Thank you so much for this. So many people just shut the door when you ask for any help and this is great. What silicone do you like to use to make your freshie molds? I asked someone on TicToc and they basically told me to go away.
I hate that! Everyone learned somewhere. The silicone I use is bbamino on amazon. The 30a is stiffer and the 20a is a little softer. If you need any help let me know ❤❤
Lena I can’t thank you enough 👍 really appreciate it !!! Been looking for a video like this for a few days !! By the way on that phone holder ? You have a 3D printer print you one out 🙂 thanks again , I’ll definitely have questions
not sure how to contact you Lena but silhouette studio ? take its the designer addition ? then upgrade to business ? reason im asking my options are: 1. basic standard is free 2.basic to designer is 49.99 3. basic to designer addition plus 74.99 4. basic to business 99.99 money isnt the issue just wanna make sure i have right software :) by the way free addition doesnt giveme the option to save file as svg :( probably cause its free lol
This video is amazing, thank you .. The only issue I have is that I do not have the business addition of silhouette. Is there another program I could use?
what 3d printer do you have ive been watching your videos. tha nk you for making this video ive been searching an no one . i love to see more of your videos. also what 3d printer do you have im looking to purchase one this week..
Thank you for your video and time. This was very helpful. Do you make yours with a tab? I tried to add one but I did it wrong and it was added to the actual design.
I Have did tabs but found it does it not make it easier to get mold out and I started using air compressor woth basketball needle. Put ut down side and blow until mold pops up. I can do video on doing tab though.
Not sure if you figured it out or not but when you have everything selected and then hit the align button, you have to go over to the design and select the middle circle on the top and the side one after another to align them. Well at least that’s what worked for me
I need help. When I go to the offset panel and try to offset it it only puts a box around the whole image instead of an offset of the image... what do I do? 5:47
Hi Lena! Thank you soooo much for this video! I saw your comment regarding the tab, but can you still make a video with adding a tab, please. Thank you!
I have made and printed a file twice. Both times I made sure all spots were deleted....double and triple checked the second time I made my files. The point is, both times it printed with a hole in the housing. What am I doing? I have done 3 others and they turned out great.
It's not like a hole as in poor quality, It has a "gap" between the two rows of wording. @@lenanunn I can't figure it out. I have deleted and tried again. All blank spaces are removed on silhouette. I'm not sure how to send you a direct message or I would send a photo of what I'm speaking about.
I also first tried this on my MacBook, it didn’t give me the option to save as an svg. So I went to try on my windows just to see if I would have the same problem. I was able to save it on my windows as an svg. But now I’m not sure if it’s because of I have the business edition on my windows 🥹
@@lenanunn Question... when you go to print are you having gaps in the bottom layer. I am on pretty much every print I've designed like this and now printed :(
@@lenanunn Also here for how to add a tab! please and thank you! this is a life saver! i already have the first steps figured out just needed the tinker part so this was a HUGE help!
Thank you so much for this video!!! You are truly a blessing to me!
Thank you so much for this. So many people just shut the door when you ask for any help and this is great. What silicone do you like to use to make your freshie molds? I asked someone on TicToc and they basically told me to go away.
Yes! You can find nothing. Thank you so much for this!
I hate that! Everyone learned somewhere. The silicone I use is bbamino on amazon. The 30a is stiffer and the 20a is a little softer. If you need any help let me know ❤❤
@@lenanunn I have been making them all week! Your tutorial is perfect. I use the same silicone :)
Love that😊
I can not thank you enough. You are truly amazing for doing this video, I have been struggling so much trying to figure out how to do this!
Aw thanks. So glad I could help. I was getting shut down left and right when asking for help.
Thank you so much for the tutorials. I have been looking for these tutorial somewhere but cannot find them :C.
Thanks a bunch for taking the time to share this! This was really easy to understand. You're a great teacher! :)
Thank you so much. Glad I could help ♡
Queen! Thank you so much!
Hi, Lena. Thank you so much for make this tutorial. This was amazing and so very helpful.
You are so welcome!
Lena I can’t thank you enough 👍 really appreciate it !!! Been looking for a video like this for a few days !! By the way on that phone holder ? You have a 3D printer print you one out 🙂 thanks again , I’ll definitely have questions
Thank you 😊 . Let ne know if you need any help
@@lenanunn i appreciate that and i will thanks again !! gonna give it go first then ill get back with you.sorry for the name change lol
not sure how to contact you Lena but silhouette studio ? take its the designer addition ? then upgrade to business ? reason im asking my options are:
1. basic standard is free
2.basic to designer is 49.99
3. basic to designer addition plus 74.99
4. basic to business 99.99
money isnt the issue just wanna make sure i have right software :)
by the way free addition doesnt giveme the option to save file as svg :( probably cause its free lol
what 3d printer do you use?
Thanks so much for this amazing video
This video is amazing, thank you .. The only issue I have is that I do not have the business addition of silhouette. Is there another program I could use?
Getting the business one was cheapest option I found :(
How do we know which parts of the image is raised and which part would be sunk in if that makes sense?
what 3d printer do you have ive been watching your videos. tha nk you for making this video ive been searching an no one . i love to see more of your videos. also what 3d printer do you have im looking to purchase one this week..
Thank you for your video and time. This was very helpful. Do you make yours with a tab? I tried to add one but I did it wrong and it was added to the actual design.
I Have did tabs but found it does it not make it easier to get mold out and I started using air compressor woth basketball needle. Put ut down side and blow until mold pops up. I can do video on doing tab though.
Stellar tutorial. ❤️
Thank you ❤
Seriously THANK YOU SO SO MUCHHHH❤
Thank you
❤
I’m having trouble aligning the layers any tips on how i know they r aligned correctly?
Not sure if you figured it out or not but when you have everything selected and then hit the align button, you have to go over to the design and select the middle circle on the top and the side one after another to align them. Well at least that’s what worked for me
I need help. When I go to the offset panel and try to offset it it only puts a box around the whole image instead of an offset of the image... what do I do? 5:47
I have watched your video I just didn’t know how to remove the space in like the “O” and stuff like that thanks for you video though very helpful
Glad I could help!
Hi Lena! Thank you soooo much for this video! I saw your comment regarding the tab, but can you still make a video with adding a tab, please. Thank you!
Tab video is now posted ❤
I have made and printed a file twice. Both times I made sure all spots were deleted....double and triple checked the second time I made my files. The point is, both times it printed with a hole in the housing. What am I doing? I have done 3 others and they turned out great.
Are you making the bottom layer and mold wall a higher quality in tinker? Are the holes on edges or somewhere else?
It's not like a hole as in poor quality, It has a "gap" between the two rows of wording. @@lenanunn I can't figure it out. I have deleted and tried again. All blank spaces are removed on silhouette. I'm not sure how to send you a direct message or I would send a photo of what I'm speaking about.
@@tiffanysipe6326 Im having the same issue... but on the bottom of the mold I have gaps when I print :( Did you ever figure it out??
I’m having a hard time, I’m wondering if it’s because I have a MacBook. Would you be interested in doing a little class or one on one?
I also first tried this on my MacBook, it didn’t give me the option to save as an svg. So I went to try on my windows just to see if I would have the same problem. I was able to save it on my windows as an svg. But now I’m not sure if it’s because of I have the business edition on my windows 🥹
Can we do this on circuit design as well?
No cause Cricut doesn’t let you save svgs
No. I use my cricut for everything but this
@@EstherRomero-dx6pt I figured out a way around it to use Cricut design space :)
I'm running into an issue where my letters are going through the bottom instead of raising for some reason :(. Any tips for this?
Use the magnet feature in tinker to raise it to the top
is there any other application you can use besides siloette?
You can use inkscape but to me silhouette was so much easier and you don't have to have their machine to use the software.
@@lenanunn I downloaded silhouette, but it won't allow me to save them as svgs...
@@lenanunn Question... when you go to print are you having gaps in the bottom layer. I am on pretty much every print I've designed like this and now printed :(
do you have any idea how I can do it without getting the gaps on the bottom?
I can't upload the svg file to the silhouette 😭😭
@@GieroseRoussell to get it into silhouette or to save it from silhouette?
How do you add a tab?
Ohh I will do video for that. Totally forgot
@@lenanunnwaiting patiently for the tab video!!!!!
@@lenanunn did you figure out adding the tab?
@@lenanunn Also here for how to add a tab! please and thank you! this is a life saver! i already have the first steps figured out just needed the tinker part so this was a HUGE help!
Tab video is now posted ❤
Infected tinkercad, why am I getting an image of my details next to my whole image 16:28
@@trudyjohnson5667 can you send me an image? Find me on fb under Lena nunn
How do I Message you?
Sorry just saw this. m.me/lena95469