Damn I've just bought a DG1. This is cheaper and it is showing temp and afr is great. Is this plug to the af1 module or 4 to 1 cable? Also, is the temp reading inline with app shown on the phone ?
@@giantlabs Did you try the app? The app programs the ecu and the Sport D should be reading from the ecu. The app has the settings to change measurement units.
@@sergemendes6870 que conector hay que poner para montar en una honda x adv ? Que diferencia hay entre el sport D y el cube G ? Pues lo he pedido y tengo dudas si cambio por el Sport D Gracias
@@PCOTTA-gs2mh sport D it’s for aracer ECU like RC MINI5 … , the oldest cube G it’s for OBD PLUG for oem ecu, I think the new cube G it’s for only aracer ecu ( like sport D ) but if you have rcmini5 ecu you can’t use the blink ( for Connect phone ). So : sport D - aracer ecu Old cube G - diagnostic connector - oem ecu New cube G - aracer ecu ( lost blink if it’s rcmini5 )
Does this support Farenheit?
eastcoastish no, only Celsius. too bad for people using farenheit
Did you use a AF1/AF2 for read the AFR indicator?
AF1
I can't get mine to change from chinese to english. Was yours already set? Have you done a firmware upgrade? Thanks
Press M and S at same time
@@sergemendes6870 wow thank you very much. How did you find this out?
@@mikee1216 I try all the possibilities 🥵
This shows engine temp and afr, that means is shows more stuff compare to dg1?
Chern Lee yes . Tps , rpm, afr wbo2 , afr, shift light for rpm or high temp, air temp, oil temp ... no clock it’s damn
Damn I've just bought a DG1. This is cheaper and it is showing temp and afr is great. Is this plug to the af1 module or 4 to 1 cable? Also, is the temp reading inline with app shown on the phone ?
Is so hard to find information on this product ;/
Connect to the 4-1 . I use it same Time with the phone on the app aracer when I’m in auto thune. Works fine .
@@sergemendes6870 I didn't know you can get afr reading from 4 to 1 too. But thanks for the information
Can units be set to imperial? Fahrenheit for temperature?
giantlabs I think not , try to ask the support 🤨
Yes, they should be able to. Try changing the settings in the app…. and it may reflect on the display. It should.
@@Image-X I bought one. There are no settings for fahrenheit. I sent an email to aRacer and confirmed there are no other units for temperature.
@@giantlabs Did you try the app? The app programs the ecu and the Sport D should be reading from the ecu. The app has the settings to change measurement units.
@@Image-X Yes my aRacer app is running in F. The Sport D was only programmed to display in Celsius.
Where did you get the Sport D? Been looking everywhere to buy one and can’t find it.
www.takegawauk.co.uk/product-page/aracer-sportd-multi-function-display-msx-125-monkey
the cheapest you will find anywhere else
@@sergemendes6870 que conector hay que poner para montar en una honda x adv ?
Que diferencia hay entre el sport D y el cube G ? Pues lo he pedido y tengo dudas si cambio por el Sport D
Gracias
@@PCOTTA-gs2mh sport D it’s for aracer ECU like RC MINI5 … , the oldest cube G it’s for OBD PLUG for oem ecu, I think the new cube G it’s for only aracer ecu ( like sport D ) but if you have rcmini5 ecu you can’t use the blink ( for Connect phone ).
So :
sport D - aracer ecu
Old cube G - diagnostic connector - oem ecu
New cube G - aracer ecu ( lost blink if it’s rcmini5 )
@@PCOTTA-gs2mh you plug it to the diagnostic connector ( in the monkey it’s a red connector near battery)
Did it come with a mount for there?
No