Good stuff, thanks for sharing. I've been a Beretta guy for 20+ years. The evolution of the 92 platform has been steady, but the LTT 92 is a giant leap forward. I bought the full size LTT and I have the compact on the way. It is an obvious improvement right out of the box. The ergonomics, the unreal DA pull...worth every penny.
The front sight is funny to me. Mine has flew off twice. Called LTT and the replaced my whole upper with a new RDO without question and zero issues so far.
I’ve been super happy with my LTT Centurion, fun shooter. After about 5K rounds I had to tighten the screws on the optic plate and my front sight does walk in the dovetail so I have to keep an eye on it to push it back to center.
LTT needs to do some QC on the front sight. Many have brought up this issue. Other minor QC such as dents and scuffs. Outside in inside the barrel and slide.
Yeah the front sights falling off was disappointing. Luckily this gun is mainly for competition and I could get away with just a red dot. If it was my carry gun, then it would definitely be an issue.
Looking forward to getting one of these and a Gray Guns 320. I have a Walther PDP that I’m gonna be shooting during the offseason. Also, I shot CO Nats at CMP this year! This was my first nationals and I used my carry gun but I had a really great time.
I'm around 15k rounds and been recently running into a lot of problems with mine. Primarily the fact that it's double firing. I checked the sear spring three times just to be sure, but it's not the sear spring. Kinda want to send it to Langdon but there's been a lot of talk about the customer service just straight out blaming the owner right off the bat.
… you really do have 12k rounds! Real rounds and not internet. I can’t tell you how many videos I’ve seen with 5 figure round counts and the finish looks news. Not calling them liars just saying though
What is the grease that Langdon Tactical recommends? I have a Beretta M9A3 with a LTT Rdo slide, LTT trigger bar, LTT hammer, and other accessories. Owned the gun for almost 4 years but I have been shooting on and off for 10+ years.
From the time I was looking, The 92x wasn't available yet. So I just went with the LTT. Which was the better option. I heard lots of people were having malfunctions with the 92x..
Hi ! Amazing gun with an amazing shooting 👍🏻💪🏻 You’ve mentioned installing CZ parts in Beretta mag , did you mean just a follower or with the spring? If with the spring, isn’t too short for 23+ 1 rounds ?
Use the follower and the spring. Heres the link. benstoegerproshop.com/cz-shadow-2-spring-and-follower-kit-for-mec-gar-17-round-magazine-by-grams-engineering/
I forgot to ask you something else, have you ever tried shok buff by Wilson Combat , I have one and for some reason the gun is not cycle reliably , I don’t know maybe because I’m using 10 pounds recoil spring 🤷🏻♂️
Good stuff, thanks for sharing. I've been a Beretta guy for 20+ years. The evolution of the 92 platform has been steady, but the LTT 92 is a giant leap forward. I bought the full size LTT and I have the compact on the way. It is an obvious improvement right out of the box. The ergonomics, the unreal DA pull...worth every penny.
Yes! This was my first DA gun ever and every time I pick up other people's DA guns. It just doesn't even compare to how good LTT is!!!
The front sight is funny to me. Mine has flew off twice. Called LTT and the replaced my whole upper with a new RDO without question and zero issues so far.
That's great of them!!
Thanks for the feedback and insight. Good stuff
I just got my first Beretta 6 days ago (Full size 92X). I absolutely love it. Just bought an 85F yesterday. Think I am gonna get some more. 🤔
I’ve been super happy with my LTT Centurion, fun shooter. After about 5K rounds I had to tighten the screws on the optic plate and my front sight does walk in the dovetail so I have to keep an eye on it to push it back to center.
Do you think it'd a sight issue or a dovetail issue, causing it to walk?
@@AWZ1287 I'm not sure, it walks to the left so it could be either.
Does it have the tall raised front sight? I’ve heard other people talk about this but it was only with the tall front sight post I believe.
@@seanmtak7573 Yes, the tall suppressor height front sight. I'll most likely remove it; it's in the way more than anything.
LTT needs to do some QC on the front sight. Many have brought up this issue. Other minor QC such as dents and scuffs. Outside in inside the barrel and slide.
Yeah the front sights falling off was disappointing. Luckily this gun is mainly for competition and I could get away with just a red dot. If it was my carry gun, then it would definitely be an issue.
The LTT 92g with red dot slide is amazing
Nice mag extension info bro
Looking forward to getting one of these and a Gray Guns 320. I have a Walther PDP that I’m gonna be shooting during the offseason. Also, I shot CO Nats at CMP this year! This was my first nationals and I used my carry gun but I had a really great time.
I'm around 15k rounds and been recently running into a lot of problems with mine. Primarily the fact that it's double firing. I checked the sear spring three times just to be sure, but it's not the sear spring. Kinda want to send it to Langdon but there's been a lot of talk about the customer service just straight out blaming the owner right off the bat.
Crush it at nationals and nice to see someone shooting something a little different….
"being able to not reload on a stage is a big advantage"
*cries in dying Production*
Truly talented shooter! Keep up the great work.
you need a wireless mic bro. Good stuff and keep it up
Turn on subtitles lol and I’m currently saving up for better audio equipment. Hopefully soon!
installed the sear spring right you mean
God I want one of these so bad
Do it! YOLO
Thanks for the Vid
… you really do have 12k rounds! Real rounds and not internet. I can’t tell you how many videos I’ve seen with 5 figure round counts and the finish looks news. Not calling them liars just saying though
What kind of grease does LTT recommend?
HI! MIL-COMM TW25B Gun Grease. And I use Lucas Extreme Duty Gun Oil
What grease did they recommend?
MIL-COMM TW25B Gun Grease
What is the grease that Langdon Tactical recommends? I have a Beretta M9A3 with a LTT Rdo slide, LTT trigger bar, LTT hammer, and other accessories. Owned the gun for almost 4 years but I have been shooting on and off for 10+ years.
Just curious, do you use a shok buff in your pistol?
Good video
You've got to get a bluetooth microphone with a foam wind sock on it.
U still got it? How does it run? Did you send it to Langdon Tactical for a retune?
What ammo did you say you shoot?
SuperVel. They are located in Henderson NV
What recoil spring do you use with the 115gr?
I found 10lbs recoil spring worked best for me and the ammo I was shooting.
What makes you choose the ltt elite over a 92x performance or defensive? Also did you get the carry bevel package?
From the time I was looking, The 92x wasn't available yet. So I just went with the LTT. Which was the better option. I heard lots of people were having malfunctions with the 92x..
Hi !
Amazing gun with an amazing shooting 👍🏻💪🏻
You’ve mentioned installing CZ parts in Beretta mag , did you mean just a follower or with the spring? If with the spring, isn’t too short for 23+ 1 rounds ?
Use the follower and the spring. Heres the link. benstoegerproshop.com/cz-shadow-2-spring-and-follower-kit-for-mec-gar-17-round-magazine-by-grams-engineering/
You'll have to trim the follower slightly so that they won't catch on last round. It's easy.
I definitely will do that I love berettas the reset
On them is on another level, and also your flying videos are amazing too 👍🏻🛫
I forgot to ask you something else, have you ever tried shok buff by Wilson Combat , I have one and for some reason the gun is not cycle reliably , I don’t know maybe because I’m using 10 pounds recoil spring 🤷🏻♂️
@@elnarsafar8903 sorry I don’t have experience with shok buff. But which gun do you have and what ammo are you shooting?
Cries in California
you can still buy an m9a1 and just send it in to ltt for the works
@@jhvghjgjkhlihli I would but honestly too expensive
Does the slide drop when you insert new magazines or do you have to use the slide release?
That should not be a feature, it is too inconsistent and unpredictable!
@@gleamtarrest6310 I think lefties will disagree.
@compositetiger oh boy!