I made a light-up landing pad on a cyberpunk building | Cyberstreets Diorama Building #2

แชร์
ฝัง
  • เผยแพร่เมื่อ 19 มิ.ย. 2024
  • Building #2 of the cyber streets diorama. More to come!
    Qidi Tech X-Plus 3 printer (affiliate): qidi3d.com/products/qidi-x-pl...
    Check out my Patreon if you want to help support the channel:
    / bpcustomcreations
    Buy me a ko-fi:
    ko-fi.com/bpcustomcreations
    You can also support the channel through paypal:
    www.paypal.me/BPCustomCreations
    Useful tools and materials:
    Plastic P-cutter knife amzn.to/3SXCu7w
    Pin vise amzn.to/3kSMPBN
    Assortment of styrene amzn.to/3usCyPJ
    My favorite plastic cement amzn.to/3IlPFaR
    Paint stripper (citrus-based) amzn.to/39QKgtG
    My favorite primer amzn.to/2Y5Oyeu
    Add some crusty texture amzn.to/3oiEgSM
    Vallejo black wash amzn.to/39NdeL1
    Using these Amazon affiliate links helps support the channel at no extra cost to you.
    #cyberpunk #diorama #craft

ความคิดเห็น • 84

  • @ConjuredCraft
    @ConjuredCraft 3 หลายเดือนก่อน +1

    That landing pad came out so fresh, amazing work.

  • @pacificcoastminiatures
    @pacificcoastminiatures 3 หลายเดือนก่อน +1

    Looks awesome! Like that you not only 3d printed actual parts but also a jig to solder together the LEDs. A 3d printer is so valuable to have as a modeller. 😊

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน +1

      It really is! It's one of my favorite tools to have for any task.

  • @Atbel
    @Atbel 3 หลายเดือนก่อน +1

    Screaming acrylic sounds like a pretty dope band name haha! This build turned out awesome!🙌

  • @chasonlapointe
    @chasonlapointe 2 หลายเดือนก่อน

    Fantastic build, you'd make a killer terrain maker for tabletop miniatures!

    • @BPCustomCreations
      @BPCustomCreations  2 หลายเดือนก่อน +1

      Thank you! I am pretty close to that youtube niche but I don't play any games so I use the same skills to just make diorama

  • @bradcraig6676
    @bradcraig6676 3 หลายเดือนก่อน

    That landing pad is fire!

  • @jchayes7325
    @jchayes7325 3 หลายเดือนก่อน

    Another great build is always my friend I really enjoy your channel my friend and keep up the good work and God bless my friend

  • @TheThunderinghammer
    @TheThunderinghammer 3 หลายเดือนก่อน

    That lighting effect is so awesome, I am amazed this is the first time i've seen it

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน +1

      Thanks! I'm sure it's been done before though I haven't seen it personally either 🤔🤔🤔

  • @kadenjay6207
    @kadenjay6207 25 วันที่ผ่านมา

    Your videos are amazing inspiration for my own venture into the world of Cyberpunk Combat Zone terrain building

  • @lesimages3dclic
    @lesimages3dclic 3 หลายเดือนก่อน +4

    Okay, I have to confess, that is my favorite ever, it brings me back to my childhood when I dreamed of having such a cool toy to imagine science fiction stories!

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      Thanks! I'm glad you enjoyed it so much

  • @cerisekappes580
    @cerisekappes580 3 หลายเดือนก่อน

    Awesome awesome addition to the diorama!!! The detailing and lighting really pull the building together ❤😊❤

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      Thanks! I need to plan for the rest of the structures now

  • @lofiworkshop
    @lofiworkshop 3 หลายเดือนก่อน

    Another beautiful building for your cyberpunk city. I love that landing pad, absolute genius. Excellent work!

  • @geoffersongeofferies477
    @geoffersongeofferies477 3 หลายเดือนก่อน

    As always, great stuff Ben. I’m sticking around for the whole series.

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      Awesome! This landing pad needs a vehicle 🤔

  • @ScaleModelGeek
    @ScaleModelGeek 3 หลายเดือนก่อน

    Great build. Came up well and I love the lit landing pad. It's given me an idea.

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน +1

      Awesome! I'm glad I could pass on some inspiration

  • @emilnord
    @emilnord 3 หลายเดือนก่อน

    Looks so good. Really love the lights on the landing pad. Really awesome part of this diorama. For the next one, we need a building with some flicking lights. Great work on this one.

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน +1

      True! I'm planning on adding more lights in the final steps when all the structures are in place 👍👍

  • @oisinholz
    @oisinholz 3 หลายเดือนก่อน

    Very cool idea! Love seeing unique things like this!

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      Thank you! Almost all of what I've made on the channel is original ideas

  • @garybuettner7920
    @garybuettner7920 หลายเดือนก่อน

    Very cool. This and the flying car made me subscribe.

    • @BPCustomCreations
      @BPCustomCreations  หลายเดือนก่อน +1

      Thanks! Glad to have you here 👍

  • @JeremyD986
    @JeremyD986 3 หลายเดือนก่อน +3

    As a custom model maker myself, I am envious of your skills and creativity! Awesome work, amazing talent, incredible creativity!

  • @CCMinis
    @CCMinis 3 หลายเดือนก่อน

    So so so dope!

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      Thanks Nick! It needs a vehicle next

  • @KensToyz
    @KensToyz 3 หลายเดือนก่อน

    Excellent work!
    Videos like this inspire and teach. Thank you for sharing your work.

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      Thank you for the kind comment 😊

  • @Matt-md5yt
    @Matt-md5yt 3 หลายเดือนก่อน

    this is awesome

  • @Slurgical_3D_Terrain_Channel
    @Slurgical_3D_Terrain_Channel 3 หลายเดือนก่อน

    Looks amazing! Instant fan.

  • @proto.roborovski
    @proto.roborovski 3 หลายเดือนก่อน

    Love your builds, keep em coming!

  • @PKTCrafts
    @PKTCrafts 3 หลายเดือนก่อน

    Awesome stuff man! That landing pad looks so cool!

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน +1

      Cheers! I'm glad I kept the building low for this

  • @marklindsey4112
    @marklindsey4112 3 หลายเดือนก่อน +1

    Love the manual scoring on the landing pad. It's inspiring to see a smart, low tech, hand done solution to something that would usually be made using a laser cutter. I am thoroughly enjoying this cyberpunk series. Can't wait to see what's coming next.

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน +1

      I like figuring out problems! Dont get me wrong though, I'd use a laser if I had one 😅

  • @jacobroberts1434
    @jacobroberts1434 3 หลายเดือนก่อน

    So awesome!!

  • @diyfireking
    @diyfireking 3 หลายเดือนก่อน

    Nice work dude 🧡🧡

  • @yayasgaragecustomdiecast7198
    @yayasgaragecustomdiecast7198 3 หลายเดือนก่อน

    Very cool!

  • @daneself858
    @daneself858 3 หลายเดือนก่อน

    😲🔥🔥 awesome

  • @bazzatron9482
    @bazzatron9482 3 หลายเดือนก่อน

    Hey BP! On your LEDs, the resistor isnt just about dropping voltage, but limiting current.
    This kind of resistor arenagement is called "ballast" - and its basically the electrical equivalent of sandbags on a hot air balloon, it prevents the LED from soaring too fast in the circuit.
    The resistor value for your circuit is ~0 ohms because your power source is technically insufficient to drive those LEDs, so given alkaline batteries youre _probably_ fine - but performance will probably be sub-optimal (in this case, probably meaningless - just a technical distinction).
    To improve the performance of this circuit, you need to find the "voltage drop" or "forward voltage" for the LEDs and use at least that many volts (taking into account that voltage in batteries decreases as they lose charge) these white leds are like 3.2-3.4V, higher than the 3V input. This means the LEDs will be sucking on those batteries like a toddler on a near empty juice box, which if you were using lithium batteries could have spicy results.
    Adding a third AA battery would give you enough voltage, but you'd need a 68ohm (or thereabouts, mathematical optimum is 68ohm for a perfect 4.5V input) resistor for EACH LED.
    I thought it was worth mentioning - as your voiceover seemed to indicate an incomplete understanding of the reason for not using resistors, which I appreciate may have been for brevity - analogue electronics being as dry a topic as it is.
    Anyway, on the build. I cannot believe how freaking tidy your etched plexi looked. I'd never have even attempted that without a laser. Mega kudos. The edge illumination is genius, and your use of those train parts is going straight in my toolbox for later use.
    Great build, truly. It's all coming along wonderfully!

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      Awesome comment and thanks for the detailed info! You're half right about my rationale. I know current could have been handled properly with resistors and I also figured I didn't care for this application with such low use and low stakes. The thing I don't have is the patience or proper parts to make the perfect circuit 😅

  • @parti5t
    @parti5t 3 หลายเดือนก่อน +1

    There is so much technical/creative wizardry going on here I don't even know where to begin. Just incredible work!!!

  • @SnoddiesHobbies
    @SnoddiesHobbies 3 หลายเดือนก่อน

    That landing pad is awesome, and you did it without a laser cutter is inspiring. I always see folks who work with acrylic throw it in a laser cutter.

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      Thank you! It took a long time and was so nerve wracking 😂

  • @InakaAdventure
    @InakaAdventure 3 หลายเดือนก่อน

    Content #1

  • @TheMichaellathrop
    @TheMichaellathrop หลายเดือนก่อน

    You could always partially paint some of the metal to make it look weathered, or add some graffiti

  • @ScaleSpeedworks
    @ScaleSpeedworks 3 หลายเดือนก่อน

    Love it! Two things, first, where can I get that cool stencil? And second, would sanding the stencil area with fine sandpaper produce the same results?

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      Thanks! I don't know where I got it from. I can't find the order anywhere. If you search for a panel line scribing stencil you should be able to find something. This one is called "cormake" brand. I don't think sanding would work well at all and it would sand the stencil itself

  • @MemeCopium
    @MemeCopium 3 หลายเดือนก่อน

    Is that little solider from destiny 2?

  • @bobbybologna3029
    @bobbybologna3029 3 หลายเดือนก่อน

    Hey! BP! You stole my design! "LEDs ⤵"

  • @Parallax2814
    @Parallax2814 3 หลายเดือนก่อน

    What percentage of this build would you say was 3D printed?

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      3.5%

    • @Parallax2814
      @Parallax2814 3 หลายเดือนก่อน

      Are you sure 13% of the build wasn’t 3D printed by 50% of your printers?

  • @Hamentsios10
    @Hamentsios10 3 หลายเดือนก่อน

    Wait, that's not gartic phone!

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน +1

      I should make a garlic phone haha

  • @RalphGrella
    @RalphGrella 3 หลายเดือนก่อน

    When he cut the clear plastic, what did you hear? "This sound makes me..." what? I don't I heard what I think I heard

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      Makes me laugh. The acrylic kind of screeches

  • @DarthHugsALot
    @DarthHugsALot 16 วันที่ผ่านมา

    Why not put the restaurant at the bottom. Name a cyper punk film where the protagonist doesn't get food from a street vendor...

    • @BPCustomCreations
      @BPCustomCreations  15 วันที่ผ่านมา

      True. I can still add underneath if I want as well 🤔

  • @meganperkins4367
    @meganperkins4367 3 หลายเดือนก่อน

    Mention at least where from you copied the design bro

    • @BPCustomCreations
      @BPCustomCreations  3 หลายเดือนก่อน

      Joke's on you. The whole video is AI generated

    • @meganperkins4367
      @meganperkins4367 3 หลายเดือนก่อน

      @@BPCustomCreations I knew it! Needs more AI narration like the Inaka Adventure channel