9V battery - THANK YOU for this explanation - I wondered - should it be powered any way? If so - how ???? Manufacturer instruction manual does not mention battery neither it is indicated on the device itself......
This really helped me. I was looking to buy a current clamp for my oscilloscope and was only seeing inflated cost imported hantek and other probes on Amazon which costs as low as 10000 ₹ to as high as ₹32000₹. It looked really insane until I found this model for around 3000₹. But wasn't sure if it would work in real-time. This video helped a lot.
Hi ravi... Can u pls answer my one question pls ... I havnt baught any amp clamp yet... Can i just buy this holdpesk 605 only and use it for all automotive application like fuel pump and ingnitiion coils etc. I mean i don't hav to spend for low amp clamp? Thanks in advance
good question. It is not a good idea. This high amp clamp is good for mesure higher range current. At least it need over 10 amps to give you will a detail waveform. Because there is no amp range selector switch on this clamp to adjust the setting for capturing low amp ranges this one work only with 1mV = 1A range. Then better you go for hantek high amp clamp. It will work for you for both low and higher amp ranges.
For lower than 5 amp measurements you can use a 1 ohm resistor in series with the load in the circuit and measure voltage across resistor 1 volt = 1 amp and it works ok on oscilloscope for waveform analysis @@engeneer_ru5827
9V battery - THANK YOU for this explanation - I wondered - should it be powered any way? If so - how ???? Manufacturer instruction manual does not mention battery neither it is indicated on the device itself......
It need a 9v Battery, can put it by removing the back cover.
looks like a great value amp clamp Ravi
and good video production quality here too...sound and lighting and focus and composition all well done!
This really helped me. I was looking to buy a current clamp for my oscilloscope and was only seeing inflated cost imported hantek and other probes on Amazon which costs as low as 10000 ₹ to as high as ₹32000₹. It looked really insane until I found this model for around 3000₹. But wasn't sure if it would work in real-time. This video helped a lot.
You r from India?? Suresh Kumar ji?
@@rohithdeevi4739 Yes, and I was referring to the price on Amazon India.
@@Agni_Puthra i want some help in oscilloscope,i couldnt find anyone here,may i get your number or email??
good informative ravi. clear, detailed and short video. good..
Hi Ravi, keep forward......this information becomes a valuable source of information. thanks for your explanation.
Great thanks. I just bought my own. 👍
Brilliant Ravi, great presentation.
Very well done. Just bought one. Nice product.
Maan gaye ustaad.... U rock ravi👍
Hi ravi... Can u pls answer my one question pls ... I havnt baught any amp clamp yet... Can i just buy this holdpesk 605 only and use it for all automotive application like fuel pump and ingnitiion coils etc. I mean i don't hav to spend for low amp clamp?
Thanks in advance
good question. It is not a good idea. This high amp clamp is good for mesure higher range current. At least it need over 10 amps to give you will a detail waveform. Because there is no amp range selector switch on this clamp to adjust the setting for capturing low amp ranges this one work only with 1mV = 1A range. Then better you go for hantek high amp clamp. It will work for you for both low and higher amp ranges.
Nice video, well explained Ravi👍🏼
Thank you very informative 😊
What is the lower limit for current measurements? What is the smallest current the device sees?
This clamp is not going for low current mesurements. Good for over 5amp current mesurement. I just use for relative compression test only.
@@ravifixall Understood thanks!
For lower than 5 amp measurements you can use a 1 ohm resistor in series with the load in the circuit and measure voltage across resistor 1 volt = 1 amp and it works ok on oscilloscope for waveform analysis @@engeneer_ru5827
Buenos días buen video una buena opción el costo de esa pinza está accesible me gustaría q el vídeo se pudiera traducir👍
Hello can you tell me if the A/C function is just as good?
Sorry, i have never used it fo AC current. Just Use for Automotive DC current.
ok@@ravifixall