Sir pls change this alloy wheels with new IMPACTO diamond cut alloy wheels (OEM) i have ALTO 2019 last Facelifted model i want to upgrade my wheels to those alloys too...😅 Btw love from MH 08❤
@@SHWETUU_ I somehow love the old school look of these OEM alloys more than diamond cut ones 😊 ... Thanks for the love. You can try the diamond cut alloys in your car incase you haven't installed alloys yet.
Thanks for your work on His beloved vehicle .. Moreover thanks for mentioning Late Animesh da ❤️ on your video and making him immortal forever.. Missing him every moment !! 😭😭😭😭 God bless you bro 👍👍
@@MototechWanderer 🙏🙏😇💕n bhai after we remove the headlight glass(cover) with hot gun aur when we fit it back do we just need only the hot gun to stick it (like don't we need glue to installed or) 😃
@@thejariilho931 In general, if we open it for the first time, that butyl glue can be reused just by heating it, if it has been opened 2-3 times, better to apply additional Butyl Glue (found in Feretrofit, Contact : 7871071177).
@@thejariilho931 projector is not available in Amazon. You can find it on Feretrofit website or contact the above mentioned guy. His name is Sathish. He should be able to help you with projector sourcing.
Sorry for your loss.. my deep condolences to the family.... Such a difficult time, losing a pillar of the family is devastating... I pray to god to give them strength...
Good Job bro.. Setup Looks neat and professional... You could have avoided the wiring jugaad by used H4 wiring harness. By using this you can even avoided the extra fog switch, because the wiring harness itself withstand the load of HID's..
Thank you. The reason why I designed my own wiring hareness is because I wanted to have a separate control over the HID. HIDs should also not be used for flashing (pass light) purposes.
One of the best fitting of projector video that I have come across in TH-cam. I purchased alto 800 bs6 in march 2021 but due to rules and regulations of the modification of headlight is illegal in bs6 so I will not going to do this. But I have watched your other videos, surely going to change the total rear light set with the led lights and the front set except head lamp. Just ordered the Hella 60 mm projector and going to set it under the Bumper as in bs6 it's DRL fog lamp. Specified videos that you have provided, nice n well. Good Luck 👍
Hi excellent video i also want to upgrade my swift 2010 headlights.. which projector shd i use? How much total did this set-up cost you? Eagerly waiting for your reply
@@MototechWanderer actually sir I am your big fan,1st I changed my car's wheel,then side light,tail lamp etc, Actually I am not able to do that type of work,which r done by you,so please suggest how I get good light means which type head lamp and which type fog lamp are used for my car Pls suggest good components speakers which you think better.....please suggest
@@amitde1546 get good quality HID Projector system installed in your car for permanent solution of good visibility. My channel a speaker related video, refer to that to get the best idea of component speakers.
You should be able to import NHK projectors in Srilanka. You can also try checking with Sathish (+91 78710 71177). He is a dealer of Feretrofit which is like a rebranded NHK projectors in India.
I think this video explains it well in detail. You will get most of the information from this video. Other than that, my channel has two more projector installation videos on motorcycles ... Just go through my channel videos.
Can i have your number?? Actually i have vw ameo and i want to install projectors in it. Thus i want to have custom made mounting bracket for projectors. I will be glad if you help me. Thank you 😊.
These are 3.2 inch projectors from FeRetrofit. All details are provided in the video description. The cost was around 35,000 INR. Till date it's working brilliantly.
Those are OEM Maruti Suzuki 13 inch alloys with upsized Yokohama Earth1 Tyres. Will have a separate video on that too. I don't like overly sporty wheels and stuff. 😊
@@MototechWanderer sir your car looks clean and superb. Love your work, i must say it's very very clean. I have the Alto k10 would love to get the same kind of headlight soon. I'll try to do it myself as i cannot get it done by you and i don't trust anyone else's work and cleanliness 😂. But truly your work is a gem. Big fan ❤️ from Kolkata
@@MototechWanderer thanks for the reply, just want to knw the only projector price, and projector comes with cable harness, can u share the projector link
Very neat. It is a wonderful setup. Is relay compulsory? Also why not LED? And yes, those test shots are critical part of the video after showing the process, without it it's nothing. I can see you're still addicted to "Fearless", nonetheless, you're making us get addicted too. Agree that this is complex for a DIY. For now, I'm happy with powerful halogens.
Yes Relay is indeed compulsory. HIDs draw heavy current on start up, hence good quality wire and relays are mandatory. LEDs still have some distance to cover in terms of color temperature. Hope LEDs also come in warmer colors making them more usable. Yeah I like the Fearless track 😊👍🏼🙏🏼 Thanks for watching.
I'm sorry for the loss of your friend. Praying for his family. That Figo looks cool, can understand how close you were to try on for first time. #staysafe
If we are looking at the rules, even the alloy wheels are extra fittings, also any sticker on any vehicle is illegal. So yeah, not exactly legal. However, on a broader picture, all the modifications are made inside the headlamp assembly and fog lamp assembly, no extra fittings.
The best thing about the video is that you didn't used any complicated tools and also that you explained everything in Hindi as well as English
@@blackpancake21 thank you so much!
Was eagerly waiting for this particular video from the last few months the projectors looks extremely amazing. Feeling so sorry for your loss...
Thank you so much 😊🙏🏼
your project is very good. Stay strong. We all lost someone near and dear due to this Covid. I wish This will not happen to anyone.
Thanks a lot for the concern. Glad you like the content. 😊🙏🏼
Sir pls change this alloy wheels with new IMPACTO diamond cut alloy wheels (OEM) i have ALTO 2019 last Facelifted model i want to upgrade my wheels to those alloys too...😅 Btw love from MH 08❤
@@SHWETUU_ I somehow love the old school look of these OEM alloys more than diamond cut ones 😊 ... Thanks for the love. You can try the diamond cut alloys in your car incase you haven't installed alloys yet.
Thanks for your work on His beloved vehicle .. Moreover thanks for mentioning Late Animesh da ❤️ on your video and making him immortal forever.. Missing him every moment !! 😭😭😭😭
God bless you bro 👍👍
That's my little bit for him ❤️
He will be missed forever. 😓
Good Quality Video And Good Knowledge 👍
@@ikaushikgondaliya thank you! Glad you liked the content 😊🙏🏼
Thank you for explaining in english too. Hope all your uploads are same 👍🙂
Sure 😊
Keep updating more on Alto 💕love from Northeast Nagaland India 💜✌
Thanks you. More updates coming. 😊👍🏼
@@MototechWanderer 🙏🙏😇💕n bhai after we remove the headlight glass(cover) with hot gun aur when we fit it back do we just need only the hot gun to stick it (like don't we need glue to installed or) 😃
@@thejariilho931 In general, if we open it for the first time, that butyl glue can be reused just by heating it, if it has been opened 2-3 times, better to apply additional Butyl Glue (found in Feretrofit, Contact : 7871071177).
@@MototechWanderer thank u so much I will try it 👍✨n plz give the amazon link of the projector
@@thejariilho931 projector is not available in Amazon. You can find it on Feretrofit website or contact the above mentioned guy. His name is Sathish. He should be able to help you with projector sourcing.
Karol bag ❌
Bhai ke ghar lejani hai ab head light modification ke liye ✅🤣🤣
@@bhaveshbirhade9566 yaar isko karolbagh se toh compare kro plz 😂🙏🏼 ... Bezzati kar di.
@@MototechWanderer sorry bro 🫂😅🤣
Alto G Class 🔥🔥🔥
Arey bhai bhai ...thank you 😁🙏🏼
Can we use “BI-XENON : MINI H1 7.0” for high beam ?
You can try.
@@MototechWanderer Thanks for the response
Sorry for your loss.. my deep condolences to the family.... Such a difficult time, losing a pillar of the family is devastating... I pray to god to give them strength...
Thank you so much ❤️🙏🏼 ... I pray the same. 😓
Good Job bro.. Setup Looks neat and professional...
You could have avoided the wiring jugaad by used H4 wiring harness.
By using this you can even avoided the extra fog switch, because the wiring harness itself withstand the load of HID's..
Thank you. The reason why I designed my own wiring hareness is because I wanted to have a separate control over the HID. HIDs should also not be used for flashing (pass light) purposes.
One of the best fitting of projector video that I have come across in TH-cam. I purchased alto 800 bs6 in march 2021 but due to rules and regulations of the modification of headlight is illegal in bs6 so I will not going to do this. But I have watched your other videos, surely going to change the total rear light set with the led lights and the front set except head lamp. Just ordered the Hella 60 mm projector and going to set it under the Bumper as in bs6 it's DRL fog lamp. Specified videos that you have provided, nice n well. Good Luck 👍
Thanks a lot 😊🙏🏼
😍😍😍
Wow the look 😍😍
Thank you 😁❤️🙏🏼
Kya isme dust aur pani chla jta hai muje bhi y apni celerio mai lgwana hai reflector open krke
Jis tareeke se ise seal kiya gaya with after market dust cap, isme na paani jata hai aur na dust.
@@MototechWanderer bhaiya y after market dust cap kaha milega ap bta do mai leluga plzz kyuki mai Aj jra hu light lgwane
@@piyushjohal2159 Video description check karo, update kar diya saara detail.
මරු ඕයි... Superb...!!
Thanks 😊🙏🏼
Very Informative, Thanks 😃
Glad you liked it. Thanks for watching 👍🏼
Hi excellent video i also want to upgrade my swift 2010 headlights.. which projector shd i use? How much total did this set-up cost you? Eagerly waiting for your reply
Go for the same setup ... 30-35k INR is the setup cost. It's well worth the investment.
Sorry for your loss bro
Be strong ...his soul RIP
Thanks for your concern 🙏🏼
I would like to try this but on spare headlighta not on the oem ones for sure.
You can try on a pair of new spare Headlamps. Maruti Suzuki spares are rather cheap.
@@MototechWanderer yeah ill try on new spares as i have 2012 varient of this car its gonna little different, due to differences in headlamp design
Superb work bhai bahot achcha he
Thank you 🙏🏼🙏🏼😊
Please suggest me the head lamp for my alto vxi plus 2021 model,plsssss sir🙏🙏🙏🙏🙏🙏,I m waiting for your reply,
What do you want me to suggest? All the details are mentioned in the video and links are in the description.
@@MototechWanderer actually sir I am your big fan,1st I changed my car's wheel,then side light,tail lamp etc,
Actually I am not able to do that type of work,which r done by you,so please suggest how I get good light means which type head lamp and which type fog lamp are used for my car
Pls suggest good components speakers which you think better.....please suggest
@@amitde1546 get good quality HID Projector system installed in your car for permanent solution of good visibility.
My channel a speaker related video, refer to that to get the best idea of component speakers.
@@MototechWanderer any brand or link for hid projector,and fog lamp
Feretrofit. It's mentioned in the video description.
What is the total cost of projector with ring r
Total costed me around 30k. Full setup.
hi can you plz send those pair of head lamps for srilanka
You should be able to import NHK projectors in Srilanka. You can also try checking with Sathish (+91 78710 71177). He is a dealer of Feretrofit which is like a rebranded NHK projectors in India.
@@MototechWanderer woww ❤️ thank you so much
If i am a beginner then please let me know how to fix projectors by nut and bolts?
I think this video explains it well in detail. You will get most of the information from this video. Other than that, my channel has two more projector installation videos on motorcycles ... Just go through my channel videos.
Thanks ..
Can i have your number?? Actually i have vw ameo and i want to install projectors in it. Thus i want to have custom made mounting bracket for projectors. I will be glad if you help me. Thank you 😊.
@@luckyyamahar15 you can connect to me on my Instagram handle.
Bro its which size of projecter u use for is? Hows works till now..am also planing to do in my alto 800 whats ur opinn? And how much cost around ?
These are 3.2 inch projectors from FeRetrofit. All details are provided in the video description. The cost was around 35,000 INR. Till date it's working brilliantly.
Time to upgrade those wheels !
Those are OEM Maruti Suzuki 13 inch alloys with upsized Yokohama Earth1 Tyres. Will have a separate video on that too. I don't like overly sporty wheels and stuff. 😊
@@MototechWanderer sir your car looks clean and superb. Love your work, i must say it's very very clean. I have the Alto k10 would love to get the same kind of headlight soon. I'll try to do it myself as i cannot get it done by you and i don't trust anyone else's work and cleanliness 😂. But truly your work is a gem. Big fan ❤️ from Kolkata
Thanks a lot 😊🙏🏼
@@MototechWanderer sir how much is the budget for this setup?
@@AVSGARAGE approximately it costed me 30k INR.
Superbb❤️❤️
Thanks 😊👍🏼
Working Is Good Net
Thanks!! 🙏🏼
Hai
Hi
Can you deliver to mizoram...if you can how much i need to spen money
Just check around if your city has some car decors who can do these retrofitting jobs.
Bro i have alto 800
I want normal Projector with HID what will be the price ? Any idead
The Chinese ones will be 10-12k INR full set.
bhai ye setup aap mujhe kar ke do gey....? mei head light aapko bhijvau to?
Kar sakte hai.
I think you have installed alloys in alto.. Plz suggest it's of which size
I have installed MGP 13inch alloys. I will be making a video soon.
@@MototechWanderer thanks btw which tyre section.. Will the stock one will fit or have to change the tyre
165 65 R13 Yokohama Earth1
Stock is 12 inch, need new tyres to upsize the rim.
On road test of vstrome headlight is what, im waiting for
Will cover that too. Practically the output of the Car and Vstrom is exactly the same as its exactly identical setup on both
Neat work
Thank you 😊
Awesome
Thank you 😊👍🏼
Alto headlight projector price
The whole setup costed around 30k.
Inspiring 🌹...
Thanks 😊🙏🏼
Bro pura kitna kharcha aaya aapka
30k INR approx
nice
am sangram from jalandhar city
Thanks and Hi 😊
HELLO.😇
Nice job. Can u tell me the projector price
Thanks. The whole setup costed me approx 30k INR.
@@MototechWanderer thanks for the reply, just want to knw the only projector price, and projector comes with cable harness, can u share the projector link
Only projector body pair costed 9.5k INR.
@@MototechWanderer can u share the website link
Already present in the video description.
Very neat. It is a wonderful setup. Is relay compulsory? Also why not LED?
And yes, those test shots are critical part of the video after showing the process, without it it's nothing. I can see you're still addicted to "Fearless", nonetheless, you're making us get addicted too.
Agree that this is complex for a DIY.
For now, I'm happy with powerful halogens.
Yes Relay is indeed compulsory. HIDs draw heavy current on start up, hence good quality wire and relays are mandatory. LEDs still have some distance to cover in terms of color temperature. Hope LEDs also come in warmer colors making them more usable.
Yeah I like the Fearless track 😊👍🏼🙏🏼
Thanks for watching.
I'm sorry for the loss of your friend. Praying for his family. That Figo looks cool, can understand how close you were to try on for first time.
#staysafe
Thank you. 🙏🏼 ... Wish the family gets all the strength to fight through.
@@MototechWanderer True about LED colour temperature. You're already an HID guy so will be something to take on with the LEDs😀
Bro u from telangana
Yup
Kitna kharcha aayega
25k ke aas paas minimum
Price ?
Setup costed me 35k INR.
Rip brother
😓🙏🏼 May his soul RIP.
🤞
😊😊
Hi ❤️❤️❤️❤️❤️❤️
Thank you ❤️😊🙏🏼
That’s not legal I suppose
If we are looking at the rules, even the alloy wheels are extra fittings, also any sticker on any vehicle is illegal. So yeah, not exactly legal. However, on a broader picture, all the modifications are made inside the headlamp assembly and fog lamp assembly, no extra fittings.
लो vaccination अब देखो वैक्सीन वालों का हाल
Maine li hai ... Perfectly healthy and doing fine.
Man only one language- Its annoying - If not get a second channel... Maybe....
Second channel, may be in the future. For now I can only do a two language mix as both are commonly spoken in the country.
@@MototechWanderer I understand mate... Good luck.
Hindi jyada bola kr, angrej ban raha h yr tu toh
Jitni aati hai utna hi bol rha hu banne ka kya hai isme
Jitni aati hai utni hi bol rha hu banne ka kya hai isme