watching this man has exponentially increased my painting skills as a contractor over the last cpl years and the tools he shows have made my job easier when I do paint . thanks Chris!
homeowner and not a professional here. I am assuming that you are using the same paint on the metal as everywhere else. I was told that a different paint was needed for the drip edge than the rest of the trim. I believe in a round about way you covered this, but I was told that regular latex will peel.... I enjoy and learn alot from your videos.
I really liked this. The small tips like bagging the roller, tossing when done, and brush buddy for ladder climbing. Being new to diy I need to know these details. It helps to watch how you confidently work from a ladder, too, since that's still scary for me. Thanks
Many painters spray over the fascia, metal flashing and the edge of the roof shingles. I did this when I first started out and never had any complaint. It's the fastest method but it's not good practice. I didn't know any better back then.
Ever use the Picasso angled oval cut brush? Things are amazing for about a year. The Purdy pro extras are hard to beat as far as longevity. I just really like oval brushes and don’t know why they are not more popular. Never found one that lasted as long as my pro extras though.
Who would say you should not paint drip edge? Probably the same guys that say you need to use oil base on your garage door or it wont stick.....Here is the deal.... Both of those are factory painted with water based DTM paint. so the water base actually sticks better to it than the oil. They just dont know.
Do you caulk the gap between metal drip edge and fascia? I hate how in some spots there’s a gap and other spots it’s sitting flat, especially with white trim
Great video. What is the most fade-resistant paint for painting outdoor metal? I need to re-paint our trampoline frame. It is a dark hunter green. Several years ago, I painted it with Rustoleum spray paint. It faded within a few months. I read that water based paint is best. I'm planning to use a roller this time.
Wondering if you can share the best type of paint to use on metal substrate? I have a hard top metal gazebo that I wanna paint white and someone is selling a barn paint that’s meant for wood and when I look at the specs on it they don’t recommend anything other than wood. When you say you’re using a house paint I’m wondering if you can share what you recommend and if it’s possible to use paint that’s recommended for exterior wood such as fences and Barnes or should I get one specified for metal substrate?
Chris as always, thank you so much you are the best. 🔥🔥🔥maybe someone will need my life hack. I use knee pads when working on the stairs, it’s very convenient to rest your knee on the step and your knees don’t hurt after that and it’s easier to keep your balance.
I have had the Original Leaf Guard brand of gutters on my home for 23 yrs. Very happy with the function of the gutters. But after hand cleaning the mold and stains from the gutters, I noticed that the original colored finish (almond) has sustained sun bleach damage down to bare aluminum. What type/ brand of paint should I use to restore the rain cohesive properties of the curved top portion? Thanks Tim Smith
If you'll be getting a new roof, is it best to paint the drip edge to match the fascia before installation? Should the drip edge be sanded before primer, or is degreasing enough?
Do you ever use DTM, direct to metal paint. It works for the most part. Just wonder your stance on the DTM? Also what do you think about dry fall paint. Thanks man.
I (most of the time) Tape the roof lip and spray the soffits and fascia together so everything is done at once. Don’t have to go back and hand paint the fascia. Taping the roof lip is 100% faster even though it’s annoying. But going back and painting the fascia is also annoying…
@@gtdodgeviper correct that’s what I’m referring to. On each job it depends what I do. Sometimes I’ll tape a side and then otherside it’s easier to spray shield or stick cardboard under all the shingle roof lips
@@age_of_reason I use a spray shield as well. Some parts of the house I will tape and other it may be faster/easier to spray shield. Or stick cardboard under. Just depends. All those options obliterate going back with ladder movements and handpainting
It all depends on the condition of the facia when deciding which method is best to use,brush and roll or spray. If the facia is wore out looking kinda like roof sawn but not peeling I would brush and roll. If its smooth you can spray it. Or you can do both, the end result is what matters. Spraying the paint will have the paint on surface only, sometimes you have to work it in(back roll) to make it solid.
I could just hear the commenters OMG REALLY....Like anyone would get paid if they got paint all over the roof.....I mean Mr Idaho We might have some differences in opinion but that is just plain disrespectful. Nobody gets paint all over the roof and still gets paid.
Good job. Not sure if you had that extension ladder set up correctly. It looked like you had way to much lean to it,kinda like an escalator. You should be able to put your toes on the feet/legs of the ladder and reach out your arms straight and grab a step. That will give you the proper distance on how far the feet of the ladder should be away from the wall . 👍👍
@@prettyflush but you said not everyone is as nimble as us pure painters as if you were talking about him as well, if he a nimble pure painter it shouldn't matter ?????
@@jhljhl2207 I always use ladder hooks. And I wouldn't drop it. Rather be safe and keep working. Running the risk of spilling and or even worse falling. It takes two seconds to move that hook plus it's fun to carry em that way. Run the risk of getting paint on your hands. Or gloves. Schools out 😎
Hey man. Only noobs need ladder hooks. Hand always holding kettle/bucket, whilst arm through a rung/window/branch is ladder painting 101. It is the most natural feel and the kettle/bucket is always close to the target as when painting 101 on the ground for efficiency. Chris was reaching up a bit for sure but assess the feel and risk at the moment. When ever I go up high I always assess how and where I will fall etc. Also working at heights 101. Kris clearly felt comfortable. Probably cos he's done it a lot and nothing to do with him being a beast 💪🏻😅 Not to mention his tools.... geez Kris.
I would just spray it personally I haven’t learn much on your channel like everybody else does I see painter using you as there guide but when you experience you notice some thing you do is a little extra and don’t really matter and there thing I learn but we paint in different areas I’m in Florida. Well you in a spot that easy to paint due to our humidity and heat over here so I notice people cut corner over here that extra stuff usually make you loss money when most customer never even know what you talking about and think you just trying to sell yourself more business in Florida just different
@@Idahopainter I do learn from your video didn’t mean to come off wrong it just Im an a different area so some prep work sometime don’t work here cause of the humility in Florida we tend to just use certain product depending on the weather condition and I do try some of your stuff out at home but sometime I catch myself still doing what I learn from new construction and to me the paint never really matter to me as long as it not to watery I get the same quality with cheap paint wonder why people recommend other paint when to me it the prep work and how clean the surfer is that make the paint stick an last longer but I’m alway a student To life and looking to learn reason I’m here commenting but I’m a jack of all trades
watching this man has exponentially increased my painting skills as a contractor over the last cpl years and the tools he shows have made my job easier when I do paint . thanks Chris!
Wow, thanks
He does a great job, the dude cares about what he does
You’re the man Chris! Thanks for another great video. Rock on.
homeowner and not a professional here. I am assuming that you are using the same paint on the metal as everywhere else. I was told that a different paint was needed for the drip edge than the rest of the trim. I believe in a round about way you covered this, but I was told that regular latex will peel.... I enjoy and learn alot from your videos.
This man and his channel work wonders for me
Glad to help Amin
I actually like the look when the drip edge is painted the same color as the siding or roof shingles. Gives the look some depth. But to each their own
Listen, I just came here to watch you paint. 👀🔥
I really liked this. The small tips like bagging the roller, tossing when done, and brush buddy for ladder climbing. Being new to diy I need to know these details. It helps to watch how you confidently work from a ladder, too, since that's still scary for me. Thanks
Glad it was helpful!
Thanks for all the tips I learned soo much from all your videos
You are so welcome!
Chris, a paint job is as good as the PREP! Using top line paint. Good job! TGG Cheers! 🙂
Thanks 👍
Many painters spray over the fascia, metal flashing and the edge of the roof shingles. I did this when I first started out and never had any complaint. It's the fastest method but it's not good practice. I didn't know any better back then.
Everything has a price
This guy has made me such a beast in cutting and rolling I work for a union 🤟🏽🤟🏽
hello what kind of paint is that you are using
For exterior I prefer BM Aura
Which paint U used ?
What I want to say when I go to purchase it
I need wall finish in steel
Should you prime it first? I have some wood trim that is peeling. I assume I should sand and prime before painting. Thoughts?
How can I avoid brush lines when painting metal?
Hi, have you tried using elastomeric patch for the fascia before applying the paint?
Ever use the Picasso angled oval cut brush? Things are amazing for about a year. The Purdy pro extras are hard to beat as far as longevity. I just really like oval brushes and don’t know why they are not more popular. Never found one that lasted as long as my pro extras though.
Who would say you should not paint drip edge? Probably the same guys that say you need to use oil base on your garage door or it wont stick.....Here is the deal.... Both of those are factory painted with water based DTM paint. so the water base actually sticks better to it than the oil. They just dont know.
Lots say that
Can you paint a new, white drip edge, or does it need to be primed first?
Do you caulk the gap between metal drip edge and fascia? I hate how in some spots there’s a gap and other spots it’s sitting flat, especially with white trim
Great video. What is the most fade-resistant paint for painting outdoor metal? I need to re-paint our trampoline frame. It is a dark hunter green. Several years ago, I painted it with Rustoleum spray paint. It faded within a few months. I read that water based paint is best. I'm planning to use a roller this time.
Wondering if you can share the best type of paint to use on metal substrate? I have a hard top metal gazebo that I wanna paint white and someone is selling a barn paint that’s meant for wood and when I look at the specs on it they don’t recommend anything other than wood. When you say you’re using a house paint I’m wondering if you can share what you recommend and if it’s possible to use paint that’s recommended for exterior wood such as fences and Barnes or should I get one specified for metal substrate?
Rustoleum industrial enamel
Chris as always, thank you so much you are the best. 🔥🔥🔥maybe someone will need my life hack. I use knee pads when working on the stairs, it’s very convenient to rest your knee on the step and your knees don’t hurt after that and it’s easier to keep your balance.
I have had the Original Leaf Guard brand of gutters on my home for 23 yrs.
Very happy with the function of the gutters.
But after hand cleaning the mold and stains from the gutters, I noticed that the original colored finish (almond) has sustained sun bleach
damage down to bare aluminum.
What type/ brand of paint should I use to restore the rain cohesive properties of the curved top portion?
Thanks
Tim Smith
Thanks Chris 👍🇺🇸
You bet
Do you suggest priming the metal over the original factory paint before painting it?
I'm using self etching primer from the auto parts store.
Was fascia just pressure washed and ready for paint?
Yep
Hello where can I get the pants you use to paint your
I wear Thrive Workwear and BAD. They are available online
What would be a good brush to use with aluminum fiber? I wanna brush some small metal trim before i roll the panels.
The Brooke from www.paintlifesupply.com
Great video thank you! If the metal has never been painted, does it need to be primed? Do you have paint you recommend?
It does not need to be looks better
If you'll be getting a new roof, is it best to paint the drip edge to match the fascia before installation? Should the drip edge be sanded before primer, or is degreasing enough?
Thanks
Thanks for sharing. May I ask a question not completely relevant, what is the best sprayer on spraying mug, cup, plates etc. Thank you in advance.
Apollo Pro LE paintlifesupply.com
Do you ever use DTM, direct to metal paint. It works for the most part. Just wonder your stance on the DTM? Also what do you think about dry fall paint. Thanks man.
For drip metal the paint for the fascia is best
Hey Buddy, Great job! Your Magical 🧙♂️ like me! Beautiful Trade of Painting 🎨!
Have a Great day!
Thank you! Cheers!
I (most of the time) Tape the roof lip and spray the soffits and fascia together so everything is done at once. Don’t have to go back and hand paint the fascia. Taping the roof lip is 100% faster even though it’s annoying. But going back and painting the fascia is also annoying…
When you say roof lip are you referring to underside of the overhanging shingles?
I just use a spray shield. I stick it under the roof shingles and spray metal flashing, fascia and eves and siding if they're the same color.
@@gtdodgeviper correct that’s what I’m referring to. On each job it depends what I do. Sometimes I’ll tape a side and then otherside it’s easier to spray shield or stick cardboard under all the shingle roof lips
@@age_of_reason I use a spray shield as well. Some parts of the house I will tape and other it may be faster/easier to spray shield. Or stick cardboard under. Just depends. All those options obliterate going back with ladder movements and handpainting
It all depends on the condition of the facia when deciding which method is best to use,brush and roll or spray. If the facia is wore out looking kinda like roof sawn but not peeling I would brush and roll. If its smooth you can spray it. Or you can do both, the end result is what matters. Spraying the paint will have the paint on surface only, sometimes you have to work it in(back roll) to make it solid.
We throw away our brushes too, lol
Nap and roller? Are those 2 different things are the same? 😆 if different you throw away the frame to?
Same
I got all green metal gutters and downspouts I want to paint it all black! Should I prime it first? Nothing has been pealing ! Thanks
Yes prime
If the house is being painted satin white, can we use the same paint to go over the gutters or should they be a high gloss?
Lol whatever you want
Gloss will stay cleaner longer
gloss is easier to clean and better against fading, but you can use any sheen for any application
I use the same paint
I could just hear the commenters OMG REALLY....Like anyone would get paid if they got paint all over the roof.....I mean Mr Idaho We might have some differences in opinion but that is just plain disrespectful. Nobody gets paint all over the roof and still gets paid.
we call it flashing out in california, always paint it.
Agreed.
Good job. Not sure if you had that extension ladder set up correctly. It looked like you had way to much lean to it,kinda like an escalator. You should be able to put your toes on the feet/legs of the ladder and reach out your arms straight and grab a step. That will give you the proper distance on how far the feet of the ladder should be away from the wall . 👍👍
Hopefully they never decide to get gutters or they'll have hell trying to get that gutter under the drip edge xD
Why dont you use a handy pail instead of a brush buddy?
Why not just brush it, its faster
Bucket hooks are a thing lol
Nice looking house
Whatever works
Bruh ur not even using a ladder hook. I would never recommend holding a bucket on a ladder. Not everyone is as nimble as us pure painters.
Ok so why say anything you said us ????
@@jhljhl2207 u wanna drop ur bucket and look like a noob go for it bruh
@@prettyflush but you said not everyone is as nimble as us pure painters as if you were talking about him as well, if he a nimble pure painter it shouldn't matter ?????
@@jhljhl2207 I always use ladder hooks. And I wouldn't drop it. Rather be safe and keep working. Running the risk of spilling and or even worse falling. It takes two seconds to move that hook plus it's fun to carry em that way. Run the risk of getting paint on your hands. Or gloves. Schools out 😎
Hey man. Only noobs need ladder hooks.
Hand always holding kettle/bucket, whilst arm through a rung/window/branch is ladder painting 101. It is the most natural feel and the kettle/bucket is always close to the target as when painting 101 on the ground for efficiency.
Chris was reaching up a bit for sure but assess the feel and risk at the moment.
When ever I go up high I always assess how and where I will fall etc. Also working at heights 101.
Kris clearly felt comfortable. Probably cos he's done it a lot and nothing to do with him being a beast 💪🏻😅
Not to mention his tools.... geez Kris.
That guys arms look like mine
LOL
I would just spray it personally I haven’t learn much on your channel like everybody else does I see painter using you as there guide but when you experience you notice some thing you do is a little extra and don’t really matter and there thing I learn but we paint in different areas I’m in Florida. Well you in a spot that easy to paint due to our humidity and heat over here so I notice people cut corner over here that extra stuff usually make you loss money when most customer never even know what you talking about and think you just trying to sell yourself more business in Florida just different
I typically do spray it
@@Idahopainter I do learn from your video didn’t mean to come off wrong it just Im an a different area so some prep work sometime don’t work here cause of the humility in Florida we tend to just use certain product depending on the weather condition and I do try some of your stuff out at home but sometime I catch myself still doing what I learn from new construction and to me the paint never really matter to me as long as it not to watery I get the same quality with cheap paint wonder why people recommend other paint when to me it the prep work and how clean the surfer is that make the paint stick an last longer but I’m alway a student To life and looking to learn reason I’m here commenting but I’m a jack of all trades
First comment
😄 haha! 4th
Nice