I would give you 3 thumbs up if I could. I always look to what other embroiderers use when they embroider to know what needle size to use, because I had no clue.
I just started embroidery lqst month and I didn't know how to choose the right needle size and i always hear that sound in 4:48 😭😭 I thought it was satisfying so i didn't really mind it😢
Thank You Sarah for all this great information about needles. I grew up watching the women in my family embroider. I never knew that there were different sizes of needles and when to use different sizes. now I know why my thread will seem to drag through the fabric. Thank you again for sharing this information with us.
Hi Sarah, - from Williamsburg, VA I discovered your videos on embroidery last week. I have found them all so helpful. I love your teaching. It is an in-depth class, not only a demo on how to do certain stitches. I watched your video where you introduced yourself. It was wonderful. I loved all of it. My husband and I lived in Gerrard Cross for 5 years as part of his work for our government. We loved England. I am a quilter and have made a memory quilt for a friend. I wanted to hand embroider a corner label. Once I had settled on the design, I needed to learn more about how to approach the project and then embroider it. You were my answer. I am half way done with the label. It looks great thanks to you!!!!! Maybe I can take up embroidery now that I have discovered your excellent videos. THANK YOU!
Thank you Sarah. My favourite tip is to listen for the sound the thread makes going through the fabric to determine if your needle is too small. I learned that from a previous video you made and now pay close attention to listening to my thread. 🙂
Thank you! I started embroidering about a month ago and was using a size 9 needle with my 3 strands of DMC floss and couldn't figure out if it was right or not. Now not only do I know exactly what size needle works well with 3 strands of DMC, I'll know how to adapt it if I'm using less, or more strands. Very helpful video and clear explanations 🙂
Thank you so much for sharing your knowledge! This information, is very helpful, and, makes a difference not only in our results, but also in our confidence
I had no idea the complexity of choosing a needle. I always picked the one that felt good in my hand lol. Now I know better. Thank you for sharing your expertise.
This is a great informative video now I have a problem I've just purchased a black linen as I wanted to do flowers onto it but do you have any ideas plz
I'm in the process of making some pin cushions. Would you tell me what the best filling should be to care for my needles? I enjoy all of your posts and learn so much from them.
These needle videos have been very helpful. One thing I'm wondering about is the fabric. I know you work more on linen, but I have a piece of aida where the grain is off. Half of the fabric is straight, but when I put a ruler up to it and line it up with the holes in the fabric, I can see where the line starts to curve up. I've watched videos on regular fabric and how to get the grain correct, but haven't seen anything on how to fix it on aida. I don't know if it can be fixed. I hope I made sense. Thanks for the video.
I am using 2 Versatile Table Clamps. I have a video about them here th-cam.com/video/ElcnWWixmJ8/w-d-xo.html and I sell them on my website here www.sarahhomfray.com/myshop/prod_4538062-Versatile-table-clamp.html I use 2 clamps for filming to ensure the embroidery doesn't wobble too much under the camera but ordinarily just 1 is good enough. If you're interested in buying one please check the item description and your table to ensure the clamp will fit properly.
That was great thank you Sarah. Is it the ideal thing to aim to use the smallest size needle possible for a project ?. I had an incident recently where I was using 1 Strand of appletons crewel wool in a number 7 embroidery needle on linen twill, which according to everywhere I checked was supposed to be the correct size to use in that situation, even according to the Royal School of Needlework book. However the thread was dragging through the twill really badly, and I was as you perfectly described, "fighting" with it, but because that was "supposed" to work I miserably ploughed on, but the stitching looks a bit rough as well so I'm wondering what I was doing wrong?, and if I had gone for a larger size needle or even a chenille needle, would that have sacrificed neatness?, thank you
Thanks! This level of detail is SO helpful. Knowing the why behind the what makes all the difference!
Thank you for your support Ms Melabee, it's appreciated! x
This really helps. I had no rhyme or reason for what needle I used. Now I know better
Yes me too! Haha always something useful to learn
Thanks!
I would give you 3 thumbs up if I could. I always look to what other embroiderers use when they embroider to know what needle size to use, because I had no clue.
This was super helpful. Audio + visual = "I will remember this" 🙂
I just started embroidery lqst month and I didn't know how to choose the right needle size and i always hear that sound in 4:48 😭😭
I thought it was satisfying so i didn't really mind it😢
Thank You Sarah for all this great information about needles. I grew up watching the women in my family embroider. I never knew that there were different sizes of needles and when to use different sizes. now I know why my thread will seem to drag through the fabric. Thank you again for sharing this information with us.
Hi Sarah, - from Williamsburg, VA I discovered your videos on embroidery last week. I have found them all so helpful. I love your teaching. It is an in-depth class, not only a demo on how to do certain stitches. I watched your video where you introduced yourself. It was wonderful. I loved all of it. My husband and I lived in Gerrard Cross for 5 years as part of his work for our government. We loved England. I am a quilter and have made a memory quilt for a friend. I wanted to hand embroider a corner label. Once I had settled on the design, I needed to learn more about how to approach the project and then embroider it. You were my answer. I am half way done with the label. It looks great thanks to you!!!!! Maybe I can take up embroidery now that I have discovered your excellent videos. THANK YOU!
So happy you brought this subject up. It had always boggled my mind... but not any more. Thank you!
So very helpful. Thank you 🙏
Thank you Professor Homfray
You are the best Sarah!
Thank you so much😊 I need this help. It’s so difficult to pick needles.
Thank you Sarah. My favourite tip is to listen for the sound the thread makes going through the fabric to determine if your needle is too small. I learned that from a previous video you made and now pay close attention to listening to my thread. 🙂
This video is so helpful 😊
Thank you. Fascinating!
This is exactly what I wanted to know. Thanks for demonstrating it so clearly. ♥️
Thank you! I started embroidering about a month ago and was using a size 9 needle with my 3 strands of DMC floss and couldn't figure out if it was right or not. Now not only do I know exactly what size needle works well with 3 strands of DMC, I'll know how to adapt it if I'm using less, or more strands. Very helpful video and clear explanations 🙂
Really, really great explanations!
Thank you, Sarah! It’s so informative and demonstrative.❤
Thank you so much for sharing your knowledge! This information, is very helpful, and, makes a difference not only in our results, but also in our confidence
As always, Sarah, you're a lifesaver, thank you 😊 ❤🎉
I had no idea the complexity of choosing a needle. I always picked the one that felt good in my hand lol. Now I know better. Thank you for sharing your expertise.
If that works for you Debbie then stick with it!
Very informative!! Love your videos.
Thank you for your wonderful advice. 😊
Thank you Sarah, I’ve learned so much from you!
I really enjoy all of your videos!!!
Thanks a million for sharing your knowledge and expertise.
As always, much thanks for clearing up my confusion. I do have favorites that work for me 🙏🏽🙋🏻♀️👍🏽Mia
This was SO helpful!! Thanks for posting!
This is a great informative video now I have a problem I've just purchased a black linen as I wanted to do flowers onto it but do you have any ideas plz
Thank you Sarah! I appreciate that you listened to requests! Where do I find a stand like yours?
Here Deb!
www.sarahhomfray.com/myshop/prod_4538062-Versatile-table-clamp.html
Thanks a lot for the info
I'm in the process of making some pin cushions. Would you tell me what the best filling should be to care for my needles? I enjoy all of your posts and learn so much from them.
A ordinary toy stuffing is fine Monique butt hink about your fabric too, not too tight a weave
Hi ..this videos really useful....I'm a beginner and doing embroider on thin lawn fabric using anchor thread, which size needle would be best? Thanks
These needle videos have been very helpful. One thing I'm wondering about is the fabric. I know you work more on linen, but I have a piece of aida where the grain is off. Half of the fabric is straight, but when I put a ruler up to it and line it up with the holes in the fabric, I can see where the line starts to curve up. I've watched videos on regular fabric and how to get the grain correct, but haven't seen anything on how to fix it on aida. I don't know if it can be fixed. I hope I made sense. Thanks for the video.
It can be pulled straight in the frame Heather or it can be blocked later if need be
I've watched videos on blocking. I don't know if you've done a tutorial on blocking or not. I would like to see how you would do it.
Sarah, what is the stand your using to hold your fabric
I am using 2 Versatile Table Clamps. I have a video about them here th-cam.com/video/ElcnWWixmJ8/w-d-xo.html and I sell them on my website here www.sarahhomfray.com/myshop/prod_4538062-Versatile-table-clamp.html
I use 2 clamps for filming to ensure the embroidery doesn't wobble too much under the camera but ordinarily just 1 is good enough.
If you're interested in buying one please check the item description and your table to ensure the clamp will fit properly.
Where do you find perlé 16? The finest I've come across is 12. Terrific video, thanks! :)
Off the internet!
Es muy interesante lo que describen????
Is it appropriate to use beeswax or thread conditioner with 6-strand cotton?
What type of frame you have?
www.sarahhomfray.com/myshop/prod_4538062-Versatile-table-clamp.html
I have been embroidering with synthetic silk but my work looks fluffy instead of flat and shiny please could you tell me why?
That was great thank you Sarah. Is it the ideal thing to aim to use the smallest size needle possible for a project ?. I had an incident recently where I was using 1 Strand of appletons crewel wool in a number 7 embroidery needle on linen twill, which according to everywhere I checked was supposed to be the correct size to use in that situation, even according to the Royal School of Needlework book. However the thread was dragging through the twill really badly, and I was as you perfectly described, "fighting" with it, but because that was "supposed" to work I miserably ploughed on, but the stitching looks a bit rough as well so I'm wondering what I was doing wrong?, and if I had gone for a larger size needle or even a chenille needle, would that have sacrificed neatness?, thank you
That is the size I would use for those materials Rebecca but sometimes that wool can vary a bit so take it up to a 5 or try a chenille needle instead.
Thank you Sarah, appreciate the advice, I did think the wool was a bit off so that would explain it!
Not sure how i can put pattern onto it
Drawing a design with what?
Pueden darlo en español?????