Hey mate, I'm just about to put a 2" lift in my bt50, your video was one of the most helpful, have done plenty to GQ & GU's, first time owner of bt, so thanx and keep the shiny side up 👍👍
Does the US version have the same suspension as the Global Version? I wanted to buy the 2inch BDS leveling kit, for the global version, but I’m not sure whether it’s gonna fit
Do you know how many mm is the offset when flipping the drive shaft centre bearing bracket? How much does it drop the centre bearing to stop vibration. And does your ford ranger shudder when taking off from a stand still at all ?
@@AUZUP4X4 I installed on my PX3 the dobinsons MRR 3 inch front 2 inch rear . I'm using the dobinsins spacer at 4 washers which is 16mm. I get a slight shudder between 10km/h and 15km/h. Getting slight shudder on take off from trafic lights. I will flip the centre braket and see if it helps. Thanks 👍
@@AUZUP4X4 rear lift has a metal block that you place between the leaf spring and axle, on the same block there is a pin (botton) on one side that fits and a hole on the other side, one end fits into the leaf spring and the other end fits on to the axle to keep the block in place. Do you remember the size of the pin on the block?
![แม่กลองสองใจ - ซีแกรม โตเกียว มิวสิค [ OFFICIAL MUSIC VIDEO ]](http://i.ytimg.com/vi/GSQfVjcr_f4/mqdefault.jpg)
Hey mate, I'm just about to put a 2" lift in my bt50, your video was one of the most helpful, have done plenty to GQ & GU's, first time owner of bt, so thanx and keep the shiny side up 👍👍
Thanks mate good to here that I could help out
useful and great video.
Thanks mate
This is the first video I've seen where they did a carrier bearing drop. Was the diff already dropped on this build .
Hey mate no it wasn't it this car was all standed before the suspension swap cheers
I see you flipped the drive shaft carrier. is that the fix for drive shaft with lifts? Some kits talk about a drive shaft spacer kit??
Yeah mate its so you don't have to use the spacer kit I've had it in for over a yr now and have had no problems with it
Does the US version have the same suspension as the Global Version? I wanted to buy the 2inch BDS leveling kit, for the global version, but I’m not sure whether it’s gonna fit
Hi there I wouldn't be 100% shore but I wouldn't think it would be that different
Do you know how many mm is the offset when flipping the drive shaft centre bearing bracket?
How much does it drop the centre bearing to stop vibration.
And does your ford ranger shudder when taking off from a stand still at all ?
Hey I'm not Shore of the off set. this is what I have done to all the lift kits I have in stalled to rangers. Also not I do not get any shudder at all
@@AUZUP4X4 I installed on my PX3 the dobinsons MRR 3 inch front 2 inch rear .
I'm using the dobinsins spacer at 4 washers which is 16mm. I get a slight shudder between 10km/h and 15km/h.
Getting slight shudder on take off from trafic lights.
I will flip the centre braket and see if it helps.
Thanks 👍
At 15.25 secs.. what did he do there?? Did u had to do a diff drop?
All I did was flip the center bearing as thay are off center, also no I didn't put a diff drop in as thay are only set to 2 half inch
hi Auzup4x4
do you recall the size of the pin on the rear block lift?
Hi there sorry what do you mean mate
@@AUZUP4X4 rear lift has a metal block that you place between the leaf spring and axle, on the same block there is a pin (botton) on one side that fits and a hole on the other side, one end fits into the leaf spring and the other end fits on to the axle to keep the block in place.
Do you remember the size of the pin on the block?
Hey mate, can you send me a link to what lift this is ?
www.autopartsco.com.au/dobinsons-mra-adjustable-75mm-lift-kit-ford-ranger~130938?gclid=CjwKCAjwoduRBhA4EiwACL5RP5p0EDCmYQUhBzHohLdQDuDeXtvTKTp_2VSJ1QsY0H7lePhUGkKBmRoC0a8QAvD_BwE
Hey mate this should be the one
Upper arm std can support how many high ? 3.5inch lift can?
As im told up to 3" thats it
how many mm thick spacer was used previously?
I had 2" in it mate
@@AUZUP4X4 2"=50mm? So high lift 3inch when use spacer 2" thick
@@amsoil8669 hey mate sorry what do you mean
U bolt got wrong installed