Super cool build. I was waiting for someone to make an 04 65mm whoop soon. I've got a few tips that might make this thing fly a bit better and actually a viable thing to fly regularly. You could use the new betafpv board with a built in bec to save a ton of weight, a meteor 65 air frame to save a bit more and they're pretty much just as durable as the happymodel one your using. I also use that frame but for a heavy build like this i'd switch over. You can still get a pretty good tune on a 8bit esc by using blujay so I wouldn't be concerned about using a board with am32. Some higher kv motors might be nice but not necessary. But one thing you should definitely do to not break your o4 is put a tiny piece of foam underneath the camera in between the board. Those 3d printed mounts are nice but a lot of people including myself have broken vtxs frome those bending in a crash.
thank you man, the screws are M1.4, self tappers, 12mm length. I think I originally got them in the Walksnail 1s lite kit as they are longer for whoops with digital vtxs.
Flight time is tricky. I think I can get up to 2 mins with triblades and the 25K motors. Throttle is crap though at 80% hover. This was just a proof of concept really. 30Kv motors would improve flight performance and reduce throttle hover but will kill flight time.
Super cool build. I was waiting for someone to make an 04 65mm whoop soon. I've got a few tips that might make this thing fly a bit better and actually a viable thing to fly regularly. You could use the new betafpv board with a built in bec to save a ton of weight, a meteor 65 air frame to save a bit more and they're pretty much just as durable as the happymodel one your using. I also use that frame but for a heavy build like this i'd switch over. You can still get a pretty good tune on a 8bit esc by using blujay so I wouldn't be concerned about using a board with am32. Some higher kv motors might be nice but not necessary. But one thing you should definitely do to not break your o4 is put a tiny piece of foam underneath the camera in between the board. Those 3d printed mounts are nice but a lot of people including myself have broken vtxs frome those bending in a crash.
Which exact exact board are you referring to? If I am not mistaken about the weight difference between those boards is 0.1g The BEC is 0.4g ...
good stuff 🚀🕶
Great video bro Just found the channel and subbed.
your graden has a lot of greens now brother
Thank you man, the Mrs is a horticulturalist, and it shows!
Nice.
great video. What size are the screws you used on the stack?
thank you man, the screws are M1.4, self tappers, 12mm length. I think I originally got them in the Walksnail 1s lite kit as they are longer for whoops with digital vtxs.
Do you think it would give more flight time with 30kv motors?
Flight time is tricky. I think I can get up to 2 mins with triblades and the 25K motors. Throttle is crap though at 80% hover. This was just a proof of concept really. 30Kv motors would improve flight performance and reduce throttle hover but will kill flight time.
The higher kv would just reduce flight time
@LoganimFPV Okay Thanks
@@stuffbymatt583 Your thing would be to find the balance so that the flight time does not die and that the gas is at 50% in hover.
thx for vid mate
you're welcome mate, it's a bit rough and ready but I just wanted to quickly share that 1S is easy on this vtx with the right BEC.
Nice flight they need some with different cam angles
Trying to work out where you are in Australia from the scenes shared ??
Melbourne mate. South east. :)
Wazzzzz up Matt 😁