enzprintco.8625 i have my timer set for 6 on solids and 7 for halftones there is about a sec and a half delay but u can tell the difference if u try to halftones with 6 secs its not as good u need that extra sec but yeah its fast but i use vpr also so it works good with it you just have to test with the emulsion you are using
waldo2413 you get decent 1/2 tones with a photopolymer? I was told you need diazo emulsion for that kind of detail. But then again, it’s probably my doodie multi bulb unit undercutting...
@@enzprintco.8625 there right but u can get good halftones with photopolymer diazo is more forgiving and works good with lights like u have shot me a email and ill give u some more info and talk about getting u stuff sent out waldo2413@gmail.com
Hello mate....Im asking the question before Ive even looked myself lol...but what is VPR emulsion....and is it available in the UK ...or is there a similar emulsion......obviously you are in the states but I just calling on your knowledge ya know.....thank you
Just ordered tall the parts to make this type of exposure unit. Have you ever exposed a 23 x 31 screen?
yeah ill try do make a video on it next week
@@waldo2413 appreciate it. Be a few weeks. Cob led UV is coming from China. Also what type of glass would u recommend. Been looking around. Starlight glass.....but wow $$$$ on that.
@@Dtag1971 starlight is the best but its not cheap what i would do is go to ur local glass shop and tell them you need low lead glass your screen printing they can get you glass that works that dont brake the bank just tell them u dont want uv blocker u need the uv to go though glass
Do you know how many mw / cm2 from the source to the glass? Or how many mw / cm2 does this 100W LED have?
Think I could get similar results with the led black lights. I’d rather keep the size like an old light box. So I’m able to build it into a desk or work station. Worried it’ll be too close
Do you have a video on how you made this?
yeah I have a video on it its posted one or 2 videos after that video
What is the distance from the glass to the actual LED light
20 to 24 inches
@@waldo2413 thanks I'm thinking of redoing my Riley
@@markgomez1387 I think u will be happy with the results and it's not to hard to do if u have any questions or need help let me know and I will do my best
@@markgomez1387 I have a list of things u will need in the description that's what I used to make it
PLEASE, could you tell me the exact distance between glass and light?
i emailed you more info if u need more email me and ill help u all i can
100w led which colour ??
it's a uv led
What emulsion?
vpr
What's the distance from your light source ?
I said it in the one video where I go step by by I cany remember its 20 or 24 inches one of them either would work hope that helps
waldo2413 would it be around the same for a 60w ?
@@ballerpro03 yeah cause u want the light to spread out but your time will be longer then mine was cause mine was 100w
@@waldo2413 yeah I was thinking the same, should I decrease the distance to like 18-20. Also I was thinking of doing it kind of like a table top closed off
@@ballerpro03 I would keep it at that distance cause the light if u get it to close won't reach the edges of the frame with the same power if u get it to close
Wow. 6 seconds?? Impressive. I need to improve. I take 6 minutes to expose mine with a 30w led light. Even with the sun, it takes like 30 seconds. But I need to get to at least a few seconds to work faster.
i see u got the power hooked up its looking good keep up the good work love watching ur videos
@@waldo2413 Thanks, and I do, finally I can work without worrying about heating up the cables.
That's awesome work mate 👌.. could you tell me what timer relay you use.. it's on the dc side right? Thanks!
yeah I have another video of the parts and wiring of it and where i got the parts
Man that light was only on for like 4.5 seconds...crazy!
I think I had it on 6 second and there is a delay from when it powers on but yeah it burns them fast we do half tones at 7 seconds
waldo2413 - 7 seconds with the delay (so 5.5) or actually 7 seconds? If I can burn screens at 7 seconds...I don’t even need the timer lol
@@enzprintco.8625 i have my timer set for 6 on solids and 7 for halftones there is about a sec and a half delay but u can tell the difference if u try to halftones with 6 secs its not as good u need that extra sec but yeah its fast but i use vpr also so it works good with it you just have to test with the emulsion you are using
waldo2413 you get decent 1/2 tones with a photopolymer? I was told you need diazo emulsion for that kind of detail. But then again, it’s probably my doodie multi bulb unit undercutting...
@@enzprintco.8625 there right but u can get good halftones with photopolymer diazo is more forgiving and works good with lights like u have shot me a email and ill give u some more info and talk about getting u stuff sent out waldo2413@gmail.com
Awesome job 👍
@Marley Castiel whaaaa
Hello mate....Im asking the question before Ive even looked myself lol...but what is VPR emulsion....and is it available in the UK ...or is there a similar emulsion......obviously you are in the states but I just calling on your knowledge ya know.....thank you
Well lol the answer is yes I can get it in the UK....Its about £60 ish ....does that sound about right ?
www.spe-online.co.uk/emulsions/
hope that helps let me know if that link worked
@@waldo2413 Thank you...yes the link worked fine...its now 4 in the morning here so I'll have a proper look tomorrow....thanks again
All I can say is " wow" !!!
6 sec.on a LED 100w 😱😱😱..
thanks
wow 6 seconds thats fast
yeah I use 6 seconds for most frames 7 on others
Nice