arcusin tells in the instructions you should start with a stack half height and continue adding 1 bale higher with each stack. This will support the full height stack so it does not fall over. You want to pack the bales tight with the baler.This will support the full height stack so it does not fall over. It is a lot a weight on the bottom bales and a tight bale supports the load better and is more stable.
You have to understand, as we say in my country no one is born taught. Everything you learn with practice and time. Thank you very much for your comment. Greetings from Spain.
The truth is that it is very dangerous what they do. The best thing is that the floor is level so there are no problems that could fall. But, you can always stack the first bales with a tractor or manitou, and then support on these arcusin discharge. Thank you very much for your comment. :)
We use a wireless camera on a portable stand to see where the stack is when unloading. Move the stand and the stack gets longer.... If this stack is too high...they make several models that can make a stack 2, 3 or 4 bales shorter. It takes a flat, firm, level place to build a stack and practice. But once you have the idea, it is very quick to use and easy to operate. They are very well build machines.
At the start of the stack need some help. One can only be done, but it gets better with two. The most important thing to start with is that the floor is smooth. You can find more videos of mine in which one person download handedly. Thank you very much for your comment and be sure to visit my channel. :)
Algo hisieron mal, los fardos no deberian haberse desliazado en 2:58, los deberian estar sujetando las horquillas bajo estos. They did something wrong, bales shouldn't have slid in 2:58, they should had been hold by the forks that sit under them.
The unload is late little. If you see the rest of my videoes you can verify it. The unload is complicated because the soil was not smooth, and one was starting constructing the battery of bales.
If the ground is level there is no problem and quickly download. If you see the rest of my videos that I have arcusin, you will find it much easier. Thank you very much for your comment.
The supervisor should have told the telehandler to backed-up a bit, to allow the bale trailer to push the bail stack 'over centre' initially, -to allow for 'spring back'. They would have remained standing first time then and the other stack would not have been knocked and toppled.
Very dangerous stacking that high without a support to lean into. If they don't fall today they will fall tomorrow. Sad to say many deaths have been caused by falling big bales. Be very careful.
La pila no se empezó como manda hacer el fabricante del Arcusin. Intentaron empezar "la casa por el tejado" y esto es lo que ocurre... Cuando las cosas se hacen mal, es muy difícil que terminen bien.
Paco Jiménez Recomienda empeza con poca altura, y sobre ella ir descargando otras más altas. Imagina la mitad de una piramide. Sobre la pared que creas, descargarías los carros completos. Siempre hay que empezar a hacerla con cargas parciales del carro, y nunca hacer lo que se ve en el vídeo.
too much pressure on tejescopic loader did not allow new load to lean back always stack uphill if stacking down hill leave gap at bottom of new stack start new line by putting 2 loads at right angles to previousline at start of new line how the corner forks put up with the weight I do not know !
Agrosdemeter You are so right about people not reading manufacturers manuals because i am always telling my sons about reading instructions. They often buy things that seem simple to use and discard the instructions only to look for them later because what ever they bought is not working right.
Wouldnt have one if they paud me to take it. Far to much stuffing around to unload, you have to have a spotter with you when unloading. I thought the hole idea was t save on time and man power. Yall must do it a bit different over there
Das Problem, das ich habe, ist, dass der Boden nicht ganz flach. Einige verbringen eine Leine, um ihn im Stich gelassen zu. Auf diese Weise sind Downloads perfekte und es gibt keine Gefahr, Stroh-Pakete. Aber oft gibt es keine solche Einrichtung, und tun Sie es, wie Sie können. Ein Gruß.
It is dangerous if you do not do things right. It should be a wall with less height, and gradually have to increase. Another option is to the wall with a shovel and a tractor, and then download against it.
This is not a new idea. I watched a similar stacking trailer 40 years ago fail the same way. You can't stack bales like that without them falling over.
oh...they can also pick up bundles of small square bales...but get one of the shorter stack height machines if this is your plan...small squares are not packed as dense and cannot take such a tall stack. Check out their web site...arcusin.com
Not a one man operation like Arcusin claims......It is so much faster if you hook it behind an F-350 and run around the field at 50 mph, it's what I do in FS 2013. haha
mal machina, porque el material no hace como el condutor quiere. warum rutschen die ballen beim kippen nach hinten raus? dadurch wird das eh schon nicht optimal quaderförmige und elciht deformierbare stroh nochw eiter deformiert und steht bei derartigen höhen von vornherein schon schräg. da gibt es bessere auflieger/anhänger zum quarter ballen stapeln! und die trottel zeigen hier auch noch wie schlecht ihre maschine funktioneirt. oder ist es nur ein bedienfehler vom legasteniker personal?
don t be so f cking mean people always judging from the sideline...you can do it better ??? try it yourself....we are all human...so we can make all a failure...
Pasan los años y me sigue encantando ver este video!
arcusin tells in the instructions you should start with a stack half height and continue adding 1 bale higher with each stack. This will support the full height stack so it does not fall over. You want to pack the bales tight with the baler.This will support the full height stack so it does not fall over. It is a lot a weight on the bottom bales and a tight bale supports the load better and is more stable.
This video is a clear example of what never has to do with a arcusin. Thanks for your comment. Greetings from Spain.
You have to understand, as we say in my country no one is born taught. Everything you learn with practice and time. Thank you very much for your comment. Greetings from Spain.
The truth is that it is very dangerous what they do. The best thing is that the floor is level so there are no problems that could fall. But, you can always stack the first bales with a tractor or manitou, and then support on these arcusin discharge. Thank you very much for your comment. :)
We use a wireless camera on a portable stand to see where the stack is when unloading. Move the stand and the stack gets longer.... If this stack is too high...they make several models that can make a stack 2, 3 or 4 bales shorter. It takes a flat, firm, level place to build a stack and practice. But once you have the idea, it is very quick to use and easy to operate. They are very well build machines.
Very nice video. How much land do you hay? It seems dangerous but I would guess if the ground is level it would be better.
Thank you very much for your comments. From what I read, you know very well how to work a Arcusin. I hope to make more videos this summer. A greeting.
WOOOOW THE SOUND IS BEAUTIFULL
At the start of the stack need some help. One can only be done, but it gets better with two. The most important thing to start with is that the floor is smooth. You can find more videos of mine in which one person download handedly. Thank you very much for your comment and be sure to visit my channel. :)
Bales are stored in the field and as they are selling they are carrying. Most go for the animals, cows, sheep, ..
Algo hisieron mal, los fardos no deberian haberse desliazado en 2:58, los deberian estar sujetando las horquillas bajo estos.
They did something wrong, bales shouldn't have slid in 2:58, they should had been hold by the forks that sit under them.
No la tendrán vendida, pero al precio que está este año, supongo que venderan lo viejo tb aunque sea para camas. Un saludo Serggy97
The unload is late little. If you see the rest of my videoes you can verify it. The unload is complicated because the soil was not smooth, and one was starting constructing the battery of bales.
If the ground is level there is no problem and quickly download. If you see the rest of my videos that I have arcusin, you will find it much easier. Thank you very much for your comment.
Y sabía yo que eran españoles, esos silbidos son característicos xD
The supervisor should have told the telehandler to backed-up a bit, to allow the bale trailer to push the bail stack 'over centre' initially, -to allow for 'spring back'. They would have remained standing first time then and the other stack would not have been knocked and toppled.
When you start to do something wrong, you can not end well.
belle video !!
it took the same amount of time to unload the bales as it would have taken to load them on trailers
Gracias Miguel.
I noticed in this video what when wrong when the second load was getting lifted up I noticed that the bottom bale was hung up with the first stack
Very dangerous stacking that high without a support to lean into. If they don't fall today they will fall tomorrow. Sad to say many deaths have been caused by falling big bales.
Be very careful.
No. La empresa es española, pero los trabajadores son extranjeros. El de la gorra es que pilota el tema.
Yes, 20 bales for 120x90
Ufff tuvieron ustedes problemas con las balas... Quiza sea mejor ponerlas con uba pared de apoyo no?
La pila no se empezó como manda hacer el fabricante del Arcusin. Intentaron empezar "la casa por el tejado" y esto es lo que ocurre... Cuando las cosas se hacen mal, es muy difícil que terminen bien.
Perdona mi ignorancia, ¿cómo dice el fabricante de Arcusin que se haga? ah y gracias por tu respuesta :)
Paco Jiménez Recomienda empeza con poca altura, y sobre ella ir descargando otras más altas. Imagina la mitad de una piramide. Sobre la pared que creas, descargarías los carros completos. Siempre hay que empezar a hacerla con cargas parciales del carro, y nunca hacer lo que se ve en el vídeo.
Ah, ya entiendo... sí, es más logico
you do know the difference between a game and real life i hope.
buen video
too much pressure on tejescopic loader did not allow new load to lean back
always stack uphill if stacking down hill leave gap at bottom of new stack
start new line by putting 2 loads at right angles to previousline at start of new line
how the corner forks put up with the weight I do not know !
thank you very much.
Wouldn't it be just as simple and better to make the stacks a little shorter so you wouldn't have to spend so much time stabilizing the tall stacks?
As you say, it is what sends the manufacturer. But people ignores what the manufacturer or read the manual.
Agrosdemeter
You are so right about people not reading manufacturers manuals because i am always telling my sons about reading instructions. They often buy things that seem simple to use and discard the instructions only to look for them later because what ever they bought is not working right.
No it wouldn't
ibramlet Yes it would.
Why would it then?
The price is from € 73,000. The price is last week.
Verry good.
Like.
I totally agree.
is this 20 bails high ?
Thanks for the video, You have given me the perfect reason NOT to use this equipment.
You can see all my videos Arcusin.
This is the ONLY time there was a problem with the download. The fault is not of the machine. FAILURE IS HUMAN.
Wouldnt have one if they paud me to take it. Far to much stuffing around to unload, you have to have a spotter with you when unloading. I thought the hole idea was t save on time and man power. Yall must do it a bit different over there
Cool!
Heath superchaser is the way forward!
Das Problem, das ich habe, ist, dass der Boden nicht ganz flach. Einige verbringen eine Leine, um ihn im Stich gelassen zu. Auf diese Weise sind Downloads perfekte und es gibt keine Gefahr, Stroh-Pakete. Aber oft gibt es keine solche Einrichtung, und tun Sie es, wie Sie können. Ein Gruß.
It is dangerous if you do not do things right. It should be a wall with less height, and gradually have to increase. Another option is to the wall with a shovel and a tractor, and then download against it.
I agree, :)
SICK
I agree. You have to be crazy to ride there.
these model is in farming simulator 2013
Venir pa huesca que damos cursillos los ingleses también
The dude starting at 2.08 ruin the same amount of bales that he brought in.
The last price I got was 100,000 €. Price 2 years ago.
the ground must be eaven
Przykro mi, ale nie rozumiem. Czy mogę zadać pytanie inaczej?
the only reason it didn't work is because at 2:59 the second row of bales slipped
That's the problem.
i know that's the problem, i was pointing it out for all of the noobs on youtube
price of this trailer? :)
I thought they had some kind of CB radio until 04:01 .
Może jeszcze więcej tych KOSTEK?
jejeje
jeje
Fiiiiiiiiiiiiiiiiiiiiiiiiith! HOOOO! ! GO back! HAHA :)))) 4:14
This is not a new idea. I watched a similar stacking trailer 40 years ago fail the same way. You can't stack bales like that without them falling over.
oh...they can also pick up bundles of small square bales...but get one of the shorter stack height machines if this is your plan...small squares are not packed as dense and cannot take such a tall stack. Check out their web site...arcusin.com
AGROSDEMETER BESZELSZ MAGYARUL
köszönöm szépen az információt. Tudom. Üdvözlet Spanyolországban.
Not a one man operation like Arcusin claims......It is so much faster if you hook it behind an F-350 and run around the field at 50 mph, it's what I do in FS 2013. haha
No smoke no poke
jajaja gallegos en accion!!
Sorry, I do not understand ..
Alfons åberg
Want to know the price in €? The arcusin you can buy from € 74,000. You can visit their website.
w w w . a r c u s i n . c o m
america
It is Spain
it that a case ih magnum
mal machina, porque el material no hace como el condutor quiere.
warum rutschen die ballen beim kippen nach hinten raus? dadurch wird das eh schon nicht optimal quaderförmige und elciht deformierbare stroh nochw eiter deformiert und steht bei derartigen höhen von vornherein schon schräg. da gibt es bessere auflieger/anhänger zum quarter ballen stapeln! und die trottel zeigen hier auch noch wie schlecht ihre maschine funktioneirt. oder ist es nur ein bedienfehler vom legasteniker personal?
Wenn Sie, wenn in Deutschland verkauft meine, die Antwort ist ja.
Enough bales? Nah!!
This is way easier and faster in Farming Simulator 2013
Far to high. Asking for someone to be killed. You have all that space, why not stack them 2 or 3 less. Would be a lot easier to off load.
Very stupid of him to have climbed up there.
(Y) romanasii nostri
Too much hassle that :(
ans to meth_cooking_afghanis is steak you eat moo moo doo doo
don t be so f cking mean people always judging from the sideline...you can do it better ??? try it yourself....we are all human...so we can make all a failure...
wouter Groot Wassink še
This is just dumb!!.....
That is just dumb!!.....
It is crazy.
I'm sure NOT impressed.