ฝัง
- เผยแพร่เมื่อ 6 มิ.ย. 2021
- How to use the HBHF Sensor the correct way - RUST Electric Guide
I say OR switch in this video a lot... its AND switch, only the AND switch... AND, AND, AND!! :-)
So this RUST electric guide video is all around the HBHF sensor and how to use it properly. In this RUST guide I will show you how it functions and I will even show you how to properly wire it up using the AND switch.
The HBHF sensor is short for heart, breath, heat and footstep and basically means it will detect anyone within a 20 metre radius and output 1 power when it does. If there's more than 1 person the HBHF sensor will output an additional 1 power for every additional person.
I will show you the best trap base design I've found with this HBHF sensor and I will even show you step by step how to build the circuit to make a really deadly and effective HBHF trap base.
I hope you enjoy this RUST tips and tricks electricity video starring the HBHF sensor. I really hope you enjoy the trap base design and even build it and get some good results from it.
❤ Stay Connected with social media
Instagram: / ani.cod
Facebook : / anicodyt
Twitter : / ani_cod
TWITCH : / ani_codyt
Discord : / discord
Become a Patreon : / anicod
Donations without the hassle : streamelements.com/anicodyt/tip
❤ Watch my other videos:
✔✔ MODULAR CARS | Update 2021 | RUST Guide | Step by Step:
• MODULAR CARS | Update ...
✔✔ Beginner Guide to Electrical Wireless Circuits in RUST 2021:
• Beginner Guide to Elec...
✔✔ WIND TURBINES | Everything you need to know | RUST | Electrical Guide:
• WIND TURBINES | Everyt...
✔✔ DOME Guide | RUST Monument | How To | Walk Through | Get up and Down With
Ease: • DOME Guide | RUST Monu...
❤❤ Don’t forget to leave a like/comment!
Subscribe if you’re new! ❤
Please comment down below if you have any suggestions on which video you wanted to see next.
Thanks for visiting! ❤
#RUST
#AniCod
#RustGame - เกม
Let me know what you want to see next you bunch of legends! :-)
Ty for the help I new most of what u were saying but for the rest did Not know
I'm currently trying to figure out how to make a smart switch door opener and closer system that uses an HBHF and a timer to close my internal garage doors automatically when the HBHF sensor doesn't detect me in my base after a set amount of time. I'd be able to open and close my internal doors with Rust+ like a standard setup but it would be idiot-proofed somewhat in case I forget to close them myself but would also stay open as long as I'm in my base moving around. I'm too smoothbrained to figure it out though. If you want to do a video about that kind of setup I'd appreciate it :)
If I understand this correctly, I can use the HBHF sensor paired to a light and a counter to tell me that I am being door camped and by how many people?
@@woollygoat8921 yes, exactly that. HBHF outputs 1 power for each person :-)
@@daybidbanderbecht5299 What do you mean by "sensor doesn't detect me in my base after a set amount of time"?
The HB sensor will detect you if in range. If your open circuit is done correctly, the doors will close when you're out of range. Can you please clarify your question?
Thank you for the AND switch thing.. i used to use hbhf a lot before they made it 1 power max output, found a complicated video that use memory cell and some other component but was too confusing to remember on the fly, this just simplified my biggest problem.. never would have guessed 1 comonent would fix it
Wow... 5 times watching trap base tutorial ,got pictures of every room and after half hour i get it all, ty you got sub xD
thanks :-) I'll make a video on different trap bases.
Brilliant! Now I have a visual AND audio cue for gate campers lol should put an end to getting instantly blasted at the door when going for a recycle run
Subscribed thanks for the info
Mint vid as usual cheers man!
no problem, thanks for the support
i love rust electrics most circuits can be made 2 ways, i do all this with memory cells
hey man! im still really new to rust and im just wondering when it comes to hbhf sensor is it possible to connect it to the rust + app? if so would there be a chance of sharing how to? i havent seen a video on that yet thank you!!
Great video, i will use this to open my door
Go for it! Thanks for the comment
Just a question how do i get 4x heart beat sensors to connect to the B side on a and switch?
You sir, are the legend
nope nope nope! YOU'RE THE LEGEND!
Very nice video, I really liked it!
One question: I recognized my turrets are still using power from the batterie, even when they are disabled because noone is close to the sensor. Any way to make them not using any power when turned off?
U are the legend!
i disagree....... its definitely you! thanks for making it to the end
i KNOW YOU explained pretty well, but I'm honestly still lost on some parts cause I didn't exactly see where the wires go, itd be nice if you could reupload with building it from square one, please thank you!!
that ominous wire leading to the door is always a dead giveaway to experienced players
Great video! Easy to follow along as a newbie to electric! What would I have to add to the circuit so that once the sensor is triggered it stays on (even if someone goes out of range), and requires a manual reset to turn off again?
Hi im a bit late but you can use the Memory Cell.
The way that cell works is that it has 2 outputs: Output and Inverted Output.
There are 4 inputs: Power In, Toggle (dont worry abt this one), Reset, and Set.
Memory cell has a value it stores, 0 or 1. When it's 0, Inverted Output allows power through. When it's 1, Output turns on.
When power goes into Set, the value changes to 1.
When power goes into Reset, the value changes to 0.
Wire the HBHF sensor to Set so that any time it recieves a signal, it will set the Memory Cell to 1, allowing power through.
Then, to turn it off, wire any input of choice (button, RF reciever, etc) to Reset. When this is triggered, it will set the Memory Cell to 0, no longer allowing power through the normal Output.
Do you have schematic for turret setup? not fully understood
I dont know so little views on this awesome video.
a year ago i used to get 20 views per video... 600 is huge for me haha. thanks for the comment
I've a challenge for you, 2 DC's & AT setup, triggered by one of 2 HBHFs, BUT if both HBHF are destroyed, the DCs & AT switch on also [tamper circuit]
It is possible. :)
btw 1 foundation is 3 & 1/3 metres, so range is 10m
Would you mind explain (i'm kinda late but anyway)
1+1=2
"Now I hope I haven't lost ya."
Your edits get better and better man love the rust how-to videos.
haha, thanks for the comment. Now im getting more confident the videos should keep getting better..... ( in general :-) )
I just found one of these in a barrel, and I wanted to use it to make sure I’m not getting door camped but I think I’ll just stick with sound whoring for the footsteps 🤣🤣🤣
GREAT WORK! ty [=
AniCod, can you do more videos about the AND switch and the memory cell. Traps or power management?
I'll be doing more like this. for the time being. AND switches and other smart switch videos; th-cam.com/video/ZHP_S8fSdKM/w-d-xo.html Memory cell video; th-cam.com/video/usj2BSHL-uU/w-d-xo.html
Not because I have a grudge on anyone in particular but can you make a variation of the trap, just the room... Maybe a dummy box or two... But the "floor is actually made of the barbecue grill and when the door closes furnaces under the floor... Lit up and dinner is served?
Bro, are you a electrician irl?? lol thank you so much.
what does blocker video in the cards mean
How do you wire the turrets so that they hsve no power consumption till they get triggered ?
The exact same thing happens when i listen to you as when i'm talking to a pretty girl. My brain turns to mush.
haha love this comment.... just to make it clear though... im not a pretty girl!! :-)
You mean the AND switch not the OR switch on the trap base, right?
can you show us how to do the whole second part please?\
What servers can you practice this on because on the sandbox that i am playing on its appears those sensors dont work and i cant test it.
on PC just type in the modded part of the search bar "BUILD" and you will see loads
Currently having a issue the HBHF its not picking up unauthorized people, but IT does manage to catch authorized,. Alarms are all working and receiving power, but not for unauthorized people, Same goes for Smart Alarm pared with HBHF, if you have any idea it would help a ton.
you can alter the HBHF to react to authorised/unauthorised.. look up at it while its powered and you should get the option
1:45 i have 2 power going in via branch and for some reason my HBHF sensor is not outputting the extra 1
how many me al does it cost?
This man explained a basic computer science principle in the simplest way ever
can you do a tutorial on the hahf sensor with tesla coils??? ;)
yes....... its really that simple.... yes, ill start work on it now :-)
Awesome trap electricity is still underused in rust today
absolutely correct. People with the knowledge have the advantage
Hey mate, I’ve watched this video completely countless times and I seem to be missing some steps. Basically I can’t quite figure out where the wires in the front door connect to the wires roller doors at the back. I have a similar based what you have except instead of two garage doors. I have three garage doors with three turrets. do you think you can give me some kind of guide to get me through this as I have spend 6 days, trying to figure it out what I’m doing wrong. And the biggest problem is, I know nothing about Electricity in the game or in real life and you obviously are quite good at this and I feel that you are talking quite quickly which would be great if I knew what some of the terminology meant however because you’re talking quite quickly 90% of it’s going right over my head. Is there anything you can do to help open ever in your debt.
Cheers mate
Regards
Goth.
Did they patch the auth part bc I I can't change it to auth protected
Did you power the sensor first? You can't change settings on anything unless it's powered first
Personally, I do not advise people to have turrets only be powered when detecting heartbeats. The delay to startup gives significant time to run past, get to cover, etc. Turrets should always be powered on.
They have their place, for your needs, powered on is the way lol
So the torrent don't consume electricity? then the battery never be empty?
They do consume power. You need solar and/or wind turbine charging circuit.
During the day my base runs off the solar/wind with excess power charging batteries. At night it automatically switches over to battery power.
So really you should only be using batteries at night or for short term power needs
@@DownLow0099 ok thanks
HOW: if HBHF Sensor is destroyed, then turn on autoturret ? How turn on autoturret timer (HBHF Sensor triger, ~5min)
I'm a legend
No card shows up for showing how to do dome. Just FYI
How do i activate 2 or more teslas from a hbhf? Ive been stuck for hours... Honestly this isnt easy 🙈🙈
always pair the HBHF sensor up with the AND switch, HBHF one side and decent permenant power in the other, when the HBHF activates, it lets power through.... hope that helps dude :-)
@@AniCodYT i'll experiment in a practice server, tyvm. The only other issue i had (with a hbhf and 1 tesla) is that no matter what i did to change the settings on the hbhf.. it would detect me and shock me even though i wanted to be immune from it. Tyvm for the videos you show ☺️
Big problem of this sensor is his loud sound :D
i was doing this at night with solar panells and was thinking hwy the hell it doesnt work
I dont get the turret w and switch. If the power output is always 10+ (powering turret), then what does the 2 power hbhf branch do? Wouldnt the and switch ignore the 0 signal -> 1 signal because the 10 is always present?
I started with this and still use it for internal defense. Use a smart switch to allow main power to flow to and and switch with the silent alarms. Activate kill players for a great offline defense.
The memory cell is another friend of the hbhf, which sends a signal to the SET input, taking the base from safe mode to offline raid defense. I have successfully defended 8 offline raids with none breaching the first door past the kill zone. Doors close behind and others open to reveal exterior sentry turrets while the players inside are electrocuted and my phone tells me i got some free boom/gear. All because the 0 port switched to 1 the raiders are devoured.
It didn’t work on console rust, also it’s a tier three part.
my head hurts
haha... its not easy to get your head around but once you start too its actually really easy
The HBHF sensor isn’t working it isn’t outputting 1 energy
You are calling an and switch an or switch
you need the AND to be paired with the HBHF as you need both inputs to receive power before it outputs... the OR switch only needs one or the other to output power.
Heyg Bee Heyg Ef xD I hate when people cant say just H but need to say Heyg or some crap like that... Its very annoying...
its literally the worse thing to happen in modern history XD
I don't know why you guys pronounce your h's as hach like you put too much annunciation on it lol
And they don't know why you don't...