Misalignment Spacers Explained
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- One of the most confusing things to some of our customers are misalignment spacers. Which ones to use, how to use them, what the differences between them are, etc.. In this video, Connor will try his best to clear it up for you guys.
- ยานยนต์และพาหนะ
Awesome info, I'm learning about all this off road steering stuff so this video helps a ton
Great, if you need anything just let us know!
Great explanation 👌
I've started a build list on your site!
Awesome, let us know if you have any questions!
Laz recommend this channel.
Thanks for checking us out!
Do the safety washers allow for slight articulation?
Thanks
If I have UCAs that are bad angles from a coil over and taller spindle, will a uniball and high misalignment solve ride quality and prevent spindle smackin the coil?
Can you torque these guys or will they bind if too tight?
You really just want them good and tight.
It would be better if you can provide pivot angle say 10degree or 30 degree as it will help me allot to design suspension.
If you take a look at our mis-alignment spacers on our website, you will see each one has the degree of misalignment that can be achieved in the description.
Could it ship to uk or India
Yes
Is there pay on delivery
Also can I buy B4WK0062 MODEL 3/4" HEIM JOINT FROM YOUR SITE
@@shyamricky597 No
@@prakascv8515 We sell all our heims individually as well!
I tried replacing my misalignment spacers on my heim jointed steering. I unscrewed the nut on the 3/4 in bolt and cannot slide the bolt out of the spacers and heims. How do I remove the bolt?
May be a obvious question, what tools have you used to try and get the bolt out? It’s typically always a good idea to throw some anti-seize on your bolts before putting them in.
@@barnes4wd I’ve used a hammer and no luck. Though my next thought is to use a jack to apply upward force to the bolts on each end of the knuckle. Any suggestions?