You're a fucking mad man. This must be the best low cost dyi shifter design I've ever seen. I can't wrap my head around how cheaply you could make one of these, couple it with a basically free, no name game controller and you got yourself a $20 sim racing shifter. Ima have to scavenge some free parts and make one for myself now. Brilliant project, thanks for the video!
Thanks, I think everyone can built it, coz it so simple. And if they cannot find PVC sheet, they can subtitute with other materials, like mdf, plywood, acrylic, etc.
Hello. im hopeful that you see this message. My problem is the game that I use the shifter for says that there has to be a button pressed for the vehicle to go into neutral. Is there a way I can code it so that the system will think im pressing a switch when I am actually not. If I don't get a message back ill have to figure out something else. Thanks.
I think it cannot shift more than two gears simply forward or backward. Maybe this is not a finished device and the author suggests that the viewer come up with the implementation of switching contacts. sorry for my english i use translator.
The bottom parts swivels, it also goes left and right As for the switches all you need tk do is hotglue it to the top plate so when you put it in gear it hits the button
Hi! I already have the Logitech G25 wheel & pedals, but the H-shifter's reverse don't work. And I want to make the range & splitter & engine brake for truck simulators. Is there the Arduino program for only H-shifter? Can you make me a program with 1-6 gears and reverse as well as range & splitter & engine brake on it. I'm not a programmer at all. It should include: on-off buttons to 7 for gears, 1 for range, 1 for splitter, 1 for engine brake.
bagus dan murah kalau saya pilih arduino pro micro. harganya sama dengan joystik. tapi memang butuh di program dulu. kalau yg simpel dan gak mau terlalu ribet pakai joystik aja. wiring joystik ada di tutorial bikin h shifter pakai joystik di channel ini. th-cam.com/video/VCHicPphY9g/w-d-xo.html
What were the materials you used?
- PVC sheet 5mm
- PVC sheet 3mm
- Long thread m10
- Long thread m8
- Roller Catch/ door catch
- Shift knop
- Bolt m3 and screw
ty
Thank you
@DoritosMan 150 mm for the m8 (idk about the m10)
Wow well I was trying to find a shifter with a real-life gearbox feel and this actually helped so now I can make my own...
You're a fucking mad man. This must be the best low cost dyi shifter design I've ever seen.
I can't wrap my head around how cheaply you could make one of these, couple it with a basically free, no name game controller and you got yourself a $20 sim racing shifter. Ima have to scavenge some free parts and make one for myself now.
Brilliant project, thanks for the video!
Great design, it's simple, using basic tools and parts yet seems to function perfectly. I will surely build this maybe already tomorrow.
Thanks, I think everyone can built it, coz it so simple. And if they cannot find PVC sheet, they can subtitute with other materials, like mdf, plywood, acrylic, etc.
Not bad, 95% looks and works like my DIY H-shifter.
How did you add somr spring on this shifter on your final product ?
beautiful creative and with simple tools great work buddy
Thanks bro
Are you from vietnam? That screw driver reminds me of a legendary screw driver from vietnam
no, I am from indonesia
@5:00 the ant at the top of the screen haha!
Just me who realized he disguised himself when he set the second gear?
Electrical installation link is for other video, where i can find the link or video for making the installation of the pushers?
Do you have the measurements?
Great work but is it real to do a 8 gears? (7 gears + R gear)
You can do whatever you want.. Get creative
Can u tell me what all
The items u have used
Nao consigo baixar o projeto.
Link off ? Template ?
Por favor me regalas las medidas exactas de cada pieza ? Excelente vídeo... Saludos desde Colombia
top muito bom essa caixa de troca de marcha.
Mantap hu
Good Work))
Can I get a drawing, if any?
awesome man
Mantap jiwa membahana
Aditya Pratama makasih mas. Semoga menginspirasi
Great job man )) Please tell me thread bolt how long is that ?
For the bracket 15cm long. You can download the template on the description.
@@AgaYuditraStudio Thank you buddy ))
thank you very much for your video made yourself and the igoyu in pleasure))
All nice but where is the Arduino and the other electronical things?
Can you use it in more games? Project Cars, Assetto Corsa, GRID 2, WRC ...
yes, wait for test video.
Hello. im hopeful that you see this message. My problem is the game that I use the shifter for says that there has to be a button pressed for the vehicle to go into neutral. Is there a way I can code it so that the system will think im pressing a switch when I am actually not. If I don't get a message back ill have to figure out something else. Thanks.
Hey! one question, what program do you used to make the template for print? i need to do one similar, btw awesome video, it helped me alot
Autocad. But you can use other software. Like fusion, or online software like thinkercad.
gan kalo saya pake arduino uno r3, pin berapa untuk connect ke rem tangan?
mohon pencerahan ny
wih udh mulai aja nih bkin pidionya, wkwkwk
opix ariyanto nyicil gan. Haha
need to add some springs for tension then it be great
Yes, my final project has springs for centering.
truly amazing mate
Can you make video about ıt's electronics
mas mas, itu akrilik atau apa sih. belinya online atau offline mas
Can you please name any other material instead of roller catch?
I think it cannot shift more than two gears simply forward or backward. Maybe this is not a finished device and the author suggests that the viewer come up with the implementation of switching contacts. sorry for my english i use translator.
The bottom parts swivels, it also goes left and right
As for the switches all you need tk do is hotglue it to the top plate so when you put it in gear it hits the button
Please show how you install limit switch
Can you give details of the requierments and tools?
How did you mount it to your desk? I'm planning on building one for myself
Just buy some clamps from harbor freight or something. Or if you have a 3D printer...
where are the limits switch in the video install electric on your shifter?
its so nice job
Thanks bro
What about the electronics? How do you manage to use it for racing sims?
Check on my channel, i use arduino
How thick is this part with Roller Catch'es ? ? ???
OI VOCÊ PODE DEIXA O LINK DO ESQUEMA DO CAMBIO PRA BAIXA QUERO FAZER UM
Would you share the drawings with us? And the names of each part, like that one you use to lock the bar?
Already found schematics it in your other video, thanks. But I still wanna know the name of the pieces...
roller catch
How long is the m10 rod?
Hi bro
Do you have the measurements?
It,s amazing!!!
thanks
cara melubangi thread m10 bagaimana ya bang ?
Permisi om, punya saya kan pkek arduino pro micro terus bisa digabung sama arduino leonardo kah?
Bisa kok, devicenya beda2. Yg penting gamenya support input multi device.
Hi!
I already have the Logitech G25 wheel & pedals, but the H-shifter's reverse don't work.
And I want to make the range & splitter & engine brake for truck simulators.
Is there the Arduino program for only H-shifter?
Can you make me a program with 1-6 gears and reverse as well as range & splitter & engine brake on it.
I'm not a programmer at all.
It should include: on-off buttons to 7 for gears, 1 for range, 1 for splitter, 1 for engine brake.
Mika Saari you can use arduino pro micro and use mmjoy firmware.
Next video I will make a button box use mmjoy.
Hi!
Can you put a link to your video for mmjoy?
And wiring installation diagram.
Need I the printer encoder with only h-shifter?
Is the wiring to arduino board same without pedals & wheel?
Looks like it would only function as a sequential shifter. Or I'm not seeing the other switches...
there isnt any switches on this? :) its only the shifter not the wiring or buttons ...
mas boleh saya minta template nya .. ? mau bikin saya
HI, how are this white things with rollers called?
Can i connect it to my pc?
Kenalin materialsnya satu satu mas biar jelas !
Good !!
Italo Lima thanks
What do call the wheel-clamps that hold the stick in place?
Roller Catch :)
Where can I get those rollers
👍👍👍👌👌❤️
Where would I get a roller catch
1:10 what is the name of this part
Instalasi kabelnya dong sekalian biar pada mudeng...
Cek video2 sebelumnya
gan bisa cantumin bahan-bahannya di deskripsi?mau nyoba2 bikin
Bahan menggunakan PVC sheet 5mm dan 3mm, as ulir 8mm, as ulir 10mm, capit udang, plat alumunium.
Where can I buy such parts?
Show parabens
How did you do the drawing cut h?
answer me, please
I use coping saw
good
Where did you get the gear nob?
+IceManLT I buy in car part shop
Ini materialnya apa saja mas?
Naruh posisi limit switch nya dimana nya gan?
lihat di video review DIY steering wheel.
what is the name of this part?
Can you share blue prints?
Can you give me a purchase link? Thank you.
shipping from Indonesia, I think its too expensive
@@AgaYuditraStudio Hello, thank you for your reply! I've watched this video several times. How much do you pay for it? Can you buy it in Amazon? Thank
bahan bahan yg diperlukan apa aja?perlu nyiapkan budget brp gan?
cek ke kaskus ya gan, atau masuk ke grup FB DIY SIM RIG
link groupnya donk
gan
What is the bolt you use for the gear shifter 2:01
i use long thread bolt
mas ini di produksi buat di jual apa buat sendiri,kalo mas buat 1 lagi dan untuk di jual saya minat mas
+M. Ghifari bisa mas saya buatkan mekanisnya.
Kontak via email ya agayuditrastudio@gmail.com.
biaya berapa gan dibuatkan mekanismenya ?
AgaYuditra Studio saya juga mau gan, tapi bisa kan ya untuk dipasang di steer lain
Bikin lagi gan, buat di jual. Saya minat nih.
mas, link nya udah ga bisa
Urusan cable2 gimana om... Saya cari dichanelnya si om ama buka link dari des nggak nemu..
Mau pakai base elektronik apa?
Arduino atau Joystik?
AgaYuditra Studio bagus mana murah mana?
Joystick lebih simple yaa?
bagus dan murah kalau saya pilih arduino pro micro. harganya sama dengan joystik. tapi memang butuh di program dulu.
kalau yg simpel dan gak mau terlalu ribet pakai joystik aja.
wiring joystik ada di tutorial bikin h shifter pakai joystik di channel ini. th-cam.com/video/VCHicPphY9g/w-d-xo.html
Makasih om... Saya tonton videonya
In which place I can get a drawing, please?
El Chasco soon i will upload the drawing.
Da pitam posto u klipu nisi pokazao naj lepse, kako da podesim ets2 da radi ovako kao kod tebe???
how to install electronic? just see other video on my channel about instalation.
can u help me out in making steering wheel with arduino?
Crazy Geek steeeing wheel arduino in my channel
AgaYuditra Studio yes!!! But im finding some problems in circuit. Can u help me out on that??
knop shisternya itu beli dimana mas berapaan tuh
Sekitar 50ribu. Di toko aksesoris mobil. Atau di toko2 online juga banyak.
terima kasih mas,,,,
Klo buatin mekanis stri ny tanpa body bisa bng?
Kalau mekanisnya bisa, kontak via email ya agayuditrastudio@gmail.com
what material was the gearbox made of
PVC sheet
What is the thickness of the pvc sheet?
can it work to 16th gear?
yes, I use range shifter. check this video th-cam.com/video/fMibZv5UUGU/w-d-xo.html
Can you use it for ps4? if so, how do you code it?
supbroZ987 pc only
pvc nya ketebalan berapa mm gan?
pakai 5mm
where can i find the sound track?
+wellbornwinter6 I make sound track use music jam in android
Gan itu yang buat jepit 2 biji apa
itu namanya capit kepiting atau capit udang.
link Template OFF
I need instructions on how to connect the circuit
Ng N I will upload circuit installation soon.
thank you very much, I'm researching about it
I can't find please help me please
Bagus!
Terima kasih, semoga menginspirasi.
I mean where are the electronics
H-shifter parts not given
Were are the wires to connect to pc
Check on my channel for electronic instalation.
ngejual bahan2 nya gak om?
Cek di tokped aja.
Measurements?
Check description
Open order?
mohon maaf tidak open order.
what is the name of this part? 1:11
roller catch / door catch
+AgaYuditra Studio thanks
Tem com Passar as medidas