Great info Toby. I also use many templates with features already started, e.g. boss extrudes of a particular size with tapped holes already in place. Saves so much time and repetition.
Toby, Great clip. Can I suggest you do one on setting up drawings with Titleboxes and getting the values from the part drawings, then assemblys as a seperate video with combined weights etc. I have done it a couple of times, but because you do it rarely, you have to re-learn it again... Which can be alot of trial and error and time consuming. Having a step by step like this would be ideal as a reference. Thanks Again!
Hi - Tolerance is used by the inspection team to determine whether the manufactured parts are usable or not. If a part is measured by the inspection team, and it falls outside of the specified tolerance, the part fails inspection.
Great info Toby. I also use many templates with features already started, e.g. boss extrudes of a particular size with tapped holes already in place. Saves so much time and repetition.
Thanks Barry!
Toby, Great clip. Can I suggest you do one on setting up drawings with Titleboxes and getting the values from the part drawings, then assemblys as a seperate video with combined weights etc. I have done it a couple of times, but because you do it rarely, you have to re-learn it again... Which can be alot of trial and error and time consuming. Having a step by step like this would be ideal as a reference. Thanks Again!
Awesome its new thing for me 👍👌 thanks
Awesome - glad this helps!
How add custom properties
FILE>PROPERTIES
Add it in the template
Hi. Excuse me and how is the tolerance configured? For example, +- 0.002 lbs.
Hi - Tolerance is used by the inspection team to determine whether the manufactured parts are usable or not. If a part is measured by the inspection team, and it falls outside of the specified tolerance, the part fails inspection.
Sir please clear the 3d experience
Hi Sunny - not sure what you mean - could you please rephrase?
Start from basice
Make tutorial of 3d experience sir
@@sunnyagro3275 I cannot do that - sorry. I don't think 3DExperience is the correct solution for most of my users/students.
Ok sir thank you