E-ROAD BIKE CONVERSION UPDATE BRAKE SENSOR INSTALLATION & HOW TO TEST E-BIKE BRAKE LEVERS | DIY Petz
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- Support is much appreciated please click here: bit.ly/3D25NwK
How to test your Bafang E-bike Brake Levers using a multimeter. This is about an e-bike conversation using a Bafang Mid-Drive BBS02B kit with a 48 volts 750 watts motor. Road bike restoration and how to install the brake sensor for the road bike mid-drive conversion.
Materials needed in the conversion and restoration works.
Bafang BBS02B 48V 750W 68-73mm Mid Drive Conversion Kit
Sensah Igninte Brake Levers
Raceworks Brake Levers
Pasak Wheel Set for road bike
Bafang Mid-Drive E-Ebike Converstion Kit link here invle.co/clcorli
E-Bike Battery 48 Volts 16 Ah with LG Cells for 500-1000 Watts E-bike Motor link here invle.co/clcorpf
#DIYPetz #RollyPetz
![[Watch Party] RoV Pro League 2024 Winter | ( Bacon Time Vs FS )](http://i.ytimg.com/vi/lD6z1BugdZw/mqdefault.jpg)
Very inventive and helpful. Thanks!
Thank you Sir Bruno.
Very instructive, but wouldn't work with caliper brakes. How about throtle with those handlebars?
Hi Sir Dushan. What do you mean by caliper brakes? V-brakes or Disc brakes? Yes, we could install the throttle but I opted not to install it for me to make sure that I'll still be able to exercise as much. Stay safe Sir and thanks for the comment.
Sir, naa Kay kaila diha sa Talisay na maayong laki mo welding? Kay pa assemble ko rear rack 😁
Good pm Sir Andy. Wala raba Sir. Mangita lang ko...
Thanks for the video. On my setup, motor wont work if i have break lever sensor plugged it... Do you have any idea why ? I havent put the break wire in though im testing before im going too far..
Hi Sir, try to check wether of not the sensor is an open or closed ciruit usig the tester for continuity. If the circuit is closed, then the motor won't run. It only runs when it is on open circuit. Hope this helps.
Thanks and stay safe.
Sir, where did you connect the sensor wire ?.
Sir, it's connected to the same connection for the brakes Sir...
Sir, where did you buy your kit gani? I've learned it somewhere but I forgot which video :D
Sir Andy kumusta na imo ebike Sir. Actually aliba a pud Sir kay cheaper gamay compare to shopee/Lzada Sir.
@@RollyPetz na ok na ang jerky motor, pero Wala japon Ang throttle.. na daot sa pag cut and resolder sa motor cable. I was planning to purchase a new kit to replace the faulty one, but I think it's more efficient to buy a new ebike na lang 😅
@andycalope ok sir Andy. Thats why conversion kit lang ako gamit sir para kung maguba dali ra ilisan...
@@RollyPetz pwede ma share imo supplier sa conversion kit so I can narrow down my choices 😁 thanks
Sir Andy good pm Sir. Mao ni ang ako gipalitan sa rear hub motor Sir...Dala na controller and rear hub motor assy no battery lang...
www.alibaba.com/product-detail/48V-1000W-mountain-bike-kit-with_972538811.html?spm=a2756.trade-order-form-buy.0.0.4fe7YBOiYBOitB.
NCycle Supplier Sir..
ncyclebike.en.alibaba.com/?spm=a2756.trade-list-buyer.0.0.27b076e9kKC2RH&tracelog=from_orderlist_company
You installed it wrong. Those brake sensors are designed for the brake levers not the brake calipers. See th-cam.com/video/8nh1zX5l0SE/w-d-xo.html
Hi Sir, yes it was not intendedly to be installed this way but I manage to find a way to be used in my road bike conversion. There are other ways but this one works for my setup.
Hi what you would recomed>?250w-1000W ?
Hi Sir good day. With regards to the recommendation, you have to identify first the following factors:
1. The user, what is the estimated weight?
2. Where to use it? Is it for daily commute, more terrains or hill rides? or more on flat surfaces.
3, The budget.
If you have the these then this will help. Go for a higher wattage if you want to enjor more of the conversion. For me the 750W power is more than enough for the above factors for I'm only 60kgs and mostly used it for daily commutes and long rides on weekend.
Thanks for your question Sir. Hope this helps.