My Lifted CRV Gets Off-Road Tires and New Wheels - 2001 Honda CRV AWD
ฝัง
- เผยแพร่เมื่อ 23 มี.ค. 2020
- Find the parts in the video below!
ASR Lift Spacers - jhpusa.com/products/asr-cr-v-...
Motegi Wheels - amzn.to/2xjwgIC
Firestone Tires - amzn.to/3dmLU6H
Westin Safari Light Bar - amzn.to/2WHSfnz
Help support my channel, purchase decals here - garagebuilthondas.bigcartel.com
My GoPro - amzn.to/2YQ3OGZ
My Mirrorless Camera - amzn.to/2HzzFFT
Send me stuff here!
Jon Widmer
PO Box 13594
El Paso, TX 79913
/ garagebuilthondas
Thanks for watching!
Disclaimer
"Due to factors beyond the control of Garage Built Hondas, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Built Hondas assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. Due to factors beyond the control of Garage Built Hondas, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Built Hondas."
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll potentially receive a small commission at no cost to you. This will help support the channel and allows us to continue to make videos like this. Thank you for you support!
#MotegiMR148 #Firestone #ASRliftSPACERS - ยานยนต์และพาหนะ
![[안방1열 직캠4K] 베이비몬스터 치키타 'FOREVER' (BABYMONSTER CHIQUITA FanCam) @SBS Inkigayo 2404707](http://i.ytimg.com/vi/Tn3bGHiBWkg/mqdefault.jpg)
Once you are done with all those upgrades sell me the CR-V lol
Does it still have the original iVtec in it
No, this generation has a b20 non vtec engine.
I enjoy it, drives like a normal cr-v still. I don't take it off road hardly but great as a daily.
👍
@@GarageBuiltHondas have you added any of the stuff you stated at the beginning of the video? Haven't seen any update videos, for a daily and off-road crv what all would you recommend, thanks!
Love it! Keeping the older spirit of Honda burning 💪
Trying to!
Sounds like spirit and oil mean the same thing, lmao.
Been wanting to do an off-road CRV of that body style for a while.
Really cool easy mods that will make the CRV more of a beast than it already is. I love that front bumper bar so nice.
Very nice! Really been wanting the older crv as of late and even more motivated now that you've been making some more content with yours. The new garage is awesome too fits in well. I've Learned a ton through your videos with your help made it possible to do my first auto-manual swap and dpfi- mpfi swap as well in my crx. Always looking forward to your next video!
Love to hear it!! I enjoy my CRV more than I thought I ever would. It's been so practical as a daily driver, I love it.
great video Jon. love the look of the crv now..total transformation.. Hope you and your family stay safe during these difficult times.
Likewise Adam!! Thanks for that!
Working outside is the best choice providing the weather is good
Soooo sick! Looks perfect Jon! The wheels look perfect with the ATs. Can't wait to get down there with the wagon.
I don't care what people think. Those A/T's looks awesome on those Motegi's. Love the color too. With the sacrifice bar, It really adds to the look of your CRV. Good choice.
Thanks Markus, I absolutely love the look!
Man..so freaken happy that I came across this cool video..Thankyou a bunch
I love how clean your garage is!
Thanks man!
Love crv’s definitely getting one as my first car and customizing it myself
With no customizations its the ultimate cruiser. With a lowering kit, racing wheels, and HP mods it becomes a sleeper. With a lift and off-road wheels, (maybe some attachments to haul gear), it becomes a great off-roader. With attachments to haul gear and a roof tent it becomes a great camper. If the tranny dies (which is pretty much impossible), you still have a B20 engine that will make many honda cars, and the miata, sleepers.
The CRV could not possibly be a better first time vehicle. It works in bad snow / rain too.
Great vid Jon. Always love the demos and camera angles at the end so we get a good view of what it looks like driving .
I feel like it needs to be added and I'm glad you pointed it out and noticed. What good would it be to have a somewhat off-road setup and not take it off-road? 😃
@@GarageBuiltHondas btw. It's me. The guy with the blue EF sedan and green EF hatch on IG. Lol
Cool video man I'm a CRV lover myself I've got a 2003 crv with the k24a1 and it's also a manual, nothing crazy done just a lot of personalization, wheels,tires,bumper bar,light, cool vehicles and definetly a unique one to build up. Big Respect!
A great video on good lift kits modifications and after market tires ( P215,75R15-100S -Firestone Destination AV, control arms,new power steering pump . Like the wheels. Safari light bar is a nice touch ! Ball joints are a good investment.
👍🙏
bro I dont comment on alot of videos or even like lifted vehicles that much.....but I respect your work ! I like your camera work and explanation while working. Stay true to you! I'm a fan. keep it up.
Always trying to keep it entertaining and informative. Thanks for the comment, these mean a lot to me!
You inspire me. I love seeing it in action man
Thanks man, I had to try it out a little bit!
Great work Jon as always dude keep them videos rolling n keep up great work
Can't wait to see when you work on the suspension on the CRV.
Soon enough! I need to!
Not gonna lie,I like how it sits with them new wheels.
Looks good! Can’t wait to see you install the other parts
Soon!
Great videos man! I’m a huge Ef guy (ex sedan) and just got a crv 5 speed . Love how detailed you are ! Keep it up 👍
Thanks Julio, I'm kind of a nerd. Lol
Sweet my wife doesn't want to get rid of hers cause it has a small table in the back for camping 🙄 so I'm going to have to do something like this eventually. Thank for the video.👍
Absolutely love the 1st gen crv. This one is super clean and now looks friggin bad ass! So jealous lol
Thanks Graham
Loving the crv build need more!!
Thanks, working on getting some work done to it!
My partner has a completely stock CRV just like yours but in gold, recently clocked over 300 thousand kms and it still goes strong you can't beat it
That's fantastic, I hope I get many more miles from my CRV. 👍
Love builds like this. Keep it clean 🤙
I'm trying man!
Ngl, a lifted first gen CR-V is one of my bucket list cars. Awesome job on this one!
Thanks!
Love it bro! cant wait to start working on mine
Let's go!!
Awesome upgrades, love the new look.
You and me both!! 👍
Good stuff. I really like how it turned out!
Thank you
I love your style in wheels Jon! They look really good on the CRV bro with the tire set up as well.👍🏼👍🏼
Thanks brotha!!
CRV, finished in this episode, looks awesome.
Thanks Pete
Always solid content brotha. Rims are super clean. Nice contrast.
👍
I Love It man, you living the dream
Ha! You weren’t joking about having the video up in 10min. It’s looking good! Keep it up.
Lol
Great job.
Those rims are sick well done 👍👍
Thanks
This is your first video I see and saw your description and see that you’re from the west side of town. I’m from the northeast side of town and I was on the west side of town last weekend and your ride looks better in person.
Thanks buddy!!
Great video! nice little Crv you got there man! keep it up!
Thanks! Will do!
I seen a guy that came in for a alignment after he raise his CRV. Didn't really use spacer. Just stacks of washer to just bring up the body of the crv, but leave the suspension at normal high. Even put washer at the motors mounts.
Great video very helpful. Your cr-v looks the way I want mine to look not like a big wheel
Do it. You'll enjoy it!
I'm about to buy one, it will be my first owned car, bought with my own money...looks like it's gone be fun!
Excellent choice, hope yours treats you well.
it looks amazing Jon turned out great!
Thanks Ronnie!
215/75r15 Firestone Destination A/T are such an underrated set up for CRV's. Running mine on a 2nd gen, no lift, stock wheels, no rubbing. Absolutely no traction issues on the trails at 18 psi and a little momentum.
Any effect on the speedo reading? Looking to change the tires. Just that bit bigger. Thanks.
@@ob1488 mine read about 3 to 4 mph slower. It doesn't bother me.
hey, i just got some 215/75/15 toyo a/t’s for my 1st gen crv. do you think it would fit the same as the firestone without lift?
@@connorl.8944 Not sure about the 1st gen, ive read people having to use wheel spacer or different offset wheels in some 1st gens. But plenty of room in the 2nd gen to run 225 or probably even a 235
Nice work man!
Thanks! 👍🙏
I love the classic Honda CR-V. You did a good work on her.
I'm trying, glad you dig it!
@@GarageBuiltHondas Well, thanks. Cheers from Chile. And stay safe of the Coronavirus.
@ thanks, you too!!
Looks awesome.
Thanks dude!!
Sweet! 🤙
I added 18" rims to my 2000 CRV. I like the lift, but i wish I'd went with those lift spacers...Nice Work. They have a bumper spray to restore that bumper...
Throw some on still, itll lift it even higher.
No doubt. With a little more homework, it looks as if I could actually do it myself. Thanks for the quick idea. I know it's gonna make a helluva difference
the wheel setup looks so sick!!! I want to do something similar to my crv!
Do it!
I'm already bored of these wheels, might be time for something new.
From paved course to dirt.. this can only mean one thing: RALLY CRX!!
Man, I want to someday!
Going in the same route, I have everything just need time to put everything together. CRV gang💪
Is that what you were wanting me to work on??
No, I want to do the timing belt and water pump. I am disable veteran and there some stuff that I can’t due to my injured. But I do have all the suspension parts, wheels tires, and some other stuff for the off-road. I don’t see a lot of people building CRV on El Paso that why I ask you before.
You'd like me to do the timing component kit like I did in my video?
Yes, and more if is possible lol like I said, I am building a off-road CRV too and would love to have someone with the same goals helping me out.
Let me see what I can do. Do you have all the parts?
yes it does look fantastic
Looks awesome love the Content.
Thank you!
good to hear that the mpg hasn't been affected much ...the 215/75/r15 is 5.2% larger than the stock diameter, and so it also affect the speedo and mileage count on the dash... so if you plan to manually calculate the actual mpg, don't forget to put that into the equation ...but if you're using GPS to calculate, then it's accurate enough ....very nice looking simple build, tho ....planning to get myself a 225/60/r17 and 2 inches lift for mine so now I know how it would like on around 5% diameter difference ....currently running 215/55/r17 on H&R lowering kit spring
Definitely. I use tiresize.com and they have a calculator there to adjust for the mileage discrepancy.
Man, that's one beautiful 👌V💯
Wish I had your knowledge & expertise.... would love to work on mine like you do ....
Thank you. Just get outside, turn some wrenches. You'll learn very quickly.
Yes crv stuff just got mine back lend it to a friend
Lucky friend!
Cool video thanks dude... great video... Go CRV anyone go... Go Honda go...
Thanks 👍
Dude, those are rad!
Thanks!
I like the wheels and love a lifted CRV.
👍
Looks great!
Thanks Dale
Love the look
Thanks Joe
looking great! The tires alone just make you want to take it off road
It's more fun than I thought it would be!
Nice man!
Thank you!
I lifted mine 3" with 32" cooper discovery off roads 7.5 wide 15 rims with negitive 27mm offset. I get people stopping traffic to tell me how much they love it . I also put a spit fire shark face on the side of it lol
Nice! They are solid vehicles!
@@GarageBuiltHondas ya sat over the winter now i have a rough idle and acceleration so hoping to have her sorted out for hunting season. Also i call her the cerv- x lol hahaha
😁
Looks dope as hell jon!
Thanks Will!
i need one of these for snowboard trips asappp
Do it!!
That's a clean CRV.
Thanks
I love that you just dont focus on ef's, but also other honda chassis. Crv came put great btw. I like the 2019 crv wheels and want them on my 06 Crv. I wanna put some thick boy tires on those oem wheels on a lift kit.
I'm trying. Got some other content soon too, but my bread and butter is ef`s. I bet your setup your planning on will look awesome.
I have an 04 and I'm thinking about some newer CR-V wheels or Civic Si wheels next time it needs tires. Some 17" with 225/55/17 would be nice. Those pie cutter 205/70/15 are the week link in the handling.
Those wheels are actually pretty cool
Thanks dude!
Wheels look great !
👍
Looks slick 😎
👍✌️
great video. love crvs
Likewise!
it looks really koo ...well done
Thanks for checking it out!
Looks good!
Thanks broski!
Awesome looking
Thanks 🤗
Honda CRV first gen !🙌🏼🙌🏼🙌🏼 I got two and I enjoy working on them
Awesome!
the 2001 doesn't have 16's? I wanted to slightly go up to a 70...215 x 70 x 16. But the app says the tires won't fit. but I'm still going to buy AT's later. Mine is a 2005 CRV w the real time 4wd.
Thanks for info bro
👍
My daughter just got an 03 CRV as her first car. I’m so stoked it’s AWD. I think I’m more excited than her!
Lol, nice
Salute looks more intimidating than the Coronavirus itself!!! Nice.....
Lol
Looks good I lifted my 2nd gen last month I went with the same tire size stock rims on ko2s
Thanks dude!
5-6 extra pounds per wheel may not sound like a lot at first, but to anyone considering this modification, keep in mind that they are unsprung weight (weight not supported by the suspension) and rotating mass (rotors, tires, wheels). Depending on the extremely and applications for your choice (offroading, driving in regions with curvy roads, highway acceleration) adding bigger and thus heavier tires and wheels can have a significant effect on your driving performance and handling.
Very true, and insightful. Thanks for taking the time to help out with this info. 👍
Honda is a Great Machine !
Yup! 👍
bro those motegi are fire
borowski! I love em!!
should have TE37 instead.
@@mrj0hnster like I stated in the video, I'm not buying wheels that are the price of my crv. Even used you're lucky to find a set for 1500. Plus, this is a first. I've seen a bunch of crvs with TE37's or Rota Grids (TE rep) which is what I wanted to avoid.
It is looking nice with those Bronze Rims , I have same pattern for my civic, They never get out of style👍
Right on!!
that's an interesting build, I like just because it's different 😉
Thanks!
great build
Thanks!
Looks good! I never see CRVs with wheels and tires.
Thanks, trying to keep up with your beasts!
I'd love to see se new videos of this with your suspension upgrades/repairs. Also a list of part numbers for all of those bushings would be awesome.
Jon, any recommendations for simple junkyard upgrades to the CR-V B20? I'm thinking other intake manifolds, bigger throttle body from an Integra, etc., just this type of thing. My CR-V is my camping buggy and DD.
I'm hoping to be able to work on those videos soon. I'll have part links when those videos are out in the descriptions.
I wouldn't touch the stock engine personally. The Integra parts I doubt would make any noticeable difference. A cold air intake along with a header would probably be your best bet to make a little extra power as these crvs could use any they can get.
Not from El paso but was stationed at Ft. Bliss now I live in El paso, TX👍 pretty affordable living
It really is, tough to beat the home prices and cost of living here. Plus it's super chill.
El Paso is an awesome city.
good looking CR-V, looks like a nice low budget project.
Thanks! It definite is!
Love the honda and those wheels
Thank you!
Been looking for the perfect AWD suv with great gas mileage, FOUND IT!
👍
My friend reached over 300k on his. The motor still ran but they retired the body due to rust.
I love crv, my 5th one
Look awesome bro... So you know u don't have to worry about that back tire rubbing, it'll never happen because of the geometry of the suspension!!!
Thanks man, I love this damn thing!
I would love to do a head to head challenge off road in my 2000 GMC jimmy sle for fun...I love putting nice parts on my jimmy and it's nice to see someone else that is into there 4 wheel drive vehicle to
I'm down! You might beat me ugly but itd be fun as hell!
Awesome! It reminds me of the lifted CRV that I had. Just a few notes, axles might be an issue when you are flexing the suspension, recommend usage are KSeries axle since they are bit longer and help with that issue. Another thing too is using nitrogen instead of air lower weight and help with MPG.
Very nice, thanks for that input. I've read the 1" lift doesn't cause any issues. It's been 2 months and no issues so far.
@@GarageBuiltHondas still no issues?
NAPA axles also.slightly longer i heard.
LOVE IT
Thanks!
Yes I love the first generation crv, bought 2 last couple years but those 2 r older 97, first 1 crank but no start couldn't figure whats wrong, replaced distributor, coils still didn't start sold it for 400, 2nd 1 bought for 1500, drove it 2, 3 months transmission slipping then sold it, and now got another sporty red 1 with spoiler 145 k miles
Nice, keep on upgrading!