You Can Turn These Plastic Beads Into ANYHTHING
ฝัง
- เผยแพร่เมื่อ 29 เม.ย. 2022
- Head to getsunday.com/tylertube to check out sunday and get 20% off Smart Lawn Plans! #sundaypartner #sunday #lawncare
MERCH - gascanco.com/collections/tyle...
Twitch - / tyler_tube
Gaming channel - @TylerTubetoo
follow me on instagram: @therealtylertube
join the discord: / discord
editor, harrison : / harrisando
My equipment
Main camera : amzn.to/3jKCl6g
second camera amzn.to/2TE0KMt
third camera : amzn.to/2Nt9mlC
The mic i use : amzn.to/2BZrAcO
The tripod i use : amzn.to/2LuaGCF - บันเทิง
![[LIVE] : ONE ลุมพินี 69 | คู่เอก "กุหลาบดำ vs นาบิล"](http://i.ytimg.com/vi/PNM6U8e_HMo/mqdefault.jpg)
I picked up that Raw-Toast shirt and its awesome! Shipped so quick and get a lot of good laughs!
thank you for the support!
Nice bit of merch!
It's not toast! It's twice-cooked bread!
We call it squishy toast here in canaderp. I prefer toast on a nice egg salad sandwich, but "raw" or in canuky "squishy" toast as a nice buttered up snack. those people that go full crouton toast (with out using it as crouton) are not human. Even if you go 3/16th" thick butter slices on it. But I guess theres reasons for it all.........
@@realrandom7666 "Canaderp" 😄
Make a shield out of it. See how bullet and arrow resistant it is.
now thats tyler tube content
Tyler hasn't shot anything in a while... good idea.
I’m gonna go out on a limb and say plastic is not bullet proof. Arrow proof probably
Depending on how dense the plastic is, you'd be surprised at how effective plastic CAN be at stopping bullets. Not saying it will stop a .50 BMG but maybe a 9mm or 10mm, which would be impressive if it can.
Make a arrow out of it
Tyler is one of the few people I know who is both smart and dumb simultaneously 😂
love your content!! Side Note: You have a Gadco garage door, they no longer manufacture and your top section is coming apart... get yourself a strut and self taper it to the very top to save it so you dont have to buy a new door :) Just a suggestion from a fellow garage door tech :D
Lol it’s so interesting seeing someone comment about something they see in the video that they’re familiar with and work with daily. It’s cool to see how people can view videos completely differently. Because I never even notice his garage door.
@@shyPandemonium haha now that they said it I saw it too lmao but I do this in videos randomly idk I notice weird details
Make a pipe with it, capped on one end with a valve on the other and see how much psi it can hold
I like the way you think
That's the show we want to see. Boom cap flies off mach 2.
Sooooo make a bomb?
@@keirakain yea for real, that could be really dangerous, 100 psi of any fluid touching you and your gonna need surgery most likely
I got a better idea make a pipe with it and a bowl and see how much crack you can smoke before the cops come
i think leaving a little cube or other shapes of this stuff in various liquids like your other "leaving [thing] in [liquid] for 30 days" videos could be interesting to see what can eat away at this stuff or weaken its structure or just generally seeing the changes
This is a great idea.
It stains stupidly easy, so leaving it in pickle juice would definitely turn it green that's for sure.
@@biddlybingdebong8959 That is more so if it has starch in it. Otherwise, this is fairly resistant to anything that I feel it would be safe for Tyler to handle... the man who can't hammer straight and keeps breaking things, lol. ;)
I’m grammar police put a comma behind the quotation marks on leaving
Yes!
So back when I worked in a haunted house we used these things to put in our vampire fangs. Basically the thermoplast was crammed into the fang and then we held it against our teeth to make a perfect fitting denture. Also these are the same types of plastic used to make football helmets.
A fellow Haunter what's up brother damn I wish we would have known about them back in the day and me and my best friend were actually the one who created most of the props don't know how we missed it but as soon as I found them I haven't put them down yet I don't leave the house without a couple of random shapes of the stuff in my pocket I mean you know not going to carry a bunch of little beads around but a nice skinny flat rectangle or five and a small cigarette torch and even repair about anything
@@bullet1488666 the new duct tape haha
my mind literally raced at the ideas. i was thinking i could just jam a little in a screw but i might not have on hand since there are so many of those damn things and it seems like no matter the amount of kits i get, theres another device somewhere with something i dont have
I played around with this stuff ages back. Yes, it makes fantastic repairs or custom/ad-hoc grips for tools. There is absolutely nothing more ergonomic.
It's even quite easy to impregnate cloth/mesh with it which is probably my plan for upgrading the camping kit. A mesh reinforced stable plastic roll? Could repair anything or even be used as a cast/splint if you had enough of it.
The only problem is you can't leave anything you make with it in the car in the summer. I had a knife handle melt and irreversibly integrate itself into the fabric of the rear seat.
Yep, it's a double-edged sword. Its biggest strength also means this really works best in cold climates, since there's little risk of unintended "applications" on a hot summer day.
Pov. your looking at the bag of plastic beads slowly move towards the end of the table as he hits the ball with the hammer
I'd like to see a knife or hatchet blade made from this stuff an see how effective it'd be.. thinking more for a survial pack to make a tool you forgot or lost
i feel like that would just be the plastic knife all over again though, plastic is extremely hard to get an edge on and won’t last long if you manage a decent one
It is far too soft for that.
I like what you are thinking....but I believe the using them to make a hatchet handle if ur handle broke would be way more practical then making the hatchet head it's self
Yess
This this this
DO MORE WITH INSTA MORPH:
1. Target and shoot with crossbow.
2. Insta morph sword
3. What happens when its frozen
4. See if insta morph hardens with different liquids
I love how you bought a whole new pulley system but won't upgrade that table. Lol
Who else was watching that bag, just waiting for it to fall off the table?!! 🤣
Yesss I was so nervous!
I knew it was gonna go, it was just a matter of when, that was the exciting part LoL
I swear Tyler your such a genius with this content. Idk I’ve never come across any channels like yours. You’re dry sense of humor kills me in every video lol
Been using these for years in different brands. Most useful thing to have if you are stuck lol. Absolutly love them
I think you should make it into an armor plate and see how easy it is to cut through it with a sword, or with some arrows. Would be a fun way to test it's density/durability.
100% doing this
@@TylerTube Thank you!
@@TylerTube When you do make a plate out of this make some arrow heads to test it against itself
Let's goooooo I'm going to be looking forward to it.
Well they already have these types of products..........just learn something man, stop watching youtube
Like 15 years ago when I did special F/X makeup this kind of stuff was slowly making its way into private markets. It makes good teeth, fingernails, and horns for all you cosplayers.
I used these to mold a toe insert for my ski boots to reduce some volume in the toe box. Worked like a charm
Professional "wood sawer" that cracked me up. We love Tyler, he adds to our vocabulary. Carpenter Tyler. Keep it up, I enjoy your videos.
This would be an excellent piece of gear to put in a survival pack. It's light, does not take up much room. Can be reused, so depending on the situation you can continue to make tools you need for survival and it's very very easy to use.
I like the way you think. A video on someone surviving a few days in wilderness with just this stuff and some basics would be worth watching a mini series of.
@@CubeGodd I'd like to see a series of it with a wildly different pack each time, needing different plans based on the weird gear
Can confirm. There are lots of brands already out there. Been using it for a lot of stuff. Last project was handles for my lockpicks. Very durable even when thinned out
@@CubeGodd totally!! Would be really interesting to see vastly different environments where the survivalist has only this in their kit.
I keep some in the glovebox of the car in an insulated bag, and always take some camping. Very handy stuff.
can these make my dad come home
no
@@TylerTube damn why you do him like that
You can make a new dad with these, you don’t need the old one.
@@lordcrayzar he'll be stronger and more easily molded into what you need. 👍
@@TylerTube can you do a short update on the video just to make sure it doesn't?
In our shop I have a little hammer with an aluminum handle, one side of the head is brass and the other is plastic kind of similar to the type you're using. It's super useful for anything I need to lightly tap. Very useful to me in making fine adjustments to my machines.
this stuff has been around for YEARS (Decades)... as an ART SUPPLY. it was called Fantastic Plastic (back in the day). We used it as kids to make pins & chains (using paperclips as links).. and mold small figurines.
I've been using them in my small repair business for years. They're very handy. They're made of the same thermoplastic that many commercial products are made from so are just as strong.
No
@@gregorykrom8311 but yes
Umm, no, there are several thermoplastics and merely, also being a thermoplastic, does not magically make them all "just as strong", and no, most commercial products are not made from Polycaprolactone, where its higher cost and lower melting point are usually seen as DISadvantages that make there be no sense in selecting it.
It's really only the best for the marketed purpose, that with the low melting point it can be shaped by hand so you can... shape it by hand. Name one other commercial product made from Polycaprolactone? I mean besides the raw material sold for hobbyist/etc uses.
@@stinkycheese804 I was generalising, but commercial products made from Polycaprolactone include surgical implants, models, 3D printed stuff of course, prototypes, some bottle tops.
@@rennnnn914 that kinda seems like a list of things that are manufactured one at a time and would need an easy to work plastic. Nowhere near as many use cases as polyethylene or pvc
I love hearing the train go by. When I was a child we lived in the country close to train tracks. The sound brought back great memories!
So far it looks like this should be a useful addition to anyone's camping bag.
Another thought was it seems well suited for making an improved splint or cast if you couldn't get to medical services while camping within a couple of days..... Overall looks like a very ingenious product that could find uses in anyone's garage/workshop.
just wrap the injury in something first to prevent burns but yeah.
Maybe you should just be more careful camping instead of carrying the extra weight? If you can't be that careful, don't camp two days out. It's pretty simple. Otherwise how is it especially ingenious to merely recognize that there are a few thermoplastics that melt within the boiling point of water?
However, if you want something for your stated purpose, it would be a lot handier to take epoxy with you, then to make your cast you just take cloth, cut it into strips, wrap around the needed area and coat it with the epoxy, sort of like laying fiberglass. No need then, for an injured person or anyone else, to have to fool around with having a pot, water, making a fire, waiting for it to heat up, instead of simply mixing some epoxy together and waiting 5 minutes for it to set.
@@stinkycheese804 this guy has never had an accident I guess
@@stinkycheese804 last I checked being careful doesn't prevent a bear from eating your face.
@@stinkycheese804 I imagine a person could reasonably chose to bring both and use this plastic to create a belt buckle, buttons, etc. so that it's not using up extra weight/space. It could be used in situations where two things need to be connected but not directly joined by creating a pair of linked rings and anchoring them on whatever you're connecting. You could achieve similar results with other materials/methods but this one allows for a little more control if a specific shape/function is desired and repairs only require creating a fire instead of using up the limited amount of epoxy someone can bring.
I could see this being super useful in a hiking/camping/survival bag. Generally infinite tool in a very convenient bag
Great video& demonstration. Thanks!
Tyler should make an electric hammer with that
@lee livingstone we know what the girls could make out of this
@lee livingstone dil-
@@fizzy4050 yes very big dil
@@mko7904 do
You should’ve compared the Love Hammer with the plastic one.
😂
Ha ha lolzzz
Seeing these made into a wrench or ratchet set would be a cool idea
That’s awesome you’re sponsored by SUNDAY!
I saw a commercial for them and I think it’s cool.
Everyone we need to get Tyler a proper workbench
He can make one with the plastic
He should make one out of this stuff.
And some safety glasses! all it takes is 1 mistake and its lights out.
A wood table isn't a workbench??? 😂
Indeed, I suspect the saw would have been much more stable to saw with used on a workbench.
Id like to see if you could make a lawn mower blade ,can it be sharpened to cut grass and take the forces of being run at high rpms.
Then you need another way to spend your time because that would be a silly waste of time and not work well at all.
@@stinkycheese804 dude youve gotta be trolling right? Have you not seen any of tylers other videos? He has one literally just sharpening a plastic butter knife
It couldn’t handle the heat from the friction or the engine.
@@stinkycheese804 you know what a weedwhacker is right? It's the same concept but plastic string instead of a blade lol
The serial killer vibe in that garage is intense, from the headless and tattered human torso to the chain and pulley system and all the writing on the walls :o
That stuff is super cool. Especially since you can reuse it. That awesome
Try forming it over some Bolts/nuts and see what kind of TQ numbers you can get out of them as socket wrenches and such.
I have done this and it does work. 😂
Or a way to form it for a stripped head on a bolt
Why? The torque #'s would be lower than tapping threads into any harder material. It would just prove what is already obvious, that low melting point plastics are a poor choice for that.
@@stinkycheese804 you must be new here
@@stinkycheese804 why? Have you seen Tyler’s videos? It’s because we want to see it, we don’t give a shit if it’s better or not
Do a type of jar video! Put 5 foods inside the molded plastic! See how well the food keeps, and how easy it is to get to the food in an emergency situation.
This would be vary interesting. But I would begin to worry about contamination from the plastic if this was considered as a real life application . I also don’t know what I’m talking about. But great idea to see none the less
Definitely want to see more! I'm gunna buy me some and mess around with it lol
loved the handsaw grip toss, quality 100% 😂
The man gives no effs about his fingers hammering like that. Had me on the edge of my seat lol.
I couldn’t help but notice that a lot of the bead items looked adult themed
15:20
Lol
Definitely has a backup career in the Hard shaft making industry...
Imagine making one, use it as intended then hide the evidence just by boiling it once again lol.
Shhh don't say that youtube might suspend him again lol
Tyler you are very entertaining !!! Cant Look Away!!!
Could you try making a shovel or axe handle out of it? Both are usually under a lot of stress
Also my wood handles break a lot, let's see if the plastic is stronger than wood!
Welllllllll, yes you could but those products were injection molded,,,,,,,,,, so they were forced under roughly 20-30 000 PSI in a mold under hydraulic clamping force and mold that were almost perfect shapes................................... so you could never ever ever ever ever ever do this at home,,,,,,,,,,,,,,,,,, thats unless you had an injection molding machine and the ability to make a mold for it....................................... Get off youtube and get a real job you loosers. Oh wait you could its called the principle, so if you have a hyraulic press, and heat up plastic then force it into a mold thats very well machined and made, you could. not just melting it in a pot........................................................................
Try making a tow chain with it see if it's strong enough to pull a vehical
Considering how well that single link did at over 400lbs I believe that is a viable idea
i work in a plastics factory, that just looks like the material we use to make the stuff. the clear kind is used for things like those brita jars, or the thing that covers the car lights. you can really make anything out of it, you just need to heat it up so it'll melt and then mold it. obviously in a factory it's melted at over 200ºc, so it becomes liquid, which is easier for machines to inject into the mold. however, if you use boiled water, that's around 100ºc, it'll make the plastic soft enough to work like a putty, and if you're quick, you'll be able to mold it by hand before it cools down into shape. and if you make a mistake, you can just put it on another pot of boiling water and start again.
so yeah i guess one could use it as a fake tooth, you'd just need something shape the plastic to the right size and shape and then find a way to keep it in place
Neat!
Why do you need to put the plastic into ANOTHER pot to remold it?
@@tpad6 i meant it in the sense of while you're molding it, the water will have cooled down and you'll need to reboil it. not in the sense of getting a different pot of water to boil when there's a pot of water next to you
@@Ray_Vun ah got ya! Thanks! Cool story.
I was also wondering how someone could make a tooth out of it without it just falling out.
😂😂😂 Tylor and his mighty table 😂😂😂
Wow this stuff is legitimately amazing
You should try to make it into a knife and see how sharp you can make it.
Make a lawn mower blade with it!! Sharpen it and install it on a lawnmower from an old video maybe!?
Like to say the timer on the first batch was flawlessly timed to my timer when I was cooking a late night dinner.
The saw looks good. It was wobbling about because of the wobbly work bench. 😆
Yes please do more videos with this stuff its amazing how many possibilities there are!!!!!!
Totally agree - endless.
we definitely need more videos with this stuff. Amazing
I think a few bags of that for your SHTF kit. Would come in handy for preppers
i've made a couple of roll cages out of this for fpv rc cars, easy to repair with hot air gun.
also can put it in cold water to harden quicker
what I'd like to see is this stuff but turned into a knife then sharpened
That would be a fairly clueless, senseless thing to do, considering it has the opposite properties you'd want in a knife blade. Besides, a whole freakin' ready made knife from China would cost less than the beads and time to do it, lol. What is it with your obsession with knives, do they not exist in your country? Here, I'm practically tripping over them.
@@stinkycheese804 its an idea for a video calm down kiddo
@@stinkycheese804 feel better about yourself?
@@stinkycheese804 damn buddy calm down a bit it was just an idea. did u have a bad day or something?
@@stinkycheese804 buddy’s first TylerTube video. You comment on everybody’s ideas that they’re senseless when that’s what this channel is about. Trying things that seem stupid to see if they work. I haven’t seen you offer up any ideas of your own either. If I find you offering one up, I’ll be sure to tell you how stupid it is as well.
Tayler reminds me of my childhood fav show when we had to wait for a whole week to watch the new episode.
Oh hey! This reminds me of my job! i work in a plastic pipe factory and take the left-over plastic grind it up with a huge grinder and then put that into a machine called a pelletizer that heats it up, pushes it through a screen then cuts it into tiny pellets. Those then get made into more pipes! ^)^
Tyler please start posting more often I love your videos man!
The fully plastic "hammer", although way better than I expected, wouldn't replace a metal hammer but it looks like it would be a fantastic *mallet.*
I used them (not same name) 14 years ago to make a holder that was screwed up to wall for xbox 360 controller... absolutely mint
Damn that's smart
Try using it like an epoxy stick to repair things, like patching a damaged PVC/pex pipe and seeing how it holds up.
I've made knife handles for my blades, works pretty well. Overall it's a tool I'd use for daily use for repairs and just messing around.
Ooooo you've come a lot way from seeing how strong something is by using weights and concrete slabs, to a hoist system!! (Shows how long I've been watching lol)
He is still alive too!!!
you want a cookie?
He’s had the hoist system for a long time man
Not that hoist one, he even said its new..He has had the hoist system with a sledge hammer not a pulley system.
I’m no pro but I’d assume the issues you were having with the saw and hammer were because the table wasn’t sturdy. It was bouncing on the nail test and wobbling on the saw test
It's also because if you don't have a steady support, you use the back end of the saw blade and shorter strokes, not the front end. The hammer was just uncoordinated and poor planning.
This has been a long standing issue on Tyler tube. I'd like to see him put together a real work bench with a built in vice.
@@demos74dxs That is the genius of this channel, a bouncy table and a garage is all you need for a high 6 figure income. You also get all kinds of gadgets that you can write off as a business expense.
@@hcox1111 hey, he did actually do a live stream making a (slightly) better work bench. So props to Tyler. Still no built in vice though.
Baseball bat and ball, mini wrecking ball, a utility shed, screwdriver bits, a tow chain with multiple interlocking rings, also love your channel! Keep up the good work sir :D
I like to heat the metal part directly and stick it in the dry beads. It sticks to the metal a lot better and it doesn't rust so much. When you use water it traps water against the metal and it rusts pretty quick. I also found out that this type of plastic degrades in 2 years time and gets brittle as well as much stickier when melted.
Great video Tyler! I would've loved to see you use the screws that were in the saw handle with this. Can you drill through it easily to make the screw holes? I think that would be really interesting. Does it get pliable again if left in the sun or in a hot car?
Trying using it as a glue and separating it with the wooden blocks and the crane scale.
If the object you are binding is porous enough it can basically fuse the objects together. The shrinkage on cooling however isn't great for smooth things.
That may be the only youtube sponsor that I've ever actually been interested in lol
I take Thermo plastic camping. I have used it to patch a boat. I have made tent stakes and rings to attach ropes. Fixed a gun butt. And made cups and a bowl. Used for cereal.
I cant help but laugh everytime i see him use a saw of any kind to cut wood😂😂
I'm not a professional wood "sawler" lol love your videos tye you should see if you can stop a leak in a 5 gallon bucket with it
I used to work for a company that makes this stuff for industrial use it is actualy awesome stuff and is indestructible
Love the shirt buddy. I watched that video when you first posted it. 😁 Keep up the good work. 👍
welcome to tyler playing with balls
I feel like the bag falling was a group-thought experiment - I can't be the only person who wanted the bag to finally fall.
It felt like the screensaver scene in the office
I'd love to see more of this stuff maybe make some handles for a pickaxe, axe head,shovle head see if it holds up as a pry tool.
Handy stuff for quick repairs.
Make a jar out of with a lid, kind of like a cookie jar type, then you can store pickles in it
Ha
Trying making a ladder out of instamorph. I'd love to see if that would actually hold up but that would obviously be a lot of material lol.
One little chain link was able to hold 485lbs, I would imagine in small scale use you could use this to replace a broken bar, but I'm not quite sure on the feasibility on a WHOLE ladder. I guess it comes down to the thickness of the ladder as well as your body weight.
@@point-five-oh6249 Well for the ladder idea, maybe use it in concert with wood or pvc, the instamorph being the only thing supporting the parts. Specially if he drills holes in the parts to keep it stable.
@@MyAramil Yeah I could see that maybe working. Just using the instamorph plastic for support beams, or the steps on the ladder. That would probably be fine. But an entire ladder would probably cost you more in the plastic material than it would to just get some wood or a pre-constructed ladder from Lowe's/Home Depot.
I bought a pair of vampire fangs from a Halloween store 13 or 14 years ago and they came with a small pack of these. It was so you could get a perfect custom fit to your teeth and the fangs would just pop on and you couldn't tell they were fake. Cool to see it used for better uses than Halloween accessories.
Great video! You ought to read what the winch says right before the stretch you might get a higher number. I think it's really up in the 550-600lbs range. Keep up the good work!!!👍
I prefer Worbla pellets for moldable thermoplastic but these are pretty cool
You should make the hammer again but this time with a metal or rock core :0
I actually jsut brought my review out and I had made it into a dead blow hammer.
Without a doubt it's single most unappreciated and slept on product ever... They are super duper f****** awesome they are very strong get you a torch for touch ups
these suggestions are fantastic
I’d be interested to see if you could make a fish hook out of it or a arrowhead, spear point for survival.
I don't think it'd work very well... plastic doesn't hold an edge well. Although you could use this stuff to make a handle that wraps around a blade and make a spear like that. You could make fishhooks out of metal can tabs and use the plastic for the rod, then you could probably make the arrow shaft out of this stuff.
The first thing I thought was maybe you could make a deadblow hammer with that
on marring hammer looks like it would work pretty well for that.
I actually jsut brought my review out and I did exactly that lol.
This seems perfect for preppers. Or even as a survival item.
I could actually see this being really useful to make tools that are non conductive and won’t set off a metal detector or stick to an electromagnet. This would be awesome for like a custom lockpick set, or bypass devices. Great way to have tools on you in a nonpermisive environment.
hey Tyler, love yours vids and this sponsorship definitely interested me as a new home owner! i really hope that you can give us an update on how your lawn looks and reacts to it in the coming spring and summer!!!
Maybe if you molded the chain link and then threw the whole thing back in the water to make it soft and bond the ends to each other more. I think it might get that 600 pounds !!
That's a great idea, since it melts back together the bond should be stronger! Regardless I think he showed that stuff is very tough! I wonder if cooling it rapidly would make it stronger or more brittle like heat treating and quenching steel.
better consistency with the diameter wouldve helped too i think
I was thinking that when he was making it.
Looks like very useful stuff!!!
Tyler, what do you think about using this type of thing again but having a mold of the item? Squishing the beads into the shape you specifically want and chipping/sanding away at the edges so you can perfectly mold the right tool/item? Thought about that when you used the hammer. Overall super cool stuff
I’ve been using this stuff for years, it’s awesome. You can use silicone molds with it too
I would say make a ladder. Hopefully when it hardens you can add more of the softer plastic to itself otherwise idt it would be possible. Also all these make a blade and sharpen it comments are a good idea as well.
Sharpen thermodynamic plastic? That's a truly awful idea, you can't sand it, it just frays and tears and all the fibres turn to mush.
Milk bottles are made out of it, go and try to sharpen a milk bottle lid, see how far you get.
Leave things in flex seal in jars for 50 days. We need more of those videos
Stuff seems like it would be useful to keep around the house and work shop.