Hello PJ Chen. I am eternally grateful for your videos. I am now leaving the jewelry world. I thank you for your tutorials, it really helped me during my 4 years jewelry designing. I hope you continue your tutorials and maybe one day i will be back in designing. I may not bought your membership but i know you will understand. Thank you so much for these tutorials and i hope your channel will gain more subs and viewers
Thank you John. If you decide to come back to jewelry world, the videos will always be on my channel. Even if it is not for jewelry, 3D printing and prototyping are very fun. Wish you good luck on wherever you go. Best!
Hi Pj, great video as always. I have a question. when I select on selection filter, what box should I check so I can modify/adjust the bridge. Thank you
Hi PJ! Thank you for the video. I have a problem with my bridge command. every time I click on bridge and then on filter faces a chart comes up and I have to choose the choices and then when I select the faces on the ring nothing happens. they turn yellow which means they are selected but when I press enter nothing happens. I don't know why.
Hi PJ, I'm mostly working with STL scan files, like to know is there anyway to convert smooth surface in Rhino, I've tried meshtoNurbs command but not working as I want . Thank you
Hello, I have a question about how I can change the dimension of the ring to adapt it to different numberings without having to redo it from 0 for each of the numbers?
if you are talking about ring size. it depends on if you have the stone on it or not. you can 3D scale it up and down 1 size without notice much about the thickness. if you have stone. you need to rebuild the ring. As long as you have original curve on. it should not take too long to rebuild.
Hi PJ! I came again☺️☺️☺️ I saw a other TH-cam video from McNeel and he drew a circle, then make it a subd friendly curve, and then enlarge it outbound for the thickness of ring with a gumball..?? I followed samely, but my subd friendly circle doesn’t allow me to create a surface with a gumball.. ?
@@PJChenJewelryDesign thank you for your reply!☺️☺️ yes, I can see the red/blue dot in the middle of arrows in the gumball as you said and It is extrusion for tubing it.. what is in the video is for the thickness of ring.. in the video, he just turn the crv into. Subd friendly curve and then drag the square at the end of gumball and it makes surface outbound from the circle??? could you watch the video? It doesn’t seem to work for me..
Hello PJ, when I select the faces then hit enter it says : "Bridge end has to be within a single object" What am I doing wrong, I cannot get them to connect, I am using Rhino 7
TH-cam Memberships are currently available to viewers in 69 countries, and TH-cam will continue to expand to more countries. If you don’t see the JOIN button. You may not be in one of the 69 countries. it is USD$4.99 per month. Also, the JOIN button may not be visible on some videos and on iOS, but TH-cam is working to make it more widely visible. In the meantime: Viewers in eligible countries can become members of the channel by clicking the JOIN button on the channel page from a computer. Viewers who become members on a computer will get access to membership perks on all platforms. Please use Chrome browser If the JOIN button doesn’t show up, please use the following link th-cam.com/channels/R3Dddx8nw4CYSkKmlvzXiA.htmljoin
Dear PJ, thank you so much for this very helpful video. I would love to subscribe to the sub D course, but it is a bit expensive for me as I'm a student. Could you let me know by email when you'll do a discount for this course? Thank you
Rhino Modelling is Best!!!
Super!!
Hello PJ Chen. I am eternally grateful for your videos. I am now leaving the jewelry world. I thank you for your tutorials, it really helped me during my 4 years jewelry designing. I hope you continue your tutorials and maybe one day i will be back in designing. I may not bought your membership but i know you will understand. Thank you so much for these tutorials and i hope your channel will gain more subs and viewers
Thank you John. If you decide to come back to jewelry world, the videos will always be on my channel. Even if it is not for jewelry, 3D printing and prototyping are very fun. Wish you good luck on wherever you go. Best!
Best Rhino teacher ever!
Yeah!!
I love your explanation!! I Wish you continue with some videos about subD. Thanks a lot!!
Thank you, I will
Thank you, as always, for the clear explanation and instructions!
My pleasure!
Super helpful, thank you!
Glad it was helpful!
Thanks for the transparent lessons
My pleasure!
Great class!!!
Glad you enjoyed it
simple and awesome
Thanks a lot 😊
Finally wait is over 🙂
^_^
Thank you, PJ. I have subscribed to your SubD course and I look forward to more SubD video examples.
More to come!
THANKS A LOT MAM FOR SUCH A NICE INFORMATION
Happy to know you like it
Thanks a lot.👍👍
Most welcome
You are so amazing,Thank you from Armenia
Thank you!! Glad you like my videos
great tool to use, thankyou
You're welcome!
Super
Super!!
Please tell me, where I can download the Matrix 9 or 8 ?(demo version)
I do not know if they have trial version. you can contact Gemvision directly.
Hi Pj, great video as always. I have a question. when I select on selection filter, what box should I check so I can modify/adjust the bridge. Thank you
You can either do the face, edge or vertics. three options
Hii, Chen nice to uploaded your interesting video kindly 1 video upload in which no use grasshopper to make Delaunay and Voronoi pattern in rhino
I am not expert on Grasshopper yet. you can check out this instructor. Gediminas Kirdeikis
@@PJChenJewelryDesign OK, I try thanks 😊
Hi! Thanks for your great tutorials! I can't find "bridge" command in rhino 6. Is it not the right version? thanks!
That is correct. SubD only available in Rhino 7
Hi PJ! Thank you for the video. I have a problem with my bridge command. every time I click on bridge and then on filter faces a chart comes up and I have to choose the choices and then when I select the faces on the ring nothing happens. they turn yellow which means they are selected but when I press enter nothing happens. I don't know why.
you will need to select two set separately with enter in-between.
Hi PJ,
I'm mostly working with STL scan files, like to know is there anyway to convert smooth surface in Rhino, I've tried meshtoNurbs command but not working as I want . Thank you
Not that I know of. beside try to QuadMesh to SubD. You may need to rebuild the model from the curve extract from mesh
@@PJChenJewelryDesign thanks PJ
Hello, I have a question about how I can change the dimension of the ring to adapt it to different numberings without having to redo it from 0 for each of the numbers?
if you are talking about ring size. it depends on if you have the stone on it or not. you can 3D scale it up and down 1 size without notice much about the thickness. if you have stone. you need to rebuild the ring. As long as you have original curve on. it should not take too long to rebuild.
Hi PJ! I came again☺️☺️☺️ I saw a other TH-cam video from McNeel and he drew a circle, then make it a subd friendly curve, and then enlarge it outbound for the thickness of ring with a gumball..?? I followed samely, but my subd friendly circle doesn’t allow me to create a surface with a gumball.. ?
th-cam.com/video/a_12YDKu0bE/w-d-xo.html
Around 8:30
you can extrude with the "dot" on gumble. it is in th middle of arraw when you pick up the curve.
@@PJChenJewelryDesign thank you for your reply!☺️☺️ yes, I can see the red/blue dot in the middle of arrows in the gumball as you said and It is extrusion for tubing it.. what is in the video is for the thickness of ring.. in the video, he just turn the crv into. Subd friendly curve and then drag the square at the end of gumball and it makes surface outbound from the circle??? could you watch the video? It doesn’t seem to work for me..
Oh I found it it is shift and command for mac!!!
Hello PJ, when I select the faces then hit enter it says : "Bridge end has to be within a single object" What am I doing wrong, I cannot get them to connect, I am using Rhino 7
the two side of object to be bridge should be the same object ( either edges or faces)and the same number.
i can rhino 7 pleaze
axper sxal es targmane asa ess targmanem qez asem vor du noric gres ed mardy jogi
Здравствуйте. Как стать спонсором? И какая сумма взноса?
TH-cam Memberships are currently available to viewers in 69 countries, and TH-cam will continue to expand to more countries. If you don’t see the JOIN button. You may not be in one of the 69 countries. it is USD$4.99 per month.
Also, the JOIN button may not be visible on some videos and on iOS, but TH-cam is working to make it more widely visible. In the meantime:
Viewers in eligible countries can become members of the channel by clicking the JOIN button on the channel page from a computer. Viewers who become members on a computer will get access to membership perks on all platforms.
Please use Chrome browser
If the JOIN button doesn’t show up, please use the following link th-cam.com/channels/R3Dddx8nw4CYSkKmlvzXiA.htmljoin
i am have design can you show me how to make this ?
what design?
@@PJChenJewelryDesign
You have email to send desgin photo ?
Dear PJ, thank you so much for this very helpful video. I would love to subscribe to the sub D course, but it is a bit expensive for me as I'm a student. Could you let me know by email when you'll do a discount for this course? Thank you
It is currently running a discount for $50 off till end of Sept. You can use coupon code "WebSubD50". It is 20%off.
You are expert
Thanks for helping people to use this technology
I have question for you is any E-mail adress ?
pj@pjchendesign.com
But this is Rhino 7....?
yes. SubD is in Rhino 7
who can give me rhino 7?
You can download 90 days free trial at www.Rhino3D.com