How to Use Cording Foot (3, 5 ,7 & 9 Hole) - Installation & Tutorial
ฝัง
- เผยแพร่เมื่อ 29 ม.ค. 2025
- #SewingMachine #PresserFoot #CordingFoot #3HoleCordingFoot #5HoleCordingFoot #7HoleCordingFoot #9HoleCordingFoot #Learn #withme
The Cording Foot Snaps onto the existing shank and presser foot holder on your machine. The guide on the top of the foot has three slots in which to place cords. To load the cords into the slots on the top of the foot, simply slide the cords in from the right. Load the left cord first, then the center cord and finally the right cord.
Playlist:
1. Presser Foot: bit.ly/2AJp769
2. Machine Maintenance: bit.ly/3dNazkm
3. Art Work Deepika Padukone Portrait: bit.ly/300x5Tf
Must Have Products:
32 Presser Foot Pack: amzn.to/3eIKDHp
Flower Presser Foot: amzn.to/386wrWl
Tailoring Kit Scale 1: amzn.to/3g3491A
Tailoring Kit scale 2: amzn.to/3eGq26E
TAiloring kit Scale 3: amzn.to/2BQneVN
VArdhman Thread: amzn.to/3i751Ed
Double Needle Set: amzn.to/3g7374M
Tip: Tie the ends of the cords together with a knot in order to keep the cords from slipping out of the back of the foot.
Any type of cord from yarn to thin braid can be used in the Cording Foot, as long as it is thin enough to easily pass through the slots on the top of the foot. The bottom of the Cording Foot has grooves which allow the cords and dense stitching to pass freely underneath.
Select a decorative stitch, with the stitch width set wide enough to cover the width of the cords.
Experiment with various types of stitches and decorative threads to create unique combinations.
Gathering Fabrics
Gathering with a cording foot
The Cording Foot can also be used to gather fabrics. Because the gathering cord is thicker than normal gathering stitches, there is less chance for the thread to break while drawing the fabric to gather it. Place a single strand of the cord into the center groove.
Secure the cord by tying a knot in the end and bringing the knot behind the presser foot. Select a narrow zig-zag stitch that is just wide enough to sew over the cord, but not sew into the cord.
Stitch the cord to the fabric. When finished, pull the cord, which will draw up (or gather) the fabric. adjust the fullness of the fabric as desired, then knot the end of the cord to secure.
Texture Fabric
Textured Fabric with a Cording Foot
Combine rows and rows of cords to create an interesting texture to embellish fabric. To expose more of the cords themselves, try using monofilament thread in the needle.
This makes the stitching almost invisible. This textured fabric has been used to embellish a napkin ring. What will you use your textured fabric for?
Make Plaid
Plaid with a Cording Foot
make a fun plaid design by sewing rows of cords across the fabric horizontally, then sewing rows of cords down the fabric vertically. Vary the width between rows and combinations of cords to add interest to your plaid design.
Combine different decorative machine stitches with different combinations of cords for unique embellishments.
The Cording Foot is mainly used to add surface embellishment to fabrics, but it has some practical uses, too. This foot has a slotted guide on the top which holds up to three separate lightweight yarns or cords. The cords are held by the foot, while you stitch them to the fabric. You can use one…two…or three holes, depending on the effect you want. You’ll have fun experimenting with different decorative stitches and combinations of cords!
In general, we recommend using the same size cording foot as the piping you’re hoping to sew. This works for most firm piping cords. However, if you’re going to be using a soft piping cord like our Cotton Braided Piping Cord (#104888), then we recommend sizing up a foot. These softer cords can get crushed by the foot, which causes your sewing to wander. A larger foot will prevent this.
For the Fabricator® Sewing Machine, we offer cording feet in three sizes: 1/8-, 1/4- and 3/16-inch. The Ultrafeed® Sewing Machines feature piping tunnels built-into their standard presser feet. The LS-1 model features a 1/4-inch piping tunnel, while the LSZ-1 model features only a 5/32-inch piping tunnel. To sew larger piping with the Ultrafeed LSZ-1, you can upgrade to the Cording Foot Set for Larger Welting (#104854), which works for piping up to 1/4-inch.
We also carry extra-large welting cords that are 1/2 inch to 1 inch in diameter. Since there aren’t cording feet large enough to feed these cords through the foot, we recommend using a roping zipper foot. This foot will let you sew close to the piping for a tight fit of the fabric around your cord.
YT link : / stitchswears. .
Insta link : / stitchandswear
fb page : / the.shanti.s. .
Linkedin: / stit. .
TikTok : @TheSewingMaster
Thank you for the detailed information. I have this presser foot but didn't know how to use. Now your video has proven extremely helpful.
Hi @Deepti,
Thank you for such wonderful words.
Here is suggested Playlist for you, It will help you learn about all 32 presser foot and complete Series for machine maintenance:
Playlist:
1. Presser Foot: bit.ly/2AJp769
2. Machine Maintenance: bit.ly/3dNazkm
3. Surprise Video For You. : bit.ly/300x5Tf
mem very useful video
थैंक्स हेमा पटेल जी
Thank u mam
Welcome Dear... 😇
A very Special Video Just for You:
1. My Art Work : bit.ly/3qQHvzc
Must Watch Playlist:
1. Presser Foot: bit.ly/2AJp769
2. Machine Maintenance: bit.ly/3dNazkm
Kya hum ye stitch ko overlap kar sakte hai kya?
Hi Srushti,
Yes you can do it. But try with wheel rotation by hand or slow speed.
Singer1408 pe calega kay?
Hi Rabeya Poly,
I am sharing the complete playlist of foot that will work with singer 1408.
Presser foot tutorial: bit.ly/2AJp769
Here is suggested Playlist for you complete Series for machine maintenance:
Playlist:
1. Machine Maintenance: bit.ly/3dNazkm
2. Surprise Video For You. : bit.ly/300x5Tf
Are you using zigzag stitch for this cording press or?
Hi Srinivasaprasad,
Yes, zig zag stitch will do the magic for cording presser foot. There are a few variation available in various machines that will work also.
A very Special Video Just for You:
1. My Art Work : bit.ly/3qQHvzc
Must Watch Playlist:
1. Presser Foot: bit.ly/2AJp769
2. Machine Maintenance: bit.ly/3dNazkm
Aawwwsssoommeee 💝
Thank you dear
Which foot is there in 11 pieces set
Hi Anima,
Please check the link it has all the information you asked for.
Link: amzn.to/3zg5s9J
A very Special Video Just for You:
1. My Art Work : bit.ly/3qQHvzc
Must Watch Playlist:
1. Presser Foot: bit.ly/2AJp769
2. Machine Maintenance: bit.ly/3dNazkm
Very informative video mam.. thread kaun sa use kr skte h is foot k liye??
Hi Smriti Verma,
Thank you for such wonderful words.
Coming to your query, Anchor thread, crotia thread, embroidery thread and normal thread in bobbin and machine.
Here is suggested Playlist for you, It will help you learn about all 32 presser foot and complete Series for machine maintenance:
Playlist:
1. Presser Foot: bit.ly/2AJp769
2. Machine Maintenance: bit.ly/3dNazkm
3. Surprise Video For You. : th-cam.com/video/y3Xte-E5N1Q/w-d-xo.html
What about settings?
Hi Raja Nidheeswar,
No special setting is required. Just keep note that thread should not gather, so keep note of the thread tension that works best for your machine.
A very Special Video Just for You:
1. My Art Work : bit.ly/3qQHvzc
Must Watch Playlist:
1. Presser Foot: bit.ly/2AJp769
2. Machine Maintenance: bit.ly/3dNazkm
Please send me a list of different presser foot with price and how to order. Pl send me a mail. Thank you so much
Buying links:
11 Piece Set @549: amzn.to/3nMOad8
32 Piece Set @1499: amzn.to/2RsXDKI
62 Piece Set @2250: amzn.to/3nKsoH3
A very Special Video Just for You:
1. My Art Work : bit.ly/3qQHvzc
Must Watch Playlist:
1. 32 Presser Foot Tutorial : bit.ly/2AJp769
2. Machine Maintenance: bit.ly/3dNazkm
Kameez pe lagake dekhaye
Hi Hajera Rahman,
Kameez related project next month aayega usme ise jarur include karenge. Thanks for suggestion.
Here is suggested Playlist for you, It will help you learn about all 32 presser foot and complete Series for machine maintenance:
Playlist:
1. Presser Foot: bit.ly/2AJp769
2. Machine Maintenance: bit.ly/3dNazkm
3. Surprise Video For You. : bit.ly/300x5Tf