What I don't get is how he can look at that and deem it fit for human consumption. You'd be embarrassed to show that to your children, never mind release it into the wild for the world to take the piss out of. There must be zero self-awareness going on in his head.
Yeah I'm a bit speechless at this. For years he's been trying to build a 'professional' channel with sponsorship and the works. He's either given up and is just creaming the views he can, or he's on the verge of a mental breakdown and is oblivious to what he's churning out (and I don't mean that taking the piss). That old video of him building the belly pan was when he was ok to watch. Nothing special, just a guy bodging in his garage and filming it for the fun of it. He was enjoying the builds and not being something he wasn't. He's slowly turned into a sad bloke just looks like he hates what he's doing.
That would've been a perfect for composites. Bond a big piece of foam onto the tank. Shape it whatever way you like. Close the foam with micro. A few layers of glass or carbon, and then you can paint it and/or do something interesting with vinyl. No metal, no welds, a lot more freedom with its shape, lighter (not that it matters here), overall a simpler way, and perhaps faster as well (depending on the resin set time).
@@digschopper9321 Don't be too harsh on him. He did a great job last time on the HDS's tail. Beautiful clay sculpturing, spot on fibre orientation, perfect resin to fibre ratio, not a single air pocket in sight, super lightweight. On top of that, he introduced the concept (which is now industry standard) of reusing the dust from the sanding process.
😂 the chicken strip one is a del classic, on his harley luggage box vid i commented about his chicken strips and put a link to that vid for him 😂, he deleted the comment shortly after, so i out it straight back on, its still there
I do sheet metal work everyday for a living. The chevron thing he did wasn’t the worst I have I ever seen but the tube isn’t symmetrical, his welding is awful and typical of a first time welder. Cold with to much wire. Whole thing needs going in the bin and remaking. Trick with this sort of sheet metal work is to touch it as little as possible. Going over the whole thing with a flap disc just rolls all the edges, he just doesn’t know what he’s doing
Every time I asked Matt if he would help Dell, without hesitation Matt said "YES" he would help. Dell has everything to gain and nothing to lose at this point, Dell would get 100,000 Subs from us lot overnight we would all watch his progress.
Now that’s ’Frame Grade Steel’ What a absolute fucking mess 😢 He’s spent so much time on that monstrosity that he can’t afford not to upload the vid to keep the fanboys from crying. You’re right his cult is coming to an end.
That's right up there with my favourite Delbollox fabrications. I do like the original HDS belly pan mounting though, that was bespoke to the extreme !
I posted a perfectly reasonable comment on his video. It got a load of thumbs but he deleted it. All i said was " I'm guessing that isn't exactly the look you were hoping for. Would you not just bin it and start again?" Is that how he rolls, if your comments aren't bigging him up he deletes them? How utterly sad is that?!?!
I wouldn't cut the tube to make the plate level, I'd just make the plate the right size to sit on the tubes, and be level. And there's no welding mistake that you can't fix with more weld and more grinding.
good morning, I bet her riding is his excuse for his own strips as well. He needs to keep the pace down in order not to leave her behind in a cloud of mig wore and chopped up sound waves
you don't need to make it very complicated by cutting the pipes in half and welding in between to make it flush ant tangential. You could just undersize the plate, for it to drop in between the tubes.
1. Cutting a tube in half means that your two sides have the exact same bend. 2. Filling in missing material is just a nasty way to do things. 3. Weight. Adding material for the sake of it isn't a sport, it's lazy.
It's like when you've got a job that you hate and spend every second not wanting to be there, the conscientiousness is radiation leak levels of dead. Nature of the comments are now as manipulated as you'd expect.
I am not a welder. I only stick welded a few times. Nothing fancy. Why can't he weld like everyone else, in one smooth pass? Does he need better welding equipment? Could he do a continuous weld with the welder that he has?
@@leoarc1061 Welding thin sheet metal using tacks is perfectly OK, you can do it with the most basic mig/mag or flux core welder. The equipment he has is good enough, it's the user problem.
In the old days he was going for the rat look intentionally. Now its just a part of his fabric and in his blood to make everything rat no matter his actual intentions.
Youd think that after all the years hes been doing this and all the sponsorship giving him access to bettwr tools and equipment he'd get better rather than worse 🤦🏻♂️
You can't laugh at that, it's the metal equivalent of a child who had a massive debilitating stroke at age 15. And Del had to publish it. He had time and effort sunk into it, and it needs to feed 3 weeks worth of views. Hiding the results of the welding was not only near-impossible, but it would have meant sacrificing an episode. As it is, he should have sacrificed 4.
07:27 The only organic things that come to mind looking at that piece it's a Tumor or Gangrene. This is beyond a joke. He could spend 1 hour on the toilet; show the results of his efforts and people would still comment on the amazing skills, camera work, texture and craftsmanship.
Del is, most definitely, the Pound Shop version of American Chopper🤣🤣
I just watched a documentary on here about how shite and dangerous their bikes were too, so the comparison is fair!
Lol, YES.
I'd be too embarrassed to show that to anyone.
Even by his non existant standards that is absolutely fucking disgraceful
He seem to be very good at taking perfectly good stock and turning it into something fit for the recycling bin
Bad Chad would be.. Err.. Proud?
Actually I think this makes Bad Chad look good..
The pigs ear comment has been deleted lol
What I don't get is how he can look at that and deem it fit for human consumption. You'd be embarrassed to show that to your children, never mind release it into the wild for the world to take the piss out of. There must be zero self-awareness going on in his head.
Yeah I'm a bit speechless at this. For years he's been trying to build a 'professional' channel with sponsorship and the works. He's either given up and is just creaming the views he can, or he's on the verge of a mental breakdown and is oblivious to what he's churning out (and I don't mean that taking the piss). That old video of him building the belly pan was when he was ok to watch. Nothing special, just a guy bodging in his garage and filming it for the fun of it. He was enjoying the builds and not being something he wasn't. He's slowly turned into a sad bloke just looks like he hates what he's doing.
@@noggintubePerhaps he saw a professionals work, and it let his air out.
That would've been a perfect for composites.
Bond a big piece of foam onto the tank. Shape it whatever way you like. Close the foam with micro. A few layers of glass or carbon, and then you can paint it and/or do something interesting with vinyl.
No metal, no welds, a lot more freedom with its shape, lighter (not that it matters here), overall a simpler way, and perhaps faster as well (depending on the resin set time).
Agreed, but imagine Dell with resin... It would be on the floor , walls, Dell .. then imagine him getting the foam symmetrical.
@@digschopper9321 Don't be too harsh on him. He did a great job last time on the HDS's tail. Beautiful clay sculpturing, spot on fibre orientation, perfect resin to fibre ratio, not a single air pocket in sight, super lightweight. On top of that, he introduced the concept (which is now industry standard) of reusing the dust from the sanding process.
😂 the chicken strip one is a del classic, on his harley luggage box vid i commented about his chicken strips and put a link to that vid for him 😂, he deleted the comment shortly after, so i out it straight back on, its still there
Excellent surrealist piece.
Matt, if you start replicating his fabrications, but do it properly, it will be devastating.
He did, with a Harley carb/air filter mount.
Perfect Beef. Rotten, spoiled, filled with maggots burnt to a coal Beef
I've never heard Matt speechless before.
And by definition...you never will
Deep! @@thediddly
It appears there are no critical or even questioning comments on his video now
Your reaction to jedi telling you his first name is hilarious
You can definitely see where Craig gets his inspiration.Well done Del.
When he fucks up and doesn't waffle at the end of his video instead of playing bird sounds he should play the sound of crickets.
Del,s Patent Scrotum Slicer [pending]
I do sheet metal work everyday for a living. The chevron thing he did wasn’t the worst I have I ever seen but the tube isn’t symmetrical, his welding is awful and typical of a first time welder. Cold with to much wire. Whole thing needs going in the bin and remaking.
Trick with this sort of sheet metal work is to touch it as little as possible. Going over the whole thing with a flap disc just rolls all the edges, he just doesn’t know what he’s doing
Every time I asked Matt if he would help Dell, without hesitation Matt said "YES" he would help.
Dell has everything to gain and nothing to lose at this point, Dell would get 100,000 Subs from us lot overnight we would all watch his progress.
Now that’s ’Frame Grade Steel’
What a absolute fucking mess 😢
He’s spent so much time on that monstrosity that he can’t afford not to upload the vid to keep the fanboys from crying.
You’re right his cult is coming to an end.
That's right up there with my favourite Delbollox fabrications. I do like the original HDS belly pan mounting though, that was bespoke to the extreme !
Are you sure Del is just a long time parody channel and he's never broken character? Like the mashall arts guy or the handyman Red Green.
I could see del at possum lodge.
One of a kind, thank fuck
There's 30 comments now, and 465 likes.
Halfords near him wont have any tough black or filler in stock for a while!
8am and the comment you highlighted has already been Del-eted
I posted a perfectly reasonable comment on his video. It got a load of thumbs but he deleted it. All i said was " I'm guessing that isn't exactly the look you were hoping for. Would you not just bin it and start again?"
Is that how he rolls, if your comments aren't bigging him up he deletes them? How utterly sad is that?!?!
Yes dude, you'll be lucky that you haven't been banned from the channel.
@@dirtygarageguyWe seem to have a difference of opinion on the definition of 'lucky'.
Watching dels vids makes it feel like Christmas morning, You never know what shit you are going to get next.
Looked like a metal sock.
@36 min, he didnt even cut the sheet metal into the shape of the pipes
Christ I’ve seen more symmetrical looking Ginsters pasty!
1:22:40 Andrei from MotoControl did a reaction video based on this dels video as well. Its called: Chicken Strips | How to Get Rid of Them
I wouldn't cut the tube to make the plate level, I'd just make the plate the right size to sit on the tubes, and be level.
And there's no welding mistake that you can't fix with more weld and more grinding.
This isn't true.
@@dirtygarageguy It's proven true for every crap weld I've done.
Please please PLEASE go to 9:09 on Del's Part 2 video.....this sums it ALL up. 😂😂😂
Wait, he did the chicken strip video on penny's bike? Is he ashamed of her riding?
Yes, but I'd for safety. It's sp we don't see his. Just throwing her under the bud lol
good morning, I bet her riding is his excuse for his own strips as well. He needs to keep the pace down in order not to leave her behind in a cloud of mig wore and chopped up sound waves
He prob took the grinder to the tyre.
He is welding to execution class zero
you don't need to make it very complicated by cutting the pipes in half and welding in between to make it flush ant tangential. You could just undersize the plate, for it to drop in between the tubes.
1. Cutting a tube in half means that your two sides have the exact same bend.
2. Filling in missing material is just a nasty way to do things.
3. Weight. Adding material for the sake of it isn't a sport, it's lazy.
he must see as though its in the hall f mirrors in a fair ground
Looks a bit like number 7 (flying serpent) from Raised by Wolves.
His eyes must actually be awful. He's always got that bright light directly on the job.
Surely that's the only reasonable explanation...
Craig would of made it look better that factory
Dels world must be coming to an end
It's like when you've got a job that you hate and spend every second not wanting to be there, the conscientiousness is radiation leak levels of dead.
Nature of the comments are now as manipulated as you'd expect.
Another one for the rafters?
Like a machine😂
I am not a welder. I only stick welded a few times. Nothing fancy.
Why can't he weld like everyone else, in one smooth pass? Does he need better welding equipment? Could he do a continuous weld with the welder that he has?
To much heat, but he should tack a couple of inches apart then keep lapping until done, that's my understanding (not a welder either)
Not on a 1mm
@@Marine475 So, in short, he doesn't have an adequate welding machine. Very weird given that he's been doing this forever.
@@leoarc1061 Welding thin sheet metal using tacks is perfectly OK, you can do it with the most basic mig/mag or flux core welder. The equipment he has is good enough, it's the user problem.
8:35 even the chevrons aren't the same :(
Yup that comment saying it looks like shit, gone!!
In the old days he was going for the rat look intentionally. Now its just a part of his fabric and in his blood to make everything rat no matter his actual intentions.
Youd think that after all the years hes been doing this and all the sponsorship giving him access to bettwr tools and equipment he'd get better rather than worse 🤦🏻♂️
I don't know what the problem is, I wash my chicken strips every day.
i cant stop laughing oh my
23:28 The tank. There's a weld seam down the middle of the tank.
No there isn't. YEs the tank is two pieces, and they're seam welded together, but you can see or feel a seam. Rememeber Del said it's ugly...
@@dirtygarageguy His ugly and our ugly are not the same thing...
Devolution Del
2020 Low Rider tank.
It's a metal tank detailer!😅😅😅
Thank christ it's the end.
You can't laugh at that, it's the metal equivalent of a child who had a massive debilitating stroke at age 15.
And Del had to publish it. He had time and effort sunk into it, and it needs to feed 3 weeks worth of views. Hiding the results of the welding was not only near-impossible, but it would have meant sacrificing an episode. As it is, he should have sacrificed 4.
I feel epic
Lol so do I.
"pity the fool"
its a jackson pollock
There are a few different ways id do this,THAT isnt one of them.
How can his work go downhill 😢
Comments already deleted
Is he making another rat bike 😂😂
Oh dear!
he should have always gone down the road of reviewing cheap add on tat instead.
Pity the FOOL
DEL-ETED
Why did he make a metal sock snake 🤷🏼♂️
Told you it was awful after episode 2 but this has taken shite to a new level!
Wow, nato grade science made chevrons !
Btw I just checked his videos comments he deleted "pigs ear" comment...
@20 minutes, no comments Matt because everyone is speechless from the horror!
Can you not grind it off?
I'm going to comment really positive messages on his channel just to annoy you.
Edit: I did it. lol
Although this looks like a pile of poo, Del once again deleted comments.
Lard on the road …….. pennys taken a tumble 🤣😂🤣😂
07:27 The only organic things that come to mind looking at that piece it's a Tumor or Gangrene.
This is beyond a joke. He could spend 1 hour on the toilet; show the results of his efforts and people would still comment on the amazing skills, camera work, texture and craftsmanship.
My adventure bike will shit itself with all that lard on the road lol
The pigs ear comment Deleted among others.
Tyres great for summer time use, all the time. YES Del
Thought I was bad?? Why didnt he use rod/bar instead of pipe?
Everything is a rush.
Such a shame. When Del first started I think he was better?
FIRST
Unfortunately, Delboys Garage has become a sad parody of itself, as Mat says it's sad to see.
Mad Max project bike?