You, Sir, are a Genius! And now, I Look like one....With your instruction, I just got a broken key out of the lock on my Apartment Garage door, which was left in the open position. Cuticle scissors......worked like a charm! Thank You!
Thank you so much for this video!!! My key had broke in my home door, called the locksmith. They wanted to charge me $54+ dollars to come out. couldn't afford it, so i youtube it and your video came up. I did the first one (scissors) and it came right out! YOU'RE AWESOME THANKS!!!!!!!
Sir, thank you so much for sharing this, I could not get the another half out. The Scissor worked in one try. May my Heavenly Father, bless you for this video, as he did me finding it.
Wow ! Quite helpful! I have followed your ways and I've succeeded to remove a broken key from a padlock! I was so desperate but you have helped so much! God bless you!
I see so many negative comments here. I was about to take an axe to the damn door and the scissor trick did the job. Now I have a new, working lock on the door and it cost me nothing. You, sir, are a STAR !!!!!!!!!
Using scissors with a curved and pointed end worked. Got the broken key out in a couple of minutes. Thank you so much for the tip, saved me lots of money!
Thanks for the video , I used one of those micro screwdrivers and was able to remove the broken key without removing the door lock from the door. It worked a treat!
Thanks! Instead of scissors I used a dental pick because scissors wouldn't fit. You just saved my company the price of a locksmith and gave me the pleasure of repairing it myself.
Method 1: Now try it while the cilinder is still in the door and your work area is just 180 degrees aka a flat surface. Method 2: You still need to replace your cilinder. Using a 2nd key at the other side of the cilinder will push out the broken key in most cases.
I'm not going to take the time to make a video about it, but if you take a sewing needle and break off one side of the eye, it can slide under the teeth of the key and the resulting hook will remove the key. I use a small pair of pliers to grip the needle. Obviously, size the needle to the lock.
What I use is a pick tool go in slow once the pick it’s all the way in I turn it either way to 45 degree and take it out as fast as I can and the broker key comes out
3 ways and this is the best way. Cut a thin section of a plastic straw and super glue the 1 side. Slide it in wet side against key and let it dry. Pull and key will come out attached to strip.
I use a pick, usually a single hook!!!.. Slide it down the side, twist the pick and pull.. POP, out the broken key cameos... BOOM into the grinding machine and make your customer a new key
So I'm aggravated because my key is broken in the door and that music just tripled my anxiety way up! I really wanted to see how you got the key out but I just couldn't handle that music
i am a caretaker in a big housing complex and broken keys are a daily thing....i use a bent paper clip and a pair of pliers....works every time and is quickly done
Of course BixRog! What we see in this clip is a non professional work... A pair of long nose pliers would be the solution, at the beginning, then paperclips and pliers. Still non professional, but more clean and efficient.
I have just removed the broken key from a lock very similar to this. I took it out of the door, held it with the broken key lowest and tapped the barrel gently a few hundred times. It just gradually came out due to gravity. I have to say i tried everything suggested in this vid and similar ... frustration was the only result. Just be patient, tap gently with a little hammer or similar and trust in the fact that it won't fall upwards! It will only make its way down until you can get a good grasp of it. Ah, such a relief to have it fixed.
Yeah thanks the first one sounds better than the second one. Like we really going to have a drill handy if we on the outside of the house LOL thank you
"my method" is tested in three cases and work Thermal transfer between key and lock make important role. Know practice in hard repairs is also welding nut on cutted(cracked) screw, very similiar principle.
Not only are the two methods shown stupid (scissors? Any point object?); let's drill a hole in the lock (duuuh), but the person doing them is useless as well (clumsy and unskilled). If using the pointy object, you should apply pressure on the other side as well. And you NEVER drill the lock (how dumb is that). As another commenter suggested, why not just use a key extractor, or hook. So... how are these 'brilliant' solutions? Who rates these things?
put crazy glue on finger tip and touch key nub a few seconds...pull out key remnant and then type in youtube "how to get crazy glued stuff off your body parts"
Actualy sharp needle points and exacto knifes would well to pry em out ,,,sharp edge catches brass key pretty solid! WAY better than thick friggen dull a$$ed scissors!
but my driller and scissors are behind the door with the broken key LOL
Epic
@@cretorn1 epic
9
@@cretorn1 0
LOL
First method worked a treat! Thank you!
You, Sir, are a Genius! And now, I Look like one....With your instruction, I just got a broken key out of the lock on my Apartment Garage door, which was left in the open position. Cuticle scissors......worked like a charm! Thank You!
Thank you so much for this video!!! My key had broke in my home door, called the locksmith. They wanted to charge me $54+ dollars to come out. couldn't afford it, so i youtube it and your video came up. I did the first one (scissors) and it came right out! YOU'RE AWESOME THANKS!!!!!!!
U saved my life. U saved me money and hassle too. It worked for me with the first step . Thank u so much
Sir, thank you so much for sharing this, I could not get the another half out. The Scissor worked in one try. May my Heavenly Father, bless you for this video, as he did me finding it.
Wow ! Quite helpful! I have followed your ways and I've succeeded to remove a broken key from a padlock! I was so desperate but you have helped so much! God bless you!
Scissors worked for me. Thanks my guy. Pulled it right out.
thank god the scissors worked. wishing everyone else watching this video the best of luck with their broken keys lol
I tried the scissors one, and it worked! Like I don’t have to get a new lock😂 would’ve been a pain. Thank You 👏 👏
I see so many negative comments here. I was about to take an axe to the damn door and the scissor trick did the job. Now I have a new, working lock on the door and it cost me nothing. You, sir, are a STAR !!!!!!!!!
Thank you, just had the key break off in my shed lock. Scissor technique opened it straight away. Thanks again
Thank you very much for the idea. I used a small screw driver. It worked like a charm.
Thank you! Scissors worked. Lifesaver
Using scissors with a curved and pointed end worked. Got the broken key out in a couple of minutes.
Thank you so much for the tip, saved me lots of money!
Thanks for the video , I used one of those micro screwdrivers and was able to remove the broken key without removing the door lock from the door. It worked a treat!
Great advice. I used nail scissors which had a delicate curved end.
It's work for me
Scissors actually worked... didn't think it would..... but finally after a long struggle scissors worked... phew😅
Watching the scissors method helped me out a ton! I was able to get a key out that I was really struggling with when trying to use pliers
Thanks! Instead of scissors I used a dental pick because scissors wouldn't fit. You just saved my company the price of a locksmith and gave me the pleasure of repairing it myself.
I had no luck with scissors or tweezers. My daughter suggested her cuticle trimmers. Bam. First try.
Method 1: Now try it while the cilinder is still in the door and your work area is just 180 degrees aka a flat surface.
Method 2: You still need to replace your cilinder.
Using a 2nd key at the other side of the cilinder will push out the broken key in most cases.
Used a really small, like for eye glass repair, flat head screwdriver. Worked great. Thanks!
Very helpful video. Saved my a lot of $$$$! Thanks for posting!
First you must break your key, Second you have been locked outside your home.
Mission Failed
Whew... This video saved my life..
Thank you. Drilling was the only method I could make work. Took 30 seconds.
THANK YOU for making the one video that finally showed me how to successfully get a jammed key out of my file cabinet lock-with the drill!!!!
TerraFormaStudio
super glueing the two pieces back together works sometimes too
I'm not going to take the time to make a video about it, but if you take a sewing needle and break off one side of the eye, it can slide under the teeth of the key and the resulting hook will remove the key. I use a small pair of pliers to grip the needle. Obviously, size the needle to the lock.
Thanks for this video, big help. We use the scissor to remove the half of the key.
I used my MacGyver-knife to do the same thing, it worked like a charm! Thank you!
Forget scissors/drilling just use two hardened needles and tease it out works every time
thank you 🙏. you saved me from a big family problem 😂🙏
You made my day with this video! Thank you!! I had the broken key twisted inside and using scissors I fixed the situation 😁
nouwanda1000 porte de garage à motorisé
As far as i am concerned. Thank You for the great video and information.
Its awesome and very use full in critical
thank so much for this vid
Daughter just broke key in lock and I removed it just now in seconds with my nail scissors
phew!
Scissors worked for us, too! Thank you so much for posting it for everyone. So kind!
Thank you! It worked straightaway with the scissors!!
What I use is a pick tool go in slow once the pick it’s all the way in I turn it either way to 45 degree and take it out as fast as I can and the broker key comes out
Am I the only one who finds funny a DIY video with a guy, whos "not that good" at dying? :D
Brilliant... Thank You - worked a treat and very quickly. :)
Thank you so much, this saves my day. 🙏🙏🙏
OMG ! someone please buy this guy a pair of pointy nose pliers !
get a set of miniature watch screws,mini flathead screwdrivers,they will stick into the top and pick that right out !!
Thanks for sharing your video. It took me some time, but it worked. I could not believe it.
Scissors worked. Thank you!
used a pair of scissors today(26/9/19) to remove a piece of broken key from my front door,using your technique,all I can say is thank you very much.
3 ways and this is the best way. Cut a thin section of a plastic straw and super glue the 1 side. Slide it in wet side against key and let it dry. Pull and key will come out attached to strip.
Thank you so much 🙏🏻 the scissors worked - small nail scissors 💐
Thank you for uploading this video. It worked like a charm, I used tweezers for a firm grip to pull the key out.
I use a pick, usually a single hook!!!.. Slide it down the side, twist the pick and pull.. POP, out the broken key cameos... BOOM into the grinding machine and make your customer a new key
Powerful neodymium magnet solves this problem in 2 seconds
Guido Fawkes where do I get one?
Guido Fawkes wrong keys are made of brass not steel
Neodymium magnet, I do not know how you are, in Russia they are sold at every corner, look for Ali
No just like coins, keys aren't magnetic.
Thank you. The scissors method worked for me.
Szerencsétlenkedő..... !!!! Egyszerűbb meg oldás van.
I did it with some twizers and a pin pushing the broken key from the other side, hope it helps anyone
So I'm aggravated because my key is broken in the door and that music just tripled my anxiety way up! I really wanted to see how you got the key out but I just couldn't handle that music
Life saver worked a treat with the drill :) cheers
Just did this for my Mom. Thanks! It took about 20 seconds.
omg my key is broken ........wait there is scissors in my pocket and drill in wallet thank god
Speaking as a locksmith who does a of this stuff.. Ignore this video.
pjdambra and do what instead...
Powerful explosives will usually get the key out.
This was real helpful thank you.
Worked for me. A big thank you is due and earned.
Me as a locksmith watching this, it feels like my eyes are bleeding..............
Share something then you stain rather than criticising
i am a caretaker in a big housing complex and broken keys are a daily thing....i use a bent paper clip and a pair of pliers....works every time and is quickly done
Of course BixRog! What we see in this clip is a non professional work... A pair of long nose pliers would be the solution, at the beginning, then paperclips and pliers. Still non professional, but more clean and efficient.
i use magnets
THE SCISSORS WORKED!!!!!!!!!!!!!!! THANK YOU!!!!!!!!!
This worked so easily thank you so much.
What worked for me, tiny bit of super glue on the key, stick it slowly hold for 10 secs, then gently pull it out.
I thought of that before I saw this video.
But then you still can't use the key anymore. I like the scissors technique.
@@kevinayala7358 I then got a ride to get key copied, it was my car key and my only copy lol, stuck in circle k store lot.
@@kevinayala7358 but you still can't use the broken key with the scissor technique?
I always use dental pick works like a charm
I have just removed the broken key from a lock very similar to this. I took it out of the door, held it with the broken key lowest and tapped the barrel gently a few hundred times. It just gradually came out due to gravity. I have to say i tried everything suggested in this vid and similar ... frustration was the only result. Just be patient, tap gently with a little hammer or similar and trust in the fact that it won't fall upwards! It will only make its way down until you can get a good grasp of it. Ah, such a relief to have it fixed.
thanks for the help!, the scissors part worked!
best to use old coping saw blade cut tip at a slight angle with snips works every time, point teeth toward you
Kevin Crawford v .
Kevin Crawford
Scissors works!
A big like for the video. 👍 I just got the broken key out with the scissors method although I used two eyebrow pluckers 😄
Thank you SO SO much, it worked!
just put a little tiny bit of superglue on it put it back and pull it slowly
Place the second key on the other side, it will be faster :)
Phew!! Thanks for that. Scissors option did the trick.
i just tapped the barrel on a concrete step was done in a second
I tried tweezers to no avail. Tried scissors after watching your video - it worked! Thank you!
Scissors worked for me, thanks man, my mom would have killed me lol
Once my key broke inside the hole. I took it out with a vaccum cleaner
Yeah thanks the first one sounds better than the second one. Like we really going to have a drill handy if we on the outside of the house LOL thank you
Thanks so much
I tried the scissors and 5 seconds it fixed it
I was about to call a locksmith
Thanks again
Love your absolutely filthy hands.
So my front door key broke off and my scissors and drill were in the house.
that sucks
U good now?-
Scissors worked!! Thank you :)
Your video saved me today!!! Thankyou so much🙏🥺
in most of the cases you can use a strong magnet. eg. neodium, from an old hardrive. you're welcome.
Nem Ez Most keys are made from brass you could have a magnet from a junk yard that lifts cars but won't pull that key out 😂
We all here because we got our keys stuck in our doors 😭😭😩
They make flimsy keys these days. Depends where you get itcmade
Used the scissors trick. Blessings be upon you , saved alot of money and pain ♥♥♥♥♥😘
This helped us thank you so much sir!
Ha ha ha ha ha, went to hold the lock when its already in a Vice....
Simply solder piece of wire on key and pull it... without lock damage Easier and clean way
SejnyM p
I doubt it would be simple to solder to a key in a lock... that's a big heat sink.
"my method" is tested in three cases and work
Thermal transfer between key and lock make important role. Know practice in hard repairs is also welding nut on cutted(cracked) screw, very similiar principle.
+ᓮאᗩFᒪᗩᖰ 8
Thanks! Scissors worked for me
Using a similar tool, I was able to remove the broken key, thank you.
Not only are the two methods shown stupid (scissors? Any point object?); let's drill a hole in the lock (duuuh), but the person doing them is useless as well (clumsy and unskilled). If using the pointy object, you should apply pressure on the other side as well. And you NEVER drill the lock (how dumb is that). As another commenter suggested, why not just use a key extractor, or hook. So... how are these 'brilliant' solutions? Who rates these things?
put crazy glue on finger tip and touch key nub a few seconds...pull out key remnant and then type in youtube "how to get crazy glued stuff off your body parts"
Actualy sharp needle points and exacto knifes would well to pry em out ,,,sharp edge catches brass key pretty solid! WAY better than thick friggen dull a$$ed scissors!
Doug Chaney Put it on youtube with the title How to get out broken and superglued key part!
whfghfdA,dhgbdtiunkiz see put de ft icr IP know i
في طريق اسهل بكثير فقط ادخل مفتاح صالح من الجهه الاخرى وسيخرج جزء من المفتاح المكسور من الجهه المقابله وبإمكانك ان تخرجه بكل سهوله بيدك
Thanks mate I tried the first method it worked well.
neat tricks! For option 1, you could use just about anything that was pointy, and for option 2, you could in fact use the drill bit to pull it out. :)