Have you seen the Facebook group, Microsoft Power Automate Professionals, where we network and solve PA problems together: facebook.com/groups/754059285247921/ 🔥🙌
Great tutorial, at 14:44 I couldn´t see dynamic content and looking why that happened, sounds funny, it was because of the resolution was to close and didn´t appeared in the screen for that reason. Thank you, Anders, another time giving value with your knowledge. Thank you, a lot!
Amazing video! Everything is so clearly explained. I have an extra question regarding a small hurdle I've encountered when using dynamic tables. In my case, the spreadsheets are protected, and users can only modify selected columns. If I remove the protection, my workflow is fine. However, when I set the protection back, I get the following error message: "The request is forbidden by Graph API. Error code is 'AccessDenied'. Error message is 'You cannot perform the requested operation.'" Do you have any ideas on how to work around this, or must I resign myself to leaving the workbooks unprotected?
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 7000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Hi Anders! Love your videos! Thank you for all the work you put into them! I ran into an issue where I want to change calculation mode in excel from auto to manual in the beginning of the flow and then back to auto once the flow is complete. No matter how much I tried, I can’t get it working. I have updated scripts as you have shown here, I have recorded scripts. I tried in same and different browsers windows. It is just not working. Can you please suggest something? Thank you!
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Thanks for the video, but in the minute "44:20" you mentioned in the concat there are three things and you didnt put anything after ' "ID": " ', also you didnt put in the third one after variables('RowLookup'), ' "" ', i didn't get it why we made three if we concate only ID with variables
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 11,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Thanks for your wonderful video, but what if there is no table in the excel, if it is possible to generate a dynamic table? The count of the row and column are unknown.
Hey Penny. No, not with the Excel activities, but then you can generate an Office Script instead and invoke it from Power Automate. Kind regards, Anders
Hii Anders sir make a video on data scraping of Amazon or Flipkart website while scraping the Hyperlinks data getting scraped in an unstructured format make a video on this as soon as possible
Thanks for this video! So helpful as always! one thing I note, for Run Scripts I don't have a field for Active Sheet. Does anyone know if that is a change that was implemented since this video came out?
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 6000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
So, I can't get past the step of copy/paste into the expression bar.. add(float(item/TotalSales": "@items('Apply_to_each')?['SalesStore1']),float(item/TotalSales": "@items('Apply_to_each')?['SalesStore2'])) .... It keeps telling me the expression is invalid.. I try to click Ok multiple times like you said, but it won't let me proceed the same as you in the video.. Any tips?
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 6000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Hey Suraj, thanks a lot for all your support. A video on that is not on the to-do, and I'm not 100% sure, what you mean? Can you post your query on the Discord (with an elaboration)? Then we solve it. The Discord link is in the Description. Kind regards, Anders
In the first step at 5:35, I'm not getting list of folders instead I'm getting list of files. There the template file I'm not getting. Please suggest. Or can I do complete operation in Power Automate Desktop?
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
#andersjensenorg we are converting the Excel data to a table, then only Power Automate is able to read... but when we get a file from an email, we will save that to the Onedrive folder and I want the Power Automate should convert it to a table to process further steps within that flow is there any possibility for that? Your suggestion is a great help, Thanks in advance.
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 8000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 8000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Hello there, is there a way to extract data from a pivot chart with power automate? In my case, power automate just finds "normal charts" in my sheets but I can't fetch data from pivot charts. Thank you in advance!
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 7000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 6000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 10,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Hey Blue sky blogs Thanks for writing. I'm getting more than 50 questions/comments every day and having difficulty answering everyone (I try my best). I've created my Microsoft Power Automate Groups, where we all can post and solve problems or hang out around our favorite tool, Power Automate. So you're very welcome. Get the addresses here: th-cam.com/video/_QRI-Yo2h8U/w-d-xo.html Have a great day. Kind regards, Anders
Edit: Why are you starting off doing something and then talk about what you will do with office scripts (last tab) "on steriods"... what is the objective and what is it that you will do for this session... It seems you just dove and provided zero context...
![Power Automate Desktop Tutorial for Beginners [2024]](http://i.ytimg.com/vi/B0cHOdBv7Jg/mqdefault.jpg)
![เปิดใจ “ต้นหอม ศกุนตลา” หลังโดนพาดพิงธุรกิจที่เคยทำ และผลกระทบทำถูกปลดฟ้าผ่า! | แฉ 24 ต.ค.67 [2/3]](http://i.ytimg.com/vi/vCi5OIqlxaE/mqdefault.jpg)
Have you seen the Facebook group, Microsoft Power Automate Professionals, where we network and solve PA problems together: facebook.com/groups/754059285247921/ 🔥🙌
A heartfelt thank you from Morocco.
My pleasure 😊 Kind regards, Anders
Thanks so much for this video! Everything is explained clearly and the pace is perfect for a beginner.
Hey sbrutcher, I'm so happy to hear - thanks a lot 🙂🙌
god bless you man! WE have been learning a lot from u !
Thanks a lot for all the supportive comments 🙏😊
This is just awsome!!! Thank you so much! Create job! My applauds
I'm so happy to hear, thanks a lot 🤩🙏
Great tutorial, at 14:44 I couldn´t see dynamic content and looking why that happened, sounds funny, it was because of the resolution was to close and didn´t appeared in the screen for that reason. Thank you, Anders, another time giving value with your knowledge. Thank you, a lot!
Hey pablo, thanks a lot 😀 My next shopping is a bigger screen (16:9 resolution), so I can record in 4k 🔥
Kudos great content sir 👍
Thanks a ton, Suraj 🙏🙌
Amazing video! Everything is so clearly explained. I have an extra question regarding a small hurdle I've encountered when using dynamic tables. In my case, the spreadsheets are protected, and users can only modify selected columns. If I remove the protection, my workflow is fine. However, when I set the protection back, I get the following error message: "The request is forbidden by Graph API. Error code is 'AccessDenied'. Error message is 'You cannot perform the requested operation.'"
Do you have any ideas on how to work around this, or must I resign myself to leaving the workbooks unprotected?
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Great video!
It’s posible to fill a cell, if there is no an ID columns? Perhaps looping up in w columns
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 7000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Hi Anders! Love your videos! Thank you for all the work you put into them!
I ran into an issue where I want to change calculation mode in excel from auto to manual in the beginning of the flow and then back to auto once the flow is complete. No matter how much I tried, I can’t get it working. I have updated scripts as you have shown here, I have recorded scripts. I tried in same and different browsers windows. It is just not working. Can you please suggest something?
Thank you!
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Can you make a video on VBA code run using power Automate desktop
1.run main macro function simple
2. Single or multiple parameter macro run
Excel VBA Series videos of Excel from basic advance like comparing 2 datatable using Macro Power automate desktop 2022 👍
Have you seen the last part of this video, Suraj? Office Scripts are the new VBA 😊
Thanks for the video, but in the minute "44:20" you mentioned in the concat there are three things and you didnt put anything after ' "ID": " ', also you didnt put in the third one after variables('RowLookup'), ' "" ', i didn't get it why we made three if we concate only ID with variables
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 11,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Great video! Looks like the course material is gone now though - I only see a file about Pepsi employees. 😞
I'm so sorry, Oliver. Thanks for letting me know, it's now fixed 😊 Kind regards, Anders
Thanks for your wonderful video, but what if there is no table in the excel, if it is possible to generate a dynamic table? The count of the row and column are unknown.
Hey Penny. No, not with the Excel activities, but then you can generate an Office Script instead and invoke it from Power Automate. Kind regards, Anders
Hii Anders sir make a video on data scraping of Amazon or Flipkart website while scraping the Hyperlinks data getting scraped in an unstructured format make a video on this as soon as possible
Thanks for this video! So helpful as always! one thing I note, for Run Scripts I don't have a field for Active Sheet. Does anyone know if that is a change that was implemented since this video came out?
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 6000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
So, I can't get past the step of copy/paste into the expression bar.. add(float(item/TotalSales": "@items('Apply_to_each')?['SalesStore1']),float(item/TotalSales": "@items('Apply_to_each')?['SalesStore2'])) .... It keeps telling me the expression is invalid.. I try to click Ok multiple times like you said, but it won't let me proceed the same as you in the video.. Any tips?
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 6000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Hy, getting same issues. Is there any solution?
Hii Anders sir can you make a video on Dynamic row count in PAD
Hey Suraj, thanks a lot for all your support. A video on that is not on the to-do, and I'm not 100% sure, what you mean? Can you post your query on the Discord (with an elaboration)? Then we solve it. The Discord link is in the Description. Kind regards, Anders
@@andersjensenorg sir I mean to say in an excel file the rows are continuously changes as per data that dynamic count only that's it 👍
In the first step at 5:35, I'm not getting list of folders instead I'm getting list of files. There the template file I'm not getting. Please suggest. Or can I do complete operation in Power Automate Desktop?
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Could please explain how to do the same thing using an automated cloud flow😢
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 12,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
#andersjensenorg
we are converting the Excel data to a table, then only Power Automate is able to read...
but when we get a file from an email, we will save that to the Onedrive folder and I want the Power Automate should convert it to a table to process further steps within that flow
is there any possibility for that? Your suggestion is a great help, Thanks in advance.
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 8000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Is it possible to remove conditional formatting in excel using automation flow
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 8000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Hello there, is there a way to extract data from a pivot chart with power automate? In my case, power automate just finds "normal charts" in my sheets but I can't fetch data from pivot charts. Thank you in advance!
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 7000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
How do I paste clipboard contents into a designated cell in Excel?
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 6000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Unable to follow with 2024 Power automate :(
Untick the "New designer" toggle 😊
Is there anyone that can help me build a cumulative excel report based on data coming in from an email every day?
Thanks for writing 😊 I'm getting more than 50 messages daily. While I read all of them, I can’t reply to everyone 😔 But I’ve created an RPA/Automation community where we’re 10,000+ RPA Developers helping each other with solutions and our careers. Here’s the video on how to join (the invitation link is in the video description): th-cam.com/video/xWFz-S96XGo/w-d-xo.html Kind regards, Anders
Hi it showing me error while loading the excel
Hey Blue sky blogs Thanks for writing. I'm getting more than 50 questions/comments every day and having difficulty answering everyone (I try my best). I've created my Microsoft Power Automate Groups, where we all can post and solve problems or hang out around our favorite tool, Power Automate. So you're very welcome. Get the addresses here: th-cam.com/video/_QRI-Yo2h8U/w-d-xo.html Have a great day. Kind regards, Anders
Edit: Why are you starting off doing something and then talk about what you will do with office scripts (last tab) "on steriods"... what is the objective and what is it that you will do for this session... It seems you just dove and provided zero context...
Thanks for the feedback 🙌