This has got to be the best video about Jura machines. We have a C7 that we have learned to repair ourselves but it is videos like this that make it possible. Thank you for this.
This is the best jura impressa rebuild vid out there bar none. Just refurb'd a C9 without it (predecessor to C60, almost identical inside except for power switch at top and front coffee output section).. Would have been alot easier! Way to go @myworks
I own a Impressa E8. With careful maintenance and love, these machines can last a long time and make wonderful coffee. Thank you for sharing your journey with us.
Tausend Dank für dieses hervorragende Video. Konnte mich daran entlang hangeln und meine Maschine komplett zerlegen, reinigen und wieder zusammensetzen. Das Video verdient mehr als einen Daumen hoch
Suuuper film, dzięki Tobie udało mi się rozebrać, wyczyścić i ponownie zlożyć mój ekspres a co najważniejsze nie została mi w ręku ani jedna śrubka po zakończeniu pracy. Kawa znowu smakuje wyśmienicie....
Thanks for your clear instructions. My impressa C65 grinder had broken down, so I replaced the whole grinder unit and did a full clean of the machine as per your video. Took some time but it makes great coffee again!
I have an Impressa C5 which looks exactly the same except it is mostly a matt finish. I have taken it apart 3 times to clean it, but not as well as you have. If I had all of your tools, I would definitely try it! Thank you for a great tutorial
Thanks for this video and the one detailing the brew group disassembly. It took a few tries but I've managed to get my old Impressa F50 going again despite the 21269 cups made so far. It's well over 10 years old but still going strong.
I remember Jura had a service to send your machine in for a tune-up/clean-up for $280USD. I had to do that way and the machine came back working like new again. But this video was very informative in show what goes into cleaning out the machine. Thank you.
Vielen Dank für dieses super Video. Wir haben gestern unsere C5 komplett zerlegt, gereinigt und wieder zusammengebaut. Die Maschine läuft wieder super leise und der Durchfluss ist wieder wie zu Beginn. Und der Kaffee schmeckt auch wieder! Thank you for that great video. Yesterday we dismantled our C5, clean it and put it back together. The machine is running smooth again and the flow rate is as good as when we first bought it. And the best is, coffee tastes great again!
Danke für die vielen Videos, vor allem auch die zu den einzelnen Baugruppen! Ohne hätte ich die Brewing Unit wohl nie mehr richtig zusammen bekommen 😅 Ich kann mich auch vorherigen Kommentaren nur anschließen: sehr angenehm so ohne Hintergrundgedudel und Gequatsche. Einige Geräusche beim Zusammenbau sind durchaus wichtig. 😊
Thanks for creating the video, very useful! I assembled mine after I cleaned it and everything is working fine except for the brewing mechanism, when the gears turn it is much louder now, did I not assemble something right or do I need to adjust something?
Check the drive motor, it must be installed correctly! Otherwise the motor housing may break. And for assembling the brew group see my other video: th-cam.com/video/z2cnI2h4rVE/w-d-xo.html
Habe selbst jedes Jahr Vollautomaten die ich reinige und wieder instandsetzte von Freunden und Bekannten. Schlimmerster Fall war eine Imprezza C5, die stand eine Woche draußen im Regen und ist 10 Jahre alt. Hab Sie komplett überholt und Sie läuft wieder seit einem Jahr wie geschmiert. Mann sollte die Maschinen immer einmal im Jahr komplett reinigen, dann hat man lange seine Freude daran. Gutes Video, ordentlich gemacht. 5 Sterne
I just bought second hand Jura c5, but apart from this "LCD" it looks just like yours. Although it was serviced and this brewing module was replaced I'm about to do the same as you did. Thank you so much for sharing your restoration! Thumbs up & sub
Respect. Well done. I do it professionally, as an extra job. A few remarks. When repairing a coffee press. More silicone grease should be put on all moving parts and channels, it works smoother and wears less. changes and thus reduces costs. The engine of the coffee grinder should be blown out with compressed air to remove graphite from the wear of the brushes. All in all, great done if the contractor is an amateur. Bravo !!
Great videos. I have a Jura F7 Impressa that has worked flawlessly for several years. I removed and disassembled the brew group, thoroughly cleaned it and reassembled without difficulty. Looks like new. However, the coffee only comes out in drips now. The wand flow is normal. No error messages. Thank you.
@@yt.myworks Thanks for your quick reply. I disassembled and reassembled the brew group, ran water through tap to clear air and water flow is now normal. Another issue though is that the ground coffee does not empty into into brew group but gets gets hung up in the grinder chute. I had disassembled and cleaned grinder. The calibration marks were lined up and there is no obstruction.
Oh My God.. OH Mein Gott --- its a very detailed instruction and i am very pleased. I have always wanted one coffe machine like that but my budget is low. It so happen my neighbour jura e70 was Störung 8... so i look up and find out its the brewing part. I open up and found that they don movee smoothly. After watching your detail video , i opened up... and my guess is the rubber seal is so old and not moving smoothly. I ordered from amazon... now waiting to fix it up after receiving the rings. I am really looking forward. Thx sir.
This has to be an award winning presentation. It is fabulous. An example of clarity , efficiency and competency. Thank you. Is it easy to get replacement panels as you indicated?
Ich bin begeistert wie Sie diese ganzen Puzzleteile auseinander und wieder zusammen brachten. Mir wären wahrscheinlich sämtliche Teile übrig bleiben und funktioniert hätte die Maschine so wie so nicht. Sie machen das sehr professionell, was kostet so eine Wartung, oder so eine gewartete Kaffeemaschine ?
I have been using impress 55 when I was in KUWAIT and I declare it was an experience like living with good maiden . I Very see one of again my life. Here we are cheated hickory mixed coffee ,it is really not enchanting as pure coffee. Thank you all. Omar.
Fantastic tutorial .... never mind , I am sure I would have a bag of pieces left when I am done If you ever come to Canada and need a little entertainment , our machine would love a spa treatment like that too :)
I cleaned out my machine using your guide, replaced all the o-rings in the brew unit. Now I have an issue that it doesn't brew coffee from beans. Works fine with ground coffee, no problem. It looks like water can't pass through the coffee, and every time I get a message 'Open Tap'.
I accidentally didn't assemble the brewer correctly, so the ground coffe never got wet... I just rotated the part that is the outer cylinder and then the water ended up in the ground coffee as it should.
Dürfte ich fragen warum sie das Drainage Ventil erneuert haben? Ich habe das Problem, dass der Satz zwar feucht ist, jedoch kein Kaffee ausgegeben wird. War dies bei ihnen ähnlich?
@@ElaboratedGuess beim Brühen kam der Kaffee nicht aus der Vorgesehenen Öffnung. Ging also nicht durch das Kaffeepulver sondern pumpte am Drainageventil heraus. Ventil und Dichtungen getauscht. Läuft.
Super, super nice! Thank you for sharing your work, it is of tremendous help. One question I would have: is it possible to adjust the grinder to a finer setting? Would you recommend that, or is the risk of choking it too high? My machine's setting seems quite coarse, I see it on the puck which most of the times disintegrates.
Its amazing (& mesmerizing) to watch your skill at doing this! You have clearly done it so many times, you make it look effortless, when we all know its NOT, so that's a great skill you have in doing video too!! Also I appreciate you replies in the thread as to which machines/brands are using better parts etc. Its of course hard to tell from the outside of the machine where the money goes when buying one, but the complexity/simplicity of the construction gave me a new insight into this. Again thanks for making such an enjoyable video!
Fascinating. Nice work. Factory trained? Great machines, just had our E8 serviced. 6296 coffee serves in 3 years. Expensive machines to buy however worth every cent or “ rappen”
@Max Ross: Many Thanks! I taught myself everything by fixing my coffee machines. These machines can be used for a very long time with regular servicing. But as you say, a bit expensive to buy.
Very nice. I'm already afraid of taking apart our C5 which of course was bought as used. Sadly sometimes the water and coffee unit not transitioning, trying 2-3 times to switch from water to coffee mode but then it throws a full error. Somehow unplugging and plugging in again solves the problem but I'm afraid it will get broken and I will face a bigger problem. So I need to check it. We really love the machine. I hope I don't need to remove every single piece.🤞
@@yt.myworks Yeah that's what I'm gonna do. Managed to take off the outside cover today so I could exactly see what's the problem. The coffee holder(the small box in the middle) after grinding get stuck so the massive middle unit(with the white circular part) is trying hard to move it which causes the engine to stress and also put stress on the plastic itself. My guess is dirt or something stuck there or just broken. But sadly I really need to take it apart way more than expected. Your video will be the guide.
@@yt.myworks Any idea why the water is flowing through the frother and not the main? I can't get the coffee out of the system... Middle part is properly cleaned. Some seals have been replaced and still not working properly sadly. Did I miss some sensor or valve?
@@yt.myworks Had to buy a valve as it was completely broken. Bought a metal one. Coming tomorrow and hopefully will fix the problem. Overall I replaced 2 seals and clean the machine completely. The middle part of the machine which press the water through the coffee works seamlessly now. Let's hope the valve is the only problem now and I can finally drink a great coffee again.😊
You do a wonderful job, I can't believe how how great you work. You buff out all the plastic but why don't you buff out the stainless steel drip tray lids? I buff mine with stainless steel compound and they look brand new. Other than that keep up the great work.. Maybe a tear down and fix a Jura S8 so I can work on mine some day.
Hi, I also tried to polish the drip tray but with limited success. Polishing stainless steel takes a long time to remove all the scratches. In most cases it is easier and much quicker to buy a new one ;-)
I am in the process of disassembling and cleaning my Impressa C60. After using the hot water dispenser, I made coffee. The water went directly into the tray, grounds were dry - twice. After removing tray and grounds I am not able to reinsert tray, seems blocked in back. Troubleshooting ideas? Thank you for this well done video. It is graet,
Hello, slide the drip tray into the coffee machine without the coffee grounds container. After that, the brewing group should get into the right position. Then, make sure the brewing group is set to the starting position before installation.
Hi. Many thanks for this great video! I've cleaned my C60 exactly as you showed and reassemble the machine accordingly. But when I turn on the machine it doesn't wash. The brew group runs smoothly and no errors. Except no water is coming out of the front. I've run the cleaning program and no water comes out of the front either. All the water runs into the grounds. Any idea what could be the problem? I replaced all the O-rings. Only not the little valve (with the red cap) as you showed in the video. Could this be the problem? I hope if you can help me. Thanks in advance.
Hi, the valve with the red cap inside is a very important element in the fluid system but I would check the brewing group first. The mold seals inside the outlet valve must point inwards. In addition, the plastic cap must not crack on the metal pin th-cam.com/video/z2cnI2h4rVE/w-d-xo.html
Great fix it tutorial!! Thank you!! I have opened up my machine....the on off switch is not working. It is stuck. Ican find replacement alright . Meanwhile, I by passed the on off switch, but it short circuit the mains. What can be the problem? I noticed the electronic motherboard motherboard is a bit black. Would be great if you could point me to the right direction. Thanks in advance.
Hi great video! My jura has been spraying water out of the part you remove at 19:00 I was wondering if you have any suggestions to why/ and if you think buying a new valve will help?
Great video, I am considering buying a used X8, which is described as needing a new grinder by the seller. I don't know if this is common or it just needs a deep cleaning though. I haven't been able to find any tear down guides for the X8 or the similar looking X6 though :(
The Jura X8 has similar or even the same parts as an E8 EB. In the case of used equipment, you have to consider that other components need to be repaired or replaced, such as ceramic valves, brewing groups, etc. It would be important to know how many coffee cups the coffee machine has already made. Above 15K, you have to expect nasty surprises.
Great video! Started to tear my c5 apart due to clogged/sticky spout. Made the mistake of taking the grinder apart. Put back together as in video. Or so I thought. Not it only puts out hot tea looking water. Grinds are very not ground and super wet. Any tips Or tricks?
Hi, when tightening the screw (8:55) make sure that the plastic parts fit together properly. Here there are tongue and grooves that have to be plugged together, otherwise the grinder cannot be adjusted fine enough.
Thanks so much for your videos. I have a Coffee ena 7 machine that has an error (missing tray) showing on the screen, then no buttons can be pressed anymore and I have checked the switch connected to the tray but it works fine. according to you must check at where anymore. Thanks a lot.
Hello, to be on the safe side, you can swap this microswitch with another one that is installed in the machine to see if it is really OK. You also have to check whether the drip tray actually reaches the microswitch.
This has got to be the best video about Jura machines. We have a C7 that we have learned to repair ourselves but it is videos like this that make it possible. Thank you for this.
Well filmed, no irritating music, clear, careful, useful, and a great result. Well done, and thank you!
THANK YOU!!! You just saved me a lot of money. I own exactly the same machine and managed to repair it myself thanks to your video . THANK YOU!!! 👍👍👍
This is the best jura impressa rebuild vid out there bar none. Just refurb'd a C9 without it (predecessor to C60, almost identical inside except for power switch at top and front coffee output section).. Would have been alot easier! Way to go @myworks
Being an owner of an E80 myself, it is so satifying to see a Jura machine restored to its full glory!
I own a Impressa E8. With careful maintenance and love, these machines can last a long time and make wonderful coffee. Thank you for sharing your journey with us.
Tausend Dank für dieses hervorragende Video. Konnte mich daran entlang hangeln und meine Maschine komplett zerlegen, reinigen und wieder zusammensetzen. Das Video verdient mehr als einen Daumen hoch
Suuuper film, dzięki Tobie udało mi się rozebrać, wyczyścić i ponownie zlożyć mój ekspres a co najważniejsze nie została mi w ręku ani jedna śrubka po zakończeniu pracy. Kawa znowu smakuje wyśmienicie....
Thanks for your clear instructions. My impressa C65 grinder had broken down, so I replaced the whole grinder unit and did a full clean of the machine as per your video. Took some time but it makes great coffee again!
I have an Impressa C5 which looks exactly the same except it is mostly a matt finish. I have taken it apart 3 times to clean it, but not as well as you have. If I had all of your tools, I would definitely try it! Thank you for a great tutorial
nu am expresor,mi-as dori unul,insa ce a facut acest om se cheama magie.Felicitari!
Jura coffee maker seems to be durable and reliable rather than other brands...the build of the machine/parts look sturdy with qualities!
Fantastic and beautiful to watch a craftsman who cares. BRAVO and thank you.
Best video ever! I was hesitant to clean my C5 internals, but you made it easy and approachable. Thank you!
Thanks!
Many, many thanks!
Thanks for this video and the one detailing the brew group disassembly. It took a few tries but I've managed to get my old Impressa F50 going again despite the 21269 cups made so far. It's well over 10 years old but still going strong.
I remember Jura had a service to send your machine in for a tune-up/clean-up for $280USD. I had to do that way and the machine came back working like new again. But this video was very informative in show what goes into cleaning out the machine. Thank you.
You can buy a refurbished one for $250 but put in some elbow grease and save some money. About to clean my E8 - never been cleaned in 8 years.
Vielen Dank für dieses super Video. Wir haben gestern unsere C5 komplett zerlegt, gereinigt und wieder zusammengebaut. Die Maschine läuft wieder super leise und der Durchfluss ist wieder wie zu Beginn. Und der Kaffee schmeckt auch wieder!
Thank you for that great video. Yesterday we dismantled our C5, clean it and put it back together. The machine is running smooth again and the flow rate is as good as when we first bought it. And the best is, coffee tastes great again!
Das freut mich sehr und motiviert zum weitermachen. Vielen Dank!
Thank you Sir, I followed you step by step, excellent tutorial, and I lost only one screw!
I had an extra one screw left over. That must be yours. Hahaha. Sorry you lost a screw though. This is a great video to relax too. Mahalo myworks.
Danke für die vielen Videos, vor allem auch die zu den einzelnen Baugruppen! Ohne hätte ich die Brewing Unit wohl nie mehr richtig zusammen bekommen 😅
Ich kann mich auch vorherigen Kommentaren nur anschließen: sehr angenehm so ohne Hintergrundgedudel und Gequatsche. Einige Geräusche beim Zusammenbau sind durchaus wichtig. 😊
Thanks for creating the video, very useful! I assembled mine after I cleaned it and everything is working fine except for the brewing mechanism, when the gears turn it is much louder now, did I not assemble something right or do I need to adjust something?
Check the drive motor, it must be installed correctly! Otherwise the motor housing may break. And for assembling the brew group see my other video: th-cam.com/video/z2cnI2h4rVE/w-d-xo.html
Vielen dank für das Tutorial. hab meine c50 jetzt schon paar mal mit deiner hilfe geflickt. Das ding läuft immer noch 😄. Super video
Very helpful and clearly filmed step by step. Thank you
Kawał dobrej roboty. Profesjonalizm w każdym calu. Dziękuję za film
With this video I am able to disassemble the entire coffee machine. I am very grateful!
Tres bon travail de qualité je sais pas comment vous faites pour mémoriser toutes les vis et les pièces démonter
Vraiment bravo
Habe selbst jedes Jahr Vollautomaten die ich reinige und wieder instandsetzte von Freunden und Bekannten. Schlimmerster Fall war eine Imprezza C5, die stand eine Woche draußen im Regen und ist 10 Jahre alt. Hab Sie komplett überholt und Sie läuft wieder seit einem Jahr wie geschmiert. Mann sollte die Maschinen immer einmal im Jahr komplett reinigen, dann hat man lange seine Freude daran. Gutes Video, ordentlich gemacht. 5 Sterne
I just bought second hand Jura c5, but apart from this "LCD" it looks just like yours. Although it was serviced and this brewing module was replaced I'm about to do the same as you did. Thank you so much for sharing your restoration! Thumbs up & sub
Sehr schönes Video. Macht echt Freude, da mitzuschauen👌🏻❣️
Wenn Sie Kundenaufträge annehmen würden, wären Sie die Wahl Nummer 1!
Respect. Well done. I do it professionally, as an extra job. A few remarks. When repairing a coffee press. More silicone grease should be put on all moving parts and channels, it works smoother and wears less. changes and thus reduces costs. The engine of the coffee grinder should be blown out with compressed air to remove graphite from the wear of the brushes. All in all, great done if the contractor is an amateur. Bravo !!
Thank you for the valuable tips 👍
Great video! Thank you! You are the real German perfectionist!!!
Great videos. I have a Jura F7 Impressa that has worked flawlessly for several years. I removed and disassembled the brew group, thoroughly cleaned it and reassembled without difficulty. Looks like new. However, the coffee only comes out in drips now. The wand flow is normal. No error messages. Thank you.
Hi, it is important that the seals in the drenage valve face inwards with the open side. Also check that the valve pin is moving properly.
@@yt.myworks Thanks for your quick reply. I disassembled and reassembled the brew group, ran water through tap to clear air and water flow is now normal. Another issue though is that the ground coffee does not empty into into brew group but gets gets hung up in the grinder chute. I had disassembled and cleaned grinder. The calibration marks were lined up and there is no obstruction.
PERFEKT!!! Ohne ein einziges Wort- alles gesagt!!☕👍👍🏻👍🏿
very impressed of video - master work of restoring Jura back to original state 👏👏👏
Oh My God.. OH Mein Gott --- its a very detailed instruction and i am very pleased. I have always wanted one coffe machine like that but my budget is low. It so happen my neighbour jura e70 was Störung 8... so i look up and find out its the brewing part. I open up and found that they don movee smoothly. After watching your detail video , i opened up... and my guess is the rubber seal is so old and not moving smoothly. I ordered from amazon... now waiting to fix it up after receiving the rings. I am really looking forward. Thx sir.
Almost like watching service in progress of fine swiss watch .
Wow , still do not have enough courage to do it , will keep watching .
Thanks sooo much I thoroughly enjoyed just watching the cleanup, but also was able to use the info on my
Badboy C60
Nice video.. careful handling and good pace so we can follow. Best of all no annoying chit-chat and you've listed your cleaning products. Well done!
Wow, thank you for making this AWESOME instructional video!!!
Thanks for posting this and i'm going to try and fix my F90. Cheers old boy!
Thanks for making this video! I just used it to clean out my 12 year old C5.
This has to be an award winning presentation. It is fabulous. An example of clarity , efficiency and competency. Thank you. Is it easy to get replacement panels as you indicated?
Thanks for the nice words! Which panels did you have in mind?
@@yt.myworks Thanks it is the left front panel in silver which was the black one your eplaced due to a broken hinge tab.
Ich bin begeistert wie Sie diese ganzen Puzzleteile auseinander und wieder zusammen brachten. Mir wären wahrscheinlich sämtliche Teile übrig bleiben und funktioniert hätte die Maschine so wie so nicht. Sie machen das sehr professionell, was kostet so eine Wartung, oder so eine gewartete Kaffeemaschine ?
I have been using impress 55 when I was in KUWAIT and I declare it was an experience like living with good maiden . I Very see one of again my life. Here we are cheated hickory mixed coffee ,it is really not enchanting as pure coffee. Thank you all. Omar.
Wow! Amazing works. Very detailed, neat and tidy. Five thumbs up!
Fantastic tutorial .... never mind , I am sure I would have a bag of pieces left when I am done If you ever come to Canada and need a little entertainment , our machine would love a spa treatment like that too :)
Toll, besten Dank für die wirklich gelungene und verständliche Anleitung.
Viele Grüße
Tolles Video, jetzt weiß ich wie ich meine Jura C5 Warten und Instandsetzen kann.
Thank you, you just saved me 139 euros !!!! ❤❤❤❤
I cleaned out my machine using your guide, replaced all the o-rings in the brew unit. Now I have an issue that it doesn't brew coffee from beans. Works fine with ground coffee, no problem. It looks like water can't pass through the coffee, and every time I get a message 'Open Tap'.
I accidentally didn't assemble the brewer correctly, so the ground coffe never got wet... I just rotated the part that is the outer cylinder and then the water ended up in the ground coffee as it should.
Danke für das Klasse Video, somit konnte ich bei meiner Impressa F70 das Drainageventil erneuern. Sie läuft wieder super.
Dürfte ich fragen warum sie das Drainage Ventil erneuert haben? Ich habe das Problem, dass der Satz zwar feucht ist, jedoch kein Kaffee ausgegeben wird. War dies bei ihnen ähnlich?
@@ElaboratedGuess beim Brühen kam der Kaffee nicht aus der Vorgesehenen Öffnung. Ging also nicht durch das Kaffeepulver sondern pumpte am Drainageventil heraus. Ventil und Dichtungen getauscht. Läuft.
🎉 Super, nach Deiner Anleitung gewartet! Hat Spaß gemacht 😊 Danke
Super, super nice! Thank you for sharing your work, it is of tremendous help. One question I would have: is it possible to adjust the grinder to a finer setting? Would you recommend that, or is the risk of choking it too high? My machine's setting seems quite coarse, I see it on the puck which most of the times disintegrates.
The second half was so satisfying to watch :-)
Bardzo dziękuję za film. Dzięki Tobie udało mi się naprawić expres. Pozdrawiam
Great hands job and perfect video edit.
Thank you 👏☺️
Wauw, je bent geweldig. Dank je.. Groet Henk uit kampen ( Holland)
Its amazing (& mesmerizing) to watch your skill at doing this! You have clearly done it so many times, you make it look effortless, when we all know its NOT, so that's a great skill you have in doing video too!!
Also I appreciate you replies in the thread as to which machines/brands are using better parts etc. Its of course hard to tell from the outside of the machine where the money goes when buying one, but the complexity/simplicity of the construction gave me a new insight into this. Again thanks for making such an enjoyable video!
Fascinating. Nice work. Factory trained? Great machines, just had our E8 serviced. 6296 coffee serves in 3 years. Expensive machines to buy however worth every cent or “ rappen”
@Max Ross: Many Thanks! I taught myself everything by fixing my coffee machines. These machines can be used for a very long time with regular servicing. But as you say, a bit expensive to buy.
Класс, ВСЁ показал. Молодец! Пойду свою разберу......
Thank you very much. Your video helped me. You touched all details. Thank you
thank you for the video, it helped alot to clean my xf50
have a nice day
Megaaaa, genau das brauche ich an meine Jura vollautomat🥲
tolle Arbeit, bin gerade dabei eine WE6 auf Vordermann zu bringen. Jetzt weiß ich was mich erwartet :)
Thanks for the great brake down of the Jura
Really helpful for me
Good work.
Now the water has appeared under the Jura device, this weekend is good ...
Many thanks really enjoyed the content you have kindly shared
Thanks for this video! You helped me fix my Impressa C90 which is very similar to this one. I can have espresso again! Thank you so much! ☕
Super film, dziękuję za wielką pomoc. :)
Very nice. I'm already afraid of taking apart our C5 which of course was bought as used. Sadly sometimes the water and coffee unit not transitioning, trying 2-3 times to switch from water to coffee mode but then it throws a full error. Somehow unplugging and plugging in again solves the problem but I'm afraid it will get broken and I will face a bigger problem. So I need to check it. We really love the machine. I hope I don't need to remove every single piece.🤞
You have to take a lot of pictures to know afterwards how the parts were put together.
@@yt.myworks Yeah that's what I'm gonna do. Managed to take off the outside cover today so I could exactly see what's the problem. The coffee holder(the small box in the middle) after grinding get stuck so the massive middle unit(with the white circular part) is trying hard to move it which causes the engine to stress and also put stress on the plastic itself. My guess is dirt or something stuck there or just broken. But sadly I really need to take it apart way more than expected. Your video will be the guide.
@@yt.myworks Any idea why the water is flowing through the frother and not the main? I can't get the coffee out of the system... Middle part is properly cleaned. Some seals have been replaced and still not working properly sadly. Did I miss some sensor or valve?
Did you connect everything to the valve correctly? Inside the valve the order is also very important 18:50.
@@yt.myworks Had to buy a valve as it was completely broken. Bought a metal one. Coming tomorrow and hopefully will fix the problem. Overall I replaced 2 seals and clean the machine completely. The middle part of the machine which press the water through the coffee works seamlessly now. Let's hope the valve is the only problem now and I can finally drink a great coffee again.😊
Thanks for the video, it's helped me a lot.
Super, na pewno skorzystam z pomocy tego filmu podczas serwisu swojego ekspresu Jura impressa c5
Great video. I like your sharp memory too. Thank you Sir
You do a wonderful job, I can't believe how how great you work. You buff out all the plastic but why don't you buff out the stainless steel drip tray lids?
I buff mine with stainless steel compound and they look brand new. Other than that keep up the great work..
Maybe a tear down and fix a Jura S8 so I can work on mine some day.
Hi, I also tried to polish the drip tray but with limited success. Polishing stainless steel takes a long time to remove all the scratches. In most cases it is easier and much quicker to buy a new one ;-)
Thank you so much, I cleaned mine and it work fine ;-)
Perfect and meticulous work
Despite aditional coffee sprinkling around for show, that was satisfying video
Wow, perfect job body👍.
I will try with my C5.
thx for video
Great illustration!!
Good job! It was really fascinating video!
Nicely done, love the ASMR
I wish I could've seen this before I broken down my Jura yesterday.
Merci, très beaux travaille de nettoyage et restauration.
I am in the process of disassembling and cleaning my Impressa C60. After using the hot water dispenser, I made coffee. The water went directly into the tray, grounds were dry - twice. After removing tray and grounds I am not able to reinsert tray, seems blocked in back. Troubleshooting ideas? Thank you for this well done video. It is graet,
Hello, slide the drip tray into the coffee machine without the coffee grounds container. After that, the brewing group should get into the right position. Then, make sure the brewing group is set to the starting position before installation.
Hi. Many thanks for this great video! I've cleaned my C60 exactly as you showed and reassemble the machine accordingly. But when I turn on the machine it doesn't wash. The brew group runs smoothly and no errors. Except no water is coming out of the front. I've run the cleaning program and no water comes out of the front either. All the water runs into the grounds. Any idea what could be the problem? I replaced all the O-rings. Only not the little valve (with the red cap) as you showed in the video. Could this be the problem? I hope if you can help me. Thanks in advance.
Hi, the valve with the red cap inside is a very important element in the fluid system but I would check the brewing group first. The mold seals inside the outlet valve must point inwards. In addition, the plastic cap must not crack on the metal pin th-cam.com/video/z2cnI2h4rVE/w-d-xo.html
Your are great an artist. You did excellent worl. Congrats...💐
Great fix it tutorial!! Thank you!! I have opened up my machine....the on off switch is not working. It is stuck. Ican find replacement alright . Meanwhile, I by passed the on off switch, but it short circuit the mains. What can be the problem? I noticed the electronic motherboard motherboard is a bit black.
Would be great if you could point me to the right direction. Thanks in advance.
Is anything else working? Maybe the switch wasn't broken?
Gracias por le video. Es como el cine mudo, todo se entiende.
So far so good. What lubricant and sealers are used? One is a clear blue gel and the other is white. Thank you, again. Suzanne
Hi great video! My jura has been spraying water out of the part you remove at 19:00 I was wondering if you have any suggestions to why/ and if you think buying a new valve will help?
Thank You! Very well done video.
Great video, I am considering buying a used X8, which is described as needing a new grinder by the seller. I don't know if this is common or it just needs a deep cleaning though. I haven't been able to find any tear down guides for the X8 or the similar looking X6 though :(
The Jura X8 has similar or even the same parts as an E8 EB. In the case of used equipment, you have to consider that other components need to be repaired or replaced, such as ceramic valves, brewing groups, etc. It would be important to know how many coffee cups the coffee machine has already made. Above 15K, you have to expect nasty surprises.
@@yt.myworks Alright, I will ask the seller how many cups it has made.
man könnte fast sagen das du bei Jura gearbeitet hast :) wirklich sehr schöne Arbeit
what a boss, after seeing this its put me off taking the thing to bits
Wow very good my dear!
Wow. Das ist echt super!!! Respekt! Super Video. Danke :))
Thanks for the video…. Any chance i can share a video with you? I’m having issues with my Jura…. Leaks water out of the thermal.
Great video!
Started to tear my c5 apart due to clogged/sticky spout.
Made the mistake of taking the grinder apart. Put back together as in video.
Or so I thought.
Not it only puts out hot tea looking water.
Grinds are very not ground and super wet.
Any tips
Or tricks?
Hi, when tightening the screw (8:55) make sure that the plastic parts fit together properly. Here there are tongue and grooves that have to be plugged together, otherwise the grinder cannot be adjusted fine enough.
Thanks so much for your videos. I have a Coffee ena 7 machine that has an error (missing tray) showing on the screen, then no buttons can be pressed anymore and I have checked the switch connected to the tray but it works fine. according to you must check at where anymore. Thanks a lot.
Hello, to be on the safe side, you can swap this microswitch with another one that is installed in the machine to see if it is really OK. You also have to check whether the drip tray actually reaches the microswitch.
@@yt.myworks Thank you very much for your guidance
This video is amazing! Thank you so much :)
What can I say? I’m Impressa’d. Nice work.