AV Networking - TesiraCONNECT

Biamp’s TesiraCONNECT network appliance made building a modern AV system without switch configuration easier than ever. Then, the TC-5D model introduced the ability to bridge together AVB and Dante signals, ushering in a new level of flexibility.
This training session navigates the connectivity options made possible by both these devices, demonstrating strategies to use for both media and
control traffic, either together or separately; while using a single media type or media conversion; and within a single Tesira system or when interfacing with an outside network. The ultimate goal of this session is to prepare trainees to create the most efficient design based on their specific needs. For more information please visit www.biamp.com/products
Subscribe to our channel: bit.ly/1ZP9WxA
Like us on Facebook: on. 1nAMSBq
Tweet us on Twitter: bit.ly/1JZSZt8
Follow us on LinkedIn: bit.ly/23hcuUv

[@user-pc8eh8ux2l]

In "SAMPLE TOPOLOGIES - Media Bridge Mode", for Dante system, color wire should be purple I guess.

[@KevinFlynn1967]

Adding Dante to an AVB system was not as easy as you say in the video. First you need version 3.18 or higher firmware. Just that sentence would have saved me 3 hours. Once I figured out I had to check the AVB enable under network settings I was actually able to see the TC-5D in the Equipment Table \0/ . Now I get the following fault from the TC-5D Server device (TesiraForte01234567) not found. And I haven't even started with the Dante software. Far from a "new level of flexibility" new level of frustration maybe.