I advise this company to provide a video with EVERY step! The reason people are having an issue putting this together is because you don't show one of the most important steps! When trying to connect the middle tube by the front of the seat, you must align it and us the foot peddle bars to slide it to where it fits...this is tricky but it will fit and you'll be able to put the screw in . In this video he does it completely different that does not work !
@@odogg6899I love when people say stuff like this. But hear me out… if you’re going to do a video to show the steps, why not show all the steps? 🤔 that QR code is quite pointless if they stopped at step 7 and ignored 8 and 9… so who is the real rere? Also, why are you here watching the video, if you were able to get it? 😊
I used this video instead of the instructions. I only had two issues. Opening the mainframe is a little trickier than it shows here. It took me a few minutes to figure it out. There's a center pole that has to be positioned along the seat pole. It's hard to explain. Hopefully, someone in the comments can explain what I'm talking about. Once you figure that out the rest is a piece of cake thanks to this video. The other issue I had is I was missing the nut and washer to tighten the screw for that pole I was speaking of earlier. Anyway, good luck and have a happy workout :)
The video was great for me even though he did not show the resistance bands being attached to the seat. I have gotten use to figuring out and putting items together. Thank you.
Putting it together with the video was very easy. My only issue is that the seat is very low. I have to put my feet on the peddle in order to raise the seat to sit down on it. I'm not sure if that is how it's supposed to be. It doesn't look like that in the pictures or videos.
This video was perfect for setup, but I'm having an issue. I'm struggling to unscrew the blue knob (piece #10) that adjusts the handle bar height, I think I might have twisted it in too tight and now I cannot adjust it. Any idea how to loosen it? :(
@@jazzykatrina55 yes it was my misunderstanding. Thank you for even saying anything I forgot I even wrote this. So that little lever aka the connecting tube it was on the outside of the handle bars so but then I kinda scrunched the machine to make the lever come inside the bike so I could connect it to the seat. I had to go to sleep and wake up to even come to that conclusion ☺️
@@Tajagee123Ugh i think mine is like this too and i can’t figure it out 😫 i feel so slow right now and i can’t find a tool big enough to get this piece off if that’s what im even supposed to do 🥴
@@christinazocchi3293 nooooo don’t take the connection piece off it will flip into place when you maneuver the machine in a certain position I thought I had a defective but I didn’t it just came like that to protect that piece but it’s suppose to connect to the little piece right by the bike seat
✋️ wait, this video does not include the resistant bands! The ones I have seem to short and tight hindering the machine from moving up and down. This is very disappointing 😞 I need to know what's wrong.
I can’t get past step two because the screw keeps spinning and spinning and I can’t get it out. Why on earth would they send it with the screws already in if we have to take them out. Dumbest thing ever. Now I have to throw the whole thing away. Waste of money
Whew, thank God for this video!! I thought I would be lost by the instructions, but this video saved the day!
Video was fantastic! When i opened the box i felt lost. But the video was so great i felt like a champ. I did it. Lol
I advise this company to provide a video with EVERY step! The reason people are having an issue putting this together is because you don't show one of the most important steps! When trying to connect the middle tube by the front of the seat, you must align it and us the foot peddle bars to slide it to where it fits...this is tricky but it will fit and you'll be able to put the screw in . In this video he does it completely different that does not work !
Yes, please include entire video from beginning to end for instructions please and than you.
I did everything he did in this video and had no issues. Y’all act like yall rere.
@@odogg6899 Fr! Same here. People just be ready to complain about anything lol
@@odogg6899I love when people say stuff like this. But hear me out… if you’re going to do a video to show the steps, why not show all the steps? 🤔 that QR code is quite pointless if they stopped at step 7 and ignored 8 and 9… so who is the real rere? Also, why are you here watching the video, if you were able to get it? 😊
This is what ticks me off about companies making it difficult for you to install!!!! Pathetic!!!
I used this video instead of the instructions. I only had two issues. Opening the mainframe is a little trickier than it shows here. It took me a few minutes to figure it out. There's a center pole that has to be positioned along the seat pole. It's hard to explain. Hopefully, someone in the comments can explain what I'm talking about. Once you figure that out the rest is a piece of cake thanks to this video. The other issue I had is I was missing the nut and washer to tighten the screw for that pole I was speaking of earlier. Anyway, good luck and have a happy workout :)
Thanks for the video I was a little confused but this helped me a lot I did it!!! Thanks Again ❤
Very great video. Without this I would’ve been lost
You did it! 🙌
The video was great for me even though he did not show the resistance bands being attached to the seat. I have gotten use to figuring out and putting items together. Thank you.
Why not show the part connecting the bands on the back of the seat
I agree 3 bands doesn't fit properly in the space.
Mine either! I need a refund asap! I cant even use the machine. @carolynaduhenekwarteng
Putting it together with the video was very easy. My only issue is that the seat is very low. I have to put my feet on the peddle in order to raise the seat to sit down on it. I'm not sure if that is how it's supposed to be. It doesn't look like that in the pictures or videos.
You can actually adjust that:)
How pls it keeps aggressively coming down and slicing me and my daughters legs@nanaaaf
This music makes me want to get on the R07 and ride into the sunset.
😂same
Resistance bands?
Mines don’t works once again I have to return the equipment 0:31
😮
I am unable to screw in the foot pads. It says counter clock, and they are not going in. Has anyone else had this problem?
This video was perfect for setup, but I'm having an issue. I'm struggling to unscrew the blue knob (piece #10) that adjusts the handle bar height, I think I might have twisted it in too tight and now I cannot adjust it. Any idea how to loosen it? :(
My resistance bands make seat sit low
When I see other videos the seat is sitting up higher. Does anyone know how to achieve that?
So easy to install thanks 🙏🏾
Thanks!!
I’m having a hard time inserting the monitor? Idk if the space is too small
Does this help also with lower abs
Thank you 😊
My tightening knob was too big to fit in the handle
My connecting tube was sent to me wrong wow 😒
Was this fixed
@@jazzykatrina55 yes it was my misunderstanding. Thank you for even saying anything I forgot I even wrote this. So that little lever aka the connecting tube it was on the outside of the handle bars so but then I kinda scrunched the machine to make the lever come inside the bike so I could connect it to the seat. I had to go to sleep and wake up to even come to that conclusion ☺️
@@Tajagee123Ugh i think mine is like this too and i can’t figure it out 😫 i feel so slow right now and i can’t find a tool big enough to get this piece off if that’s what im even supposed to do 🥴
@@christinazocchi3293 nooooo don’t take the connection piece off it will flip into place when you maneuver the machine in a certain position I thought I had a defective but I didn’t it just came like that to protect that piece but it’s suppose to connect to the little piece right by the bike seat
Thank you
This device was defective and now I wasted my money and have to return it after wanting to use it so badly
Ok, but how to adjust my seat?
Right mine is damn near on the ground
@@Min.Min84did you figure this out? because my seat is close to the ground as well
✋️ wait, this video does not include the resistant bands! The ones I have seem to short and tight hindering the machine from moving up and down. This is very disappointing 😞 I need to know what's wrong.
I just stood up on both the peddles and then the seat came up
This music is working my nerves
This video is horrible and don’t show how the resistance part works
I can’t get the pedals on I prefer mine from tik tok 😭
I was initially having the same issue but used to wrench instead of trying to manually add the pedals as shown in the video.
I can’t get past step two because the screw keeps spinning and spinning and I can’t get it out. Why on earth would they send it with the screws already in if we have to take them out. Dumbest thing ever. Now I have to throw the whole thing away. Waste of money
Thanks for this setup video . Very helpful . ❤❤❤👍🏻👍🏻👍🏻