Your channel is awesome! I recently got into the hobby a couple of weeks ago, found your channel, bought/built three planes so far and with all of them I used your channel to guide me through the setup (ended up having to return one of the planes because of a retract issue). Your channel has taught me so much and just wanted to say thanks for helping me put together my Night Timber X and Viper 90mm. Now I'm learning about setting up pilot fatigue from your channel.
Most helpfull as a refresher for me..I flew for 5 yrs...but havn't the last 2 due to health issues...so basically I forgot a lot of stuff I used to know! Such as last week putting a new reciever in a plane and getting it bound. That was a fiasco for some reason....good thing I kept notes!
Very glad you're getting through the fiasco that CAN be part of the hobby. I'm glad you got it done, and very glad you're back to flying! Good luck on you're maiden!
Great video, looking to get into planes. Coming from the drone and rc car world, so I have a ton of gear and batteries...but just need these type of videos. Good job!
I don't know what that reflex is...but the one I bought last year is flying on an AR 410 4ch reciever with a 4ch Dx4e Tx. It actually has 5 channels, as one controls safe modes....which my older plane dosn't have.
Reflex is a stabilizer and also allows you to do what I call "Auto-Leveling" - our video will show how to set this up and how to use it. 4 Channel will work, just won't allow you to change the modes while in flight ;( There's a few hand launch planes that we've done recently that a 4CH will work for, and well, so might get an AR620 and then you can save this 4CH for another plane??? Without AS3X/SAFE... AR410 bit.ly/3z5hT75 AR620 bit.ly/3z7WDO0
Hi Brian, Another great video! Will the SPMAR637T receiver provide battery voltage if used with this plane? What kind of flight time were you getting with this plane?
You don't really have to assign them, they're just on the proper channel, (says SBUS / PPM or some such thing) - watch the video and we'll show how to do it.
Hi Brian, i am assembling the t28 but when i connected everything using pwm the reflex v2 keeps flashing and moving the servos repeatedly and abnormally for a very long time. The motor turns on and off intermittently too. Do you know what happened? Also，when i used sbus everything worked but i noticed that the motor only turned when my throttle was already at 50%. Do you know how to fix this? Thanks!
Can you do a review of the 800 mm Corsair? Story goes it I bought a 1400mm Corsair and they sent me the 800mm I returned it got my right plane at it had all the wrong wires for my dx8 and I returned that one also. They only gave me $100 back. Now I don't like my carbon cub because it does not descend and is not agile enough to fly it other than for in figure eights and in circles- so I bought the 800mm Corsair, now there's no good videos on it like you do, and it's unclear whether or not you need glue. Both unboxing videos state glue is needed. Of course I bought foam to foam anyway. I think alot of viewers need a good video of the 800mm Corsair! I will be watching all your videos! You and your 'camera crew' are the best
Or hobby zone one of the two, I tried to go on hobbyzone after that and I got a notification that hobby zone could be trying to steal your money so I went to horizon hobby
Your channel is awesome! I recently got into the hobby a couple of weeks ago, found your channel, bought/built three planes so far and with all of them I used your channel to guide me through the setup (ended up having to return one of the planes because of a retract issue). Your channel has taught me so much and just wanted to say thanks for helping me put together my Night Timber X and Viper 90mm. Now I'm learning about setting up pilot fatigue from your channel.
Most helpfull as a refresher for me..I flew for 5 yrs...but havn't the last 2 due to health issues...so basically I forgot a lot of stuff I used to know! Such as last week putting a new reciever in a plane and getting it bound. That was a fiasco for some reason....good thing I kept notes!
Very glad you're getting through the fiasco that CAN be part of the hobby. I'm glad you got it done, and very glad you're back to flying! Good luck on you're maiden!
Great video, looking to get into planes. Coming from the drone and rc car world, so I have a ton of gear and batteries...but just need these type of videos. Good job!
Awesome! Glad you're here with us - welcome ;)
I don't know what that reflex is...but the one I bought last year is flying on an AR 410 4ch reciever with a 4ch Dx4e Tx. It actually has 5 channels, as one controls safe modes....which my older plane dosn't have.
Reflex is a stabilizer and also allows you to do what I call "Auto-Leveling" - our video will show how to set this up and how to use it.
4 Channel will work, just won't allow you to change the modes while in flight ;( There's a few hand launch planes that we've done recently that a 4CH will work for, and well, so might get an AR620 and then you can save this 4CH for another plane???
Without AS3X/SAFE...
AR410 bit.ly/3z5hT75
AR620 bit.ly/3z7WDO0
Love the colors!
Me too!
awesome build and setup,cool plane
Thanks!
So Brian between this and the eflight 1.1 which one would you recommend. Looks wise this is imo nicer looking than the 1.1. Your thoughts ?
Hi Brian,
Another great video!
Will the SPMAR637T receiver provide battery voltage if used with this plane?
What kind of flight time were you getting with this plane?
Bad ass again guy's
Thanks Shane!
Can yall do the corsair
How do I assign the 3 reflex modes to a switch on the transmitter? (11/21/2022)
You don't really have to assign them, they're just on the proper channel, (says SBUS / PPM or some such thing) - watch the video and we'll show how to do it.
Thank you Brian, great video, a lot of important information,
Hi Brian, i am assembling the t28 but when i connected everything using pwm the reflex v2 keeps flashing and moving the servos repeatedly and abnormally for a very long time. The motor turns on and off intermittently too. Do you know what happened? Also，when i used sbus everything worked but i noticed that the motor only turned when my throttle was already at 50%. Do you know how to fix this? Thanks!
NIIIICE 👍🏻
it sure is! I want flaps, and more rudder, but otherwise, it's a gem!
Can you do a review of the 800 mm Corsair?
Story goes it I bought a 1400mm Corsair and they sent me the 800mm
I returned it got my right plane at it had all the wrong wires for my dx8 and I returned that one also. They only gave me $100 back.
Now I don't like my carbon cub because it does not descend and is not agile enough to fly it other than for in figure eights and in circles- so I bought the 800mm Corsair, now there's no good videos on it like you do, and it's unclear whether or not you need glue. Both unboxing videos state glue is needed. Of course I bought foam to foam anyway. I think alot of viewers need a good video of the 800mm Corsair! I will be watching all your videos! You and your 'camera crew' are the best
YES - coming soon ;)
Why is "They" when you say they only returned $100?
Horizon hobby and great thanks!
Or hobby zone one of the two, I tried to go on hobbyzone after that and I got a notification that hobby zone could be trying to steal your money so I went to horizon hobby
Also on my carbon cub the battery and charger stopped working 3 months after I bought it
I fly my Trojan on 3s 1000mah battery all the time did not change anything. and it fly's a lot better on 3s!
nice!!!
how do you have the money for all those rc planes i only have 1 1/2? :D
Boy that was a longgggggg Story.. lol
probably