My Amazon page! The gear I use here on the channel! - www.amazon.com/shop/metalcomplex Thanks so much for watching! You can support my channel on Patreon here - www.patreon.com/metalcomplex
I got one 2 weeks ago, it touched the tip of my left hand's middle finger and started bleeding like crazy. I used 3 quick clot packets to stop the bleeding. Elevated the wound and applied pressure. Sharp knife.
Love Off Grid knives. I have the Scorpion Blackout and it's one of my favorite folding knives. I would probably never of heard about the company if it wasn't for your channel. Keep rockin' the solid knife content. 🤘😎
The black Mamba is the smaller version of this knife but more expensive at $250ish m390. Theu are releasing the enforcer in 154cm at a little over $100.
I just got this knife in the mail today and OMG what a nice knife.Its my new favorite and will replace most of my other knives.Its 154cm now and they have and add on thier site for a smaller one
Thanks for the review! I love this big chunk of a knife! It's not an ideal EDC size for everyone, but it's not overly big like a Luzon. In my opinion this is a great size when you have a project to tackle where you will need to do a lot of cutting and want the convenience of a folder.
You can actually just screw the glass breaker (crowd tamer) out if u just throw a small rod into the hole and turn it or use players with a paper towel around like I did. I don't think it comes in another model yet. I will say its def worth the 100 even with the d2. It's one of the toughest knives I've used. Like u said, besteck def does a good heat treat. I also love their rapid fire line (and I am not a huge fan of assisteds) take a look at one if u haven't already. I have the cyote, and all rapid fire variations have cryo d2, and that has become one of my favorites. Thanx for what u do! I got a late start to the world, but you've made it very easy for me to learn a lot very quickly!
Got one of these a couple months ago. Man it's awesome. Ended up getting a Viper too. I opened up the pocket clip and it just kind of hangs in my back pocket, hardly know its there and it won't rip up my shorts.
I have a Viper and its actually been a surprisingly good knife the D2 (K110) holds an edge really well it's fairly easy to sharpen. There's times when I'll put away my Freek and carry my Viber
That nasty flipper tab on the Hinderer XM 24 is inexcusable for a knife at that price point. It's neither aesthetically pleasing nor comfortable to use. I'll take the Enforcer for $100 any day of the week over that.
I mean... inexcusable is harsh. There's purpose behind the shape (originally designed intentionally as a finger guard in the open position) - But I do agree it's rough on the finger. Hinderer doesn't seem to have an issue selling out constantly despite the design being 10+ years old... 🤷♂️
I actually like how when in the open position, it's literally locked into my hand, it's a better finger guard than any of my big fixed blades have. So the intention of it doubling as a finger guard is excellent. Also, I just light switch it, and don't have a problem with it. Remember, it also has thumb studs
If you're stripping screws, you're over torquing them (or they're made shitty). Nothing wrong with T6 (or any other fastener with a 0.066" diameter) knowing the knives that end up on your table, id say you're over torquing them. Also likely, you could be using shitty (or worn out) bits.
He had Wiha bits, which are probably better than the vast majority on the market...there are definitely a lot of soft/imperfect bits being sold at big box stores. I do know Kershaw used to use some pretty soft screws on their knives. The smaller bits and screws are easier to damage and over torque, no doubt.
My Amazon page! The gear I use here on the channel! - www.amazon.com/shop/metalcomplex
Thanks so much for watching! You can support my channel on Patreon here - www.patreon.com/metalcomplex
I got one 2 weeks ago, it touched the tip of my left hand's middle finger and started bleeding like crazy. I used 3 quick clot packets to stop the bleeding. Elevated the wound and applied pressure. Sharp knife.
I Love Off grid knives. I bought the off grid black mamba after seeing it in an LPL video and its one of my most beloved knives
Yes! I looked up off grid knives after seeing LPL's in the videos
Nice, got black mamba after being turned onto it by LPL
I love the blade shape 😍
This knife reminds me of a large Black Mamba, which is one of my favorite small knives
Love Off Grid knives. I have the Scorpion Blackout and it's one of my favorite folding knives. I would probably never of heard about the company if it wasn't for your channel. Keep rockin' the solid knife content. 🤘😎
The black Mamba is the smaller version of this knife but more expensive at $250ish m390. Theu are releasing the enforcer in 154cm at a little over $100.
I just got this knife in the mail today and OMG what a nice knife.Its my new favorite and will replace most of my other knives.Its 154cm now and they have and add on thier site for a smaller one
Thanks for the review! I love this big chunk of a knife! It's not an ideal EDC size for everyone, but it's not overly big like a Luzon. In my opinion this is a great size when you have a project to tackle where you will need to do a lot of cutting and want the convenience of a folder.
"I think it would a bee"...love that line!
I'm really into these guys, I have plans to buy the badger soon I'm excited
You can actually just screw the glass breaker (crowd tamer) out if u just throw a small rod into the hole and turn it or use players with a paper towel around like I did. I don't think it comes in another model yet. I will say its def worth the 100 even with the d2. It's one of the toughest knives I've used. Like u said, besteck def does a good heat treat. I also love their rapid fire line (and I am not a huge fan of assisteds) take a look at one if u haven't already. I have the cyote, and all rapid fire variations have cryo d2, and that has become one of my favorites. Thanx for what u do! I got a late start to the world, but you've made it very easy for me to learn a lot very quickly!
Totally agree with the 154 cm and 14c28n.
Got one of these a couple months ago. Man it's awesome. Ended up getting a Viper too. I opened up the pocket clip and it just kind of hangs in my back pocket, hardly know its there and it won't rip up my shorts.
Is it bad to want this knife just because the diamond pattern G10 matches the diamond pattern on my Sig Sauer P320?
Not at all. On the subject of gym equipment, everything I buy is in black. It’s more than ok to have an aesthetic to adhere to. 😅
Off Grid Knives could be the ultimate beater knives
If a Hinderer and a Protech Malibu got together and had a baby, this knife would be their love child. I like it....
I wish they did more titanium handles
I have a Viper and its actually been a surprisingly good knife the D2 (K110) holds an edge really well it's fairly easy to sharpen. There's times when I'll put away my Freek and carry my Viber
Big blade needs a nice sized flipper tab. It's perfect
help please mine wont close and I have cats
I really wish it wasn't impossible to get a black mamba. Thanks to LPL 😂
Here for the cross channel viewer comment thank you
Actually there is now a regular sized Enforcer!
Hey MC can you please try to get ahold of/review the Off Grid Knives Black Mamba? New version just released.
Great option. I like it.
Good Morning!
..offered in a different color..Red Dawn
Was really considering this knife until you said bearings. I've found that dumping sand regularly into my knives ruins the action of bearings. LOL!
MC, I think the smaller version is called The Viper lol
Just curious, is this a big knife?
That nasty flipper tab on the Hinderer XM 24 is inexcusable for a knife at that price point. It's neither aesthetically pleasing nor comfortable to use. I'll take the Enforcer for $100 any day of the week over that.
I mean... inexcusable is harsh. There's purpose behind the shape (originally designed intentionally as a finger guard in the open position) - But I do agree it's rough on the finger. Hinderer doesn't seem to have an issue selling out constantly despite the design being 10+ years old... 🤷♂️
I actually like how when in the open position, it's literally locked into my hand, it's a better finger guard than any of my big fixed blades have. So the intention of it doubling as a finger guard is excellent. Also, I just light switch it, and don't have a problem with it. Remember, it also has thumb studs
Hi MC, I love the scales on your PM 2 those are Awesome:))
Love it, pocket shredder for sure.
Hey man could you talk about the cold steel sr1 lite maybe?btw very cool big knife 😎
th-cam.com/video/PMfvwE-t9is/w-d-xo.html 😉
@Metal Complex How do you like the AD10 as a bigger edc? Great review btw. I almost picked up the offgrid rhino last week but opted for the triad😉
It's huge, but I love carrying it
Wicked for sure!!!
If you're stripping screws, you're over torquing them (or they're made shitty). Nothing wrong with T6 (or any other fastener with a 0.066" diameter) knowing the knives that end up on your table, id say you're over torquing them.
Also likely, you could be using shitty (or worn out) bits.
He had Wiha bits, which are probably better than the vast majority on the market...there are definitely a lot of soft/imperfect bits being sold at big box stores. I do know Kershaw used to use some pretty soft screws on their knives. The smaller bits and screws are easier to damage and over torque, no doubt.
Nice just got my Stickers, MC :))
MC, this maybe a silly question but what does OEM stand for?
Original Equipment Manufacturer
Eww missed that gotta comment again xm24 weights 7.62 ... thats awesome. .308 ? 7.62x51 ..
Heck yeah
Yeep
🤣 I'll just buy three 14c 28n hammers and be good to go! 😂
yooo