ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
ฝัง
- เผยแพร่เมื่อ 16 ก.พ. 2022
- IWDC6105
Donate: paypal.me/bootsowen
Support: / bootsowen
www.amazon.co....
You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program and I may receive a commission for the sale. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.
Owen, Washer dryers, all part of a consumerist life style, for people who are too busy being self important to care, cheers
Normal sound for a Indesit they are good machines we had one from 2004 till November 2011 great machine just a washing machine and grandma had her washing machine from December 2007 till November 2019 amazing machine they don't do 1000 spin on the sports program regardless if you have the dial at 1000
Mine was from 2020 and still working perfectly fine
Model is Indesit IWC 71452
Manufactured 05/09/2013
Newer then my mums zanussi
Hey Owen.
Well firstly these Indesits ran forever and alot of them around. There cheap made but parts not to expensive etc.
The washer dryers are always poor like Hotpoints.
This one seems dryer working well, good bearings and motor sounds :)
its been maintained by the looks. rust always happens sadly. just tacky paint work.
Drums would always fail and be replaced. SO i think its happen an drum replacement.
Door seals you probs find on ebay super cheap!
The pump looks to be leaking. its either not attached properly, they always failed mostly
I had the IWE8121 washer, ran for 10 years
there much better then the later indesits for sure
Hello! Is there a condenser unit and if yes, is it accessible to clean?
Mine doesnt want to start.... the lights works fine but when you press start stays there doing nothing. WHat could it be? i try to reset and doesnt work eighter
I have always found these things to be tricky. You could check the motor. But how to check it. Sometimes water comes in first. Could that be the problem. If you turn it on and wait does it make an error message?
no.. no error mesages.. i opened check if some cable or bearing was loose .. but its wierd all looks fine.. even the filter.. no idea why doesnt want to start the cicle. @@bootsowen
These get extremely hot inside drum during drying!😉 Maaaybe some exciting experiments?😁
Good idea! like what?
@@bootsowen Something flameable on cottons drying cycle?😅
Rust is typical on indesit, they use the worst quality paint ever
Says the one with a piece of scrap metal
Indesit ain’t up to much
It’s 9 years old I ain’t surprised it’s got rust! It’s not gonna stay like brand new forever and these were probably only £250/299 brand new from Argos or something back then!
They are only a budget machine. Don't expect the same as with a Bosch or Miele
And my Bosch is also absolutely covered in rust
Maybe you could glue the tear in the rubber back together as it would seem like a waste of a machine if it was chucked out because of a small leak.
I will probably recycle the good parts and destroy the remainder with a brick. Where I live people don't like to buy used machines that have even a little bit of rust!
@@bootsowen those machines weren't around in 2008
@@bootsowen yes it would be 2013 as indesit changed design in about 2010 to that design
What I think is weird about indesit is they use metal pulley wheel on their washer dryers but they use plastic pulley on their regular washers
Yeah. It never makes sense that some parts are quality and some aren’t.
spore intensive' s wash temp is 30 even if you set it to 40
I'd say you could easily fix it with some waterproof silicone around the pump seal and the door boot but since it's rusty and ugly and no one wants it I'm assuming that you are just going to destroy it anyways which is fine I don't care it is what it is
Like you say, you could easily fix it, I am not sure that a washer dryer would make a good video smash. I reckon I could just bring them all to the scrap yard for a few ££.
@@bootsowenHow about a trip to the scrap yard is recording allowed there !?
They’re not keen on it. I have seen them tell others to stop taking photos. I guess they don’t realise that everyone has a dashcam.
I would put glue on that and it'll be fine
Probably won’t. Nobody round here wants a machine like that and I don’t want to be the guy who glued an taped something together and sold or gave it to someone else. To get cursed when it breaks.
They are a bad machine from bearing constantly going on the drum and modules blowing up, chassis are rubbish they are a rust bucket they rust along under the dispenser they are called indishit for a reason I'd just change the filter and see how it goes
And where are you from, I'm from Roscommon living in Essex door seals are about 60£ here not sure how much at home and the pump will be the same as there is only 3 or 4 pumps used be on all of there machines
You don't know nothing about washing machines get lost
I probably won’t fix it. I’m up in the north of England.
Buddy, be civil
@@indesitlghotpointwashingma8305 I used to be an engineer for Indesit for years so wind your neck back in
Indesits are nightmare 🙃
Yet it’s like 9 years old, good for a budget washer if you ask me.
Not necessarily, these are great
My candy is even more of a nightmare