SCX24 MOFO RC UAF CHASSIS BUILD: STAGE 3 - PAINT, BODY FITMENT, MAGNET MOUNTS, LIGHTING & DETAILS
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2024
- Finishing up the Mofo RC UAF/SMP build in this segment. Focusing on fitting and mounting the FMS Atlas 6x6 body, quite a bit of paintwork & details, and of course - lighting. #moforc Enjoy!
Tuning: • SCX24 - TUNING SESSION...
Stage 2: • SCX24 MOFO RC UAF CHAS...
Stage 1: • SCX24 MOFO RC UAF CHAS...
(Don't forget, you can watch at faster speeds in "Settings" to save time!!)
0:00 - Intro/Review
1:19 - Body & Paintwork
3:01 - Front Magnet Mounts
4:08 - Magnet Process
7:28 - Body Magnets Issue...
9:10 - Chassis Magnets
11:23 - The Hood
12:51- Body Detail Overview
14:08 - Grill/Visors/Decals
15:12 - Lighting Overview
16:55 - LED Test
17:36 - LED Install/Routing
18:51 - Lights on / Test
21:07 - Weigh-in
23:02 - Body Fitment Overview
26:11 - Articulation
27:37 - Final Thoughts
30:26 - Gallery - ยานยนต์และพาหนะ
Just going back and watching these older builds...
What a masterpiece!
Right on.
Thank you. This build is definitely a fan favorite!
No wonder it's hot in Texas, because you're always bringing that 🔥🔥🔥✌️
Haha! Cheers mate!
This is the nicest, coolest and amazing looking little Power Wagon Build I ever seen. Wow, what a awesome Truck!
Thank you so much! I really appreciate it.
@@bcochener I got a a simular Lcg Carbon Frame build only with 43mm Shocks, but very low and short. I got a Atlas Body here but I'm not that good like You at Painting and Your Colour is the Icing on the Cake. I try to copy Your Style with Wheels etc. and mix it with mine but I only can paint it simpler. By the Way, Your Truck is now my Wallpaper on PC. Thank You! Would love it to see a Outside running Video of it.
@@gertrudeausbuxdehude8842 That’s awesome! Painting is really easy, it’s the masking that takes some time and attention to detail. I’m sure yours will come out great!
I’ll try and get some running vids of it! Thanks!
Damn Brian! How is it that everytime. your most current build is my favorite. But I love them all so much. Such AMAZING works of art you have created. Beautiful! What else can I say. So much beauty and performance in a little package! You are a magician my friend!!!!
Thanks Dirk! I feel the same way, every build is my new favorite… until the next one!
Brian, I recently jumped into the the world of mini crawlers and stumbled across your videos. I have learned so much from your content and just wanted to reach out and tell you THANK YOU! Have you thought about starting a Patreon membership? It would be great to get more in depth content from you I.e. detailed parts list with links, member only live calls, more in depth videos. I know how much time must go into your videos, and it would be a great way for people to help contribute with a paid membership. Thanks. Jason
Well, you are very welcome! So glad they are helpful to people! I haven’t given much thought to Patreon, but that’s not a bad idea. It’s all time dependent with me, juggling life as well. Thanks so much for tuning in and your kind words!
That is the most incredible build I have seen yet. Looks just like a hot rod power wagon!
Appreciate that! Yeah, I am in love with the finished product.
Not usually a fan of power wagons but I gotta say that thing looks mean. The color scheme looks great with those parts.
Thanks! I agree.
Awesome job it looks good, I like the paint color
Same. Drool...
This build is sick! Can’t wait to see it running! 🤘🏼😆
Thanks! I can't wait to run it!
As a painter of cars , I really like the colour scheme that you have chosen for this can build.
Wow, thats nice. I never seen a full custom scx24 before. Makes me want to build one. Right now i have a deadbolt but with a 1/20 toyota pickup body.
Thanks. Go for it! Not too difficult at all. Thanks for tuning in brother!
Beautiful!
Master piece.
awesome 😎
Wow, cool.👍👍👍👍👍
That's super nice!!!!!!!!!!!!!
That’s awesome dude, love the sunvisor, and the grill super cool. Great looking build love it
Thanks Andy!
Very nice Brian. I really like the tires you chose, adds to the classic look. It should be a beast on the trail, course or whatever path you choose
Thanks DoubleA. Such a phat stance, I love it.
Bad ass for sure. You cant beat the tape or the paint! That visor though you got 2 sand shave cut or gooogle that one it doesn't belong... PS. Let Nick know if he wants 2 get some slide on not decals this would be nice. I have $$$ in stickerz but I just cant do it......... Fantastic work as always 😊
Yes it is I love the headlights, wow your whole rig looks awesome dude love it. This is the beauty of this awesome hobby make them your own. You did an outstanding job 👍👍😎
B-e-a-utiful ! Awesome colors! I really like the rims and tires set up, nice work🤘
Thank you!
Man that really turned out nice Brian
Thank you! Cheers!
Awesome job man that is a great lookin rig.
Thank you so much!
I've avoided messing up the paint by laying down a large piece of super sticky super thin 3M clear packing tape. Then I glue on the magnets. The glue softens up the paint allowing it to shift and move. I've never had an issue since. Otherwise I follow the same steps you do.
This was strange indeed. Same process as all of mine, first ghosting. But, I think it was due to the curved shape of the hood and the mags not being able to pull together evenly. I have heard of another method besides tape I may try. Thanks for tuning in Miguel!
Quality build mate, Never been a power wagon fan but that looks tough
Really Amazing 😍😍 excellent work 😉👍
Thanks man! Your builds aren’t too shabby either 😊!
@@bcochener I do not agree 😅 my constructions do not differ from the original one I am just improving a little, I am not able to redo a whole construction like yours 😔👍😉
Congatulations you have more money than me and have built my ideal rig lol. Literally everything id like to have on a lcg chassis.
I love it😢
next time you can use double sided sticky tape for the magnet mounting to the body. i try to never glue to paint because it can be damaging like you have shown if not way worse. nice build though, i dig it.
I just glued another set on a build no problems. So, this is due to the metallic paint layer (backing color) from what I have found talking with some other folks who had the same ghosting. All using gun metal PS paint. All my other builds with magnets have not done this - (black, white or silver backing colors.)
I think it's too hot here to rely on double sided tape for that hold. It would heat up, soften and pull off. Had that issue before.
--Thanks for the tip and thanks for watching!
Any chance the glue softened the paint causing the dimples? The paint on the hood looks good. I think I would've covered the dimples with either 3d printed turbos or exhaust stacks. Y'all have a badass day 🤘
It did. Turns out others have had that result with the gunmetal backer. Never had that issue with black/white/silver backers. Strange… but it did come out great on the end. Thanks for tuning in!
Great job man looks great 😀I've had that happen on the last two cliffhanger bodies I painted. I was using gunmetal gray. I was thinking I messed something up until I saw your video! Beats me man!! Ill let you know if I figure out what went wrong. In the meantime carbon fiber vinyl will help mask mine.
Hmm, maybe it was the gunmetal. That was my backer (light gunmetal). So strange indeed.
I'm liking these new technologies and ideas. I got out 100% of RC last year, SCX24 being my only experience. 1/24 seemed so limited. Was going to try the Gen8 V2 before throwing in the towel but just walked away and sold everything. Looking back these past weeks. Things have changed in the past few years. My interests were crawl, mud. I tried indoor but couldn't nail down proper space or solid materials. Paper mache and foam seemed weird, unnatural. Thinking wider, longer, low cg. Betty cab for sure. Could it be possible to do this in a budget build?
Oh heck yeah. I should do an extreme budget build…? Now that so many parts are made by different companies, yeah you can find things very affordable. And heck, a lot of the parts I use are for color or scale detail… Not adding to the performance. I could take a stock one and make it super capable, but I have to love looking at it too!!!
That is beautiful!!!!!!
How much
😂
I’ll trade you my jeep
Where are you get the light buckets for the headlights, yeah what a beautiful Rig’s I love it
The light buckets, lenses and grill came as a little set. From FMS, for the Atlas body. Super cheap, just a few bucks.
Hi Master . Can you answer one question for me . Where can someone over the pond get the motors that you use . As I can only find drone motors over here , are they drone motors or another type . Please help this unworthy pupil to reach higher hights in building the the best 1:24 crawler over the pond .
All of these are made for 1/24 specifically. They are similar to drone motors, but the shaft is different on drones I think. Mofo RC or Furitek will ship to you. Can you find the Surpass brand there? They make a motor that is the same size as the Furitek Komodo brushless (I have used it in my silver and the gunmetal JLU builds).
Hey, we met at hobby town and I had that blue c10. I was wondering, besides hobbytown and just nature, are there any indoor or outdoor crawler places open to the public?
Hey buddy! There is a new hobby shop in Cedar park about 10-15 minutes west of Hobbytown. They have indoor and outdoor tracks I believe. Mini and 1/10 crawler courses and drift track as well. Google them, I forget the name.
Just found it. its called the Hobbyshop 900 Lacy Dr. Leander, TX 78641. Not in Cedar Park either..
www.thehobbyshoptx.com/
@@bcochener Found them, The Hobby Shop looks fantastic, thank you so much. I'll make sure to go check them out!
🥰🤩💥💯👍💪👏🤝
where did you get the housing for your lights?
Ali express I think. They are just the FMS parts kit @12:59. Fair RC may have it?
@@bcochener thank you - I am taking a stab at building a build - a different color cab. No worries - not biting but you inspired me. I just received the cab yesterday ~ I purchased two and I stayed up until 3 am crawling and listening to Herbie Hancock
How do you like those portals and how much speed do you lose I mostly rub my smp on 3s not to make it fast but to have a little punch I've never ran portals but hear they are slower
Mofos portals have a 25% gear reduction I believe. You can add overdrive worm gears to get some speed back, and 3S of course.
@@bcochener so if I moved my 23% to the rear and got a 12t for the front it would hardly be noticeable thanks
How did u do the hinge on this body
@1:19
@@bcochenerok thx for the help
What tyres are you using dude? Super fat look on them
PH MudBoss tires w/ uncut Lil Nova Foams on WT Micro Island Style wheels.
is it possible to put any body on this chassis?
Sure.
How does the BEC mount?
Thanks!
Zip tied to the cross bar in front of the motor/trans. Its covered in Stage 2 of the build - Links in the description. Thanks for watching.
@@bcochener Thanks!
@@bcochener So the battery balance plug plugs into it, and then it plugs into the receiver, correct?
@@mr.dillpickle Yes. Regular battery plug powers ESC. Remove positive wire between ESC and receiver.
What receiver are you using
An FS2A-4CH micro receiver for the Flysky GT5.
Awesome build bud thanks
too bad that this chassis is sold out
patience... haha.
Awesome work brother. Wish you had Instagram..
Thanks Jay. Insta… ?