Toyota 5L rebuild part 10. head gasket
ฝัง
- เผยแพร่เมื่อ 9 ต.ค. 2020
- time to bung the head on. but the gaskets not marked top or front so a bit of savvy is needed before its squashed under the head.
theres plenty of videos on youtube where people have fitted gaskets upside down or back to front!
UPDATE: 1 year later.....that gasket was a POS. after a short while i started drinking coolant again. i thought it had to be a cracked head and was in no mood to buy a new one so we struggled on until the water consumption was too great. i took the head off to find the gasket failing between 3 and 4. 1 and 2 were not far behind.
ive fitted a multi layer steel gasket and we are good again. - ยานยนต์และพาหนะ
Good
Which best head gasket is good?
Dont use a cheap chinese 1 piece gasket! I was supplied with 1 and it failed in 1 month. Use a steel multi layer gasket 1.8mm thick. Put a thin layer of sealant on each side to ensure it seals on the water passageways.
I used 3 bond sealer, rtv will work or whatever you can source in your location.