Extremely rusty pipe wrench perfect RESTORATION - Restore 18 inch plumbing wrench
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Hi all ,Today I'm going to show you a refurbished plumbing Rusty Pipe Wrench .
I took the tool from the scrap in backyard of my house and decided to give it a new and lustrous look.
The key to the pipe was extremely rusty, it was a real challenge to do.
His jaw was shattered, his nut was blocked.
1 First I disassembled it, using anti-rust solution, forcibly removed the screw with a hammer.
2 I removed the rust manually with a wire brush, then I put them in the vinegar, even though the tail was too big but I put it completely in the vinegar.
3 The nut was mutilated, it was necessary to put a lathe to give it shape again.
4 The screw was completely destroyed, I buy a new for it.
5 The mobile jaw was the somewhat affected, so i slightly reconditioned it.
6 I blackened the mobile jaw by simple Oil Blackening Method.
7 Paint the fixed part with orange color to give it a Pro look.
8 Fixed the dents using Maestero Putti (dent filling compound) and allow it to dry and later on sanded the extra gap or dent filling compound from it.
9 More in the video
I encourage you to leave a comment with your opinion.
Also, a like and a subscription helps me a lot and urges me to move onward .More Restorations
🔨 Antique Pipe Cutter RESTORATION | Rusty Vintage Pipe Cutter RESTORATION
• Antique Pipe Cutter RE...
🔨 Antique ANVIL Restoration | Mini German Anvil Restore
• Antique ANVIL Restorat...
🔨 Antique bubble water level - Impressive Restoration
• Antique bubble water l...
#wrench
#restoration
![จบจนได้ ! | Black Myth: Wukong #007 [ตอนจบ?]](http://i.ytimg.com/vi/DSqvWndF0sw/mqdefault.jpg)
![ว้าว!ลุงบีมแบกทองมารับขวัญหลานกันยกบ้าน [cc] แดนแพทตี้ SS2 | EP.49 |](http://i.ytimg.com/vi/Osihq1OAs-4/mqdefault.jpg)
![Old Record 24" Stilson Monkey Wrench [Restoration]](/img/n.gif)
Came for the restoration, stayed for the lathe work
ya like lathe work? ;)
I’m now ready to go buy a lathe!
I liked when he wrote "let's do some lathe work"
Thanks Buddy
Multi talented lathe! 😂
Say, I have an idea.
Let’s do some lathe work!
Theo best
I feel like this lathe has maybe seen better days.
Well it had a lot of work to do for this video...it barely survived
Nice restoration.
Thanks!
should have used a flap disc to get rid of imperfections in steel not that compound or whatever it was.
You are right
Nice way to not only restore an old tool but upgrade a lesser tool to look nice. Thanks.
Very true!
Except now, due to all the lathe work, the nut is too loose in the gap and the wrench doesn’t work as well.
Let's do some lathe work!
12:00 Let's do some lathe work.
Me : Really ? 🧐
Fantastic job looks and works well and the colour is spot on thanks for sharing and remember stay safe and make. 🍺🍺👍👍😷
Thank you! Cheers!
You omitted the blade and coil spring in the handle, plus all the lathe work on the collar but made the entire jaw adjustment loose and sloppy. May look pretty, but I doubt even the paint will hold up with plastic filler underneath. Who taught you to file with a forward/reverse motion, it works slower, and makes your file dull, forward only, lift, and repeat! Pretty shoddy!
what the hell are all those tiny bugs on the piece at 4:12????
Very Good .. My Question is : why you put only small part of wrench into the flame ? and after then which chemical you use to dip this part ? Looking forward ! thank you
Actually we put the small part and to dip into the liquid is only to harden that specific part. Rest of the tool is kept cool so to keep it flexible and soft.
Its the oil not any other thing or chemical.
You are welcome @sidkhan9871
What is a lathe? I don't know anymore!
Hello from Mexico
Hi Jonathan X
He omitted adding the two springs inside the head which are present in all stilson wrenches. They were probably not present in the original rusted out tool because they had rusted away. In the USA replacement springs are available from Zoro Tools and other places.
Yes it was by mistake... Thanks for sorting it out
Let's do some lathe work *grabs paint can*
LOL
😄😄😄😄😄😄😄😄
nice video
Thanks
Kamal Bro
Ay wallahhhhh
Looks great, but why do you keep saying “lathe work” when you don’t use a lathe? You use a bench vise.
actually it was a editing mistake, apologies...
No spring on the hook jaw? It will never work that way. Looks good otherwise.
Wow I did same one! Even same color 😍😍😍
👍👍👍
Let’s do some lathe work
you will definitely watch some lathe work in my upcoming video..
Why dont you show everything
if we show every details of the restoration process, the video length might be very long
I don’t wanna do any more lathe work 😭😭
you can fund me to buy a new one....😊 🙏
Lost me at the bondo 🤦🏼♂️
Please next try ketchup for oxidation removal
Yup will try..
Please work with a guard on your angle grinder for your own safety!
Thank You Carl N
Seriously? Bondo a pipe wrench?
Subpar
"Let's do some lathe work" too many times. Camera was also too close on most shots, and you should be wearing closed-toe shoes when working with power tools.
yeah.. repeated lathe work phrase was due to the mistake of editor of this video.checked with it what was the reason for that. He told, the file before rendering the video was crashed and upon reloading the backup of video, i missed to look up the lower third text. and yes few other mistakes related to camera work were there to be looked in the next projects. safety measures were also not properly taken...Sorry Evan Horton, you wont see these highlighted points in the next projects..
and yes thank you for your time and valuable inputs.
LAME!!!!
Why do people that make these videos think they should add music? It takes away from the calming experience of hearing the tools be restored. Automatic dislike from me, sorry