I ended up doing this. The 2 bolts far under were really hard to do though. My hands barely fit back there and had to do some balancing and gymnastics to pull it off all while bits of debres were falling into my eyes... but it's done.
Thank you for sharing your knowledge. This was super helpful. I found tiny little clamping U-bolts at Lowe’s that were the perfect fit. I didn’t need as many washers, though. I also sprayed some rust inhibitor on the bolts. It’s been a week and the shield is still on tightly. Thanks, again.
Got this done today. Over tightened the first attempt on the ubolt and it cracked! Good thing i had 2 extras to use as they come in a 3 pack. All i used was 3 1/2" and a 5/16 m8 and i was good to go. She shouldn't be rattling any longer.
Don’t WATCH OTHER VIDS AND FOLLOW THIS, they rust and the problem becomes 10x the rattle..the clams rust and you can’t get them off to “fix” it..your just cobbling a job..this is not a good choice
This heat shield fell off my daughter's 2015 Wrangler this week. This looks like a great solution that i will need to do this weekend.
I ended up doing this. The 2 bolts far under were really hard to do though. My hands barely fit back there and had to do some balancing and gymnastics to pull it off all while bits of debres were falling into my eyes... but it's done.
Thank you for sharing your knowledge. This was super helpful. I found tiny little clamping U-bolts at Lowe’s that were the perfect fit. I didn’t need as many washers, though. I also sprayed some rust inhibitor on the bolts. It’s been a week and the shield is still on tightly. Thanks, again.
Definitely the best fix I've seen here on youtube, will be giving this a shot later today.
Got this done today. Over tightened the first attempt on the ubolt and it cracked! Good thing i had 2 extras to use as they come in a 3 pack. All i used was 3 1/2" and a 5/16 m8 and i was good to go. She shouldn't be rattling any longer.
This is absolutely brilliant! Thank you so much for this genius fix to an issue that has been driving me nuts!!!
Worked like a Charm! Thank You!!!
Evan Kaleb Great! Thanks for watching.
Thank you Kevin! Great fix! Quick to the point video!
Perfect! Worked like a charm. Thank you for the help.
Thank you. Its holding well!!
Looks right
did you have to remove the muffler to get to it?
Did not have to remove the muffler.
Thank you!
This is the way.
Is the rattle this makes at low speed over minor bumps?
Could be. Also could be the exhaust mounts failing. This will likely cause a rattle on ignition as well.
@@bosox2587 I've thought about that too
Removed mine yesterday at Muffler shop - shoulda watched vids.
I took mine to the auto shop and they said I didn’t need it and threw it away 😢
You don't really need it but it does help a little bit sometimes
better not lose that on the highway
Probably won't happen, mine wasn't attached at all and I really had to bend this shield to get it out.
Don’t WATCH OTHER VIDS AND FOLLOW THIS, they rust and the problem becomes 10x the rattle..the clams rust and you can’t get them off to “fix” it..your just cobbling a job..this is not a good choice