Just received mine in the post today. The quality is excellent, very impressed. Even the inside of the pipe is so smooth and nicely finished. Your install video will be very helpful 👍
My man when you've worked on ski lifts for a few years with bearing grease and engine oil, I've learnt how to stay clean aha. Thanks for watching and commenting as always mate!!
Hi...did you get any rattle/vibration noise from the primary pipe against the skuttle panel when all fitted back together when slow driving between 1,1.5 revs? As I have...thinking I havnt seated correctly?
Nope haven't noticed that much that I wouldn't put down to a placebo effect.... A bit punchier maybe? I have noticed dramatically the spool noise it louder and I can now hear it over music at a volume of like 10 which I couldn't before :)
If it's a wider bore or your still stock it probably will cause a lag of sorts due to it taking in more air. Same can happen with a wider bore piping in stage 2 and below maps as the turbo can't keep up with the air. Intake however shouldn't really make that much of a difference 🤔 The MAF sensor probably just needs a few miles to adapt is my main guess
@@CarRambles thanks for the reply, I was thinking that the ECU would need time to calculate the higher volume of air flow. I’ll give it some time :) only fitted it an hour ago 😅😂. Mines also, fully standard these are the first changes :)
Thx for super quick response, seen digger Dave do it without removing cowl, car is my daily so cant really afford to mess up (: , keep up the good work loving the channel its giving a lot of people the confidence to have a go themselves, respect
![โรงเรียนห้ามรัก โดนจับได้ตาย...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/4u02Sbr556Q/mqdefault.jpg)
I kind of like that there is always background noise like bird chirping, sounds like a relaxing place
Just received mine in the post today. The quality is excellent, very impressed. Even the inside of the pipe is so smooth and nicely finished. Your install video will be very helpful 👍
Really glad I could help :)
Car Rambles Very helpful. Also your hot side boost pipe install. Saved £60 fitting costs for that and the crossover!
Good job in a spotless white t- shirt and no dirt on it afterwards.nice one my friend
My man when you've worked on ski lifts for a few years with bearing grease and engine oil, I've learnt how to stay clean aha.
Thanks for watching and commenting as always mate!!
Hi...did you get any rattle/vibration noise from the primary pipe against the skuttle panel when all fitted back together when slow driving between 1,1.5 revs? As I have...thinking I havnt seated correctly?
Hello mate have you noticed any difference in performance since fitting this ? Great vids by the way 👍🏼
Nope haven't noticed that much that I wouldn't put down to a placebo effect.... A bit punchier maybe?
I have noticed dramatically the spool noise it louder and I can now hear it over music at a volume of like 10 which I couldn't before :)
Car Rambles thank you for the swift reply i run an ST as a daily and will most likely get this crossover 😁 i have the ITG filter etc already 👍🏼
@@valterRS yeah worth doing just knowing your that step closer to stage 3 aha
how did you fix the gap between your headlights and front bumper? I have tried a lot but I couldn't fix it?
Did you sort this? If not I might be able to help
Hey dude, I’ve just installed my crossover pipe along with a induction kit. But it feels sluggish and not as powerful? Did yours do the same?
If it's a wider bore or your still stock it probably will cause a lag of sorts due to it taking in more air.
Same can happen with a wider bore piping in stage 2 and below maps as the turbo can't keep up with the air.
Intake however shouldn't really make that much of a difference 🤔
The MAF sensor probably just needs a few miles to adapt is my main guess
@@CarRambles thanks for the reply, I was thinking that the ECU would need time to calculate the higher volume of air flow. I’ll give it some time :) only fitted it an hour ago 😅😂.
Mines also, fully standard these are the first changes :)
Ok it's time to get a map if your changing those items aha. That should be your next step 👍
Roughly how long did it actually take to change over the pipes.
For the itg crossover... you can get it done it about 10 / 20 mins easily
You don't actually need to remove the window wiper cover if you don't want to. Just a bit more of a tight squeeze if you don't
Thx for super quick response, seen digger Dave do it without removing cowl, car is my daily so cant really afford to mess up (: , keep up the good work loving the channel its giving a lot of people the confidence to have a go themselves, respect
I was so surprised how easy it was myself when I fitted mine 👍🔥🔥🔥🔥
Yeah I was expecting it to be like the sports cat and nothing go right aha