Artemis CP2 | Disassembly

Artemis CP2 air gun disassembly | Rozborka vzduchovky Artemis CP2
If you like the video please give me thumbs up or subscribe. This brings me some motivation to make new content. Thank you :)
#artemis #cp2 #disassembly #airrifles

[@laurentblanchard522]

Hello ! Where i can buy this red dot ? It's a 11mm rail ? Merci beaucoup !

[@SKAirgunner]

Hello. I bought it in the local airsoft shop for 25 euros. But you can buy pretty the same at aliexpress.com. Yes, it's 11 mm rail.

[@Knightberit]

Damn i had mine for a day and i was trying to set the trigger travel, you should be able to do so without taking stock apart, buti i couldnt see the grub screw, and thought id push the safety so it went to the other side so i could maybe see better...well the safety got push all the way out, which sent springs pins and the part of the assembly flying ... im not sure yet if i even found all parts ...

[@SKAirgunner]

Sometimes, it's tricky. Good luck :)

[@mauriopiaatti8459]

Hello sir. 2:25 Do you have an estimate how long the co2 housing tube is? from the front cap to the end bolt

[@SKAirgunner]

Hello. The steel tube has exactly 241 milimetres.

[@dudestyle01]

Had to change the O-ring at the Co2 pierce today.
This video saved me some real heartache... 👍✌️

[@SKAirgunner]

👍🏻

[@washingtonribeirosantos233]

Muito bom. Obrigado pelo vídeo, melhor vídeo abrindo de desmontagem q eu encontrei no TH-cam ate agr

[@SKAirgunner]

👍🏻

[@mellie2003]

Disassembly starts at 1:53

[@WrongTimeWatch]

How is the cheek weld with that stock and your red dot?

[@SKAirgunner]

Hello. I'm sorry, your question is not clear to me... What do you mean? Red Dot is fixed to the 11 mm rail with two screws. Is this what you are asking for?

[@WrongTimeWatch]

@@SKAirgunner do you have to put your chin on the stock to see through the red dot?

[@SKAirgunner]

@Wrong Time Watch No, you haven't. You can see red dot and shoot even if you hold the gun like pistol. Red dot works well as short and long eye relief.

[@mellie2003]

It looks non-existent to me

[@johnnybbgunner2136]

How did you get that moderator off so easily?

[@SKAirgunner]

It comes out as easily as you can see in the video. This is first disassembly of my CP2. So, there was no preparation, or trick... 🤷‍♂

[@dudestyle01]

Dude you just unscrew it 🤔