And dont mix in weak glass or weak plastic containers, heat produced during reaction has to potential to break glass and melt plastic. ( speaking from experiences)
Winchester INC. if you add copper to your acid wash the copper will bind to your blade giving it a copper coat. You might want to look into it a bit more as it does have a slightly different process to normal acid washing
Thank you very much for the instructions! I tried this today on my Tenacious. I used pure Ferrochlorid for 15 minutes and produced the stonewashed effect in a plastic container with rocks I collected on my tours in the woods. I used WD40 as a liquid and shook it by hand for 5 minutes. The blade could be a little bit darker in my opinion but the stonewashed effect turned out pretty nice. I put Flytanium Ti scales and a black deep carry pocket clip in titanium on it. Finally I sharpened it with the Spyderco sharpmaker - I liked it already before in its original state but now it looks absolutely badass. Best regards from the Black Forest / South Germany!
@@natelund2914 Looks like the EdgePro Apex, good system more flexibility for angles, thin blades etc than others I've tried. I use water stones on my camp knives but for day to day the EdgePro is pretty foolproof
Dude, Nice Quality! It's crazy how lucky I've been on finding good channels. Keep up the good production work! And kudos to you for all the neat work you've been doing so far!
The song when he puts the knife back together: My Great Undoing · Of Men And Wolves ... you can thank me later... BTW Great build man! Did on my Persistence and looking forward to build a Tenacious!
Thanks for no overcomplicaing things. For those of us without decent knife sharpening skills/equipment, do you reckon nail polsih on the blade edge would work too?
Nice job. You're pretty funny while giving great instructions. Hope you're still enjoying life. Hope your neighbor is well also.😆 Going to do this to some knives now. Be blessed, Leo 🦁 from San Diego ✌️.
Thanks for sharing! That was a fun one to watch. Is it weird that I impressed how well the audio sounded in the garage? lol Also congrats, you officially hit 100k, nice!
Saw this video and pulled the trigger - UPS left today and I stonewashed my "brand new" Gray FreeTiger FT903 afterwards ... It's even more of a beauty now👍🏼 I just subscribed to your channel!!
Thanks for the video. I just got an M4 Tenacious to acid etch. Also got some copper scales Im going to shipwreck for it. Im gonna look into that tumbler and media from Harbor Freight.
Always great content, and the production (video editing, music, etc) is 1st class. All that and you have a beautiful home- I really dig your style! If there's one thing I look forward to each week, it's something from you. And if there's nothing new, well, I replay one of the previous ones.
first video I've seen of yours and I instantly subscribed. Great video. Love how you give diy as well as money bought tips. Good to have both as I'm just starting out restoring blades and hopefully eventually forging my own. I actually have a knife I think this would look awesome on so thanks.
Awesome video! Thanks for making this available. I’m definitely going to have to try this. I love how you explain that it doesn’t have to be an overly complicated or expensive project. Just subscribed too.
Damn fine video. Love this dude. I’ve got two Emerson A100’s and will try it on one. Also have two H&K Nitrous Blitz and will try it on one of them possibly. Look forward to seeing your other videos.
Just found your Chanel and boy am I glad.. great content can't wait to pimp out my knife collection .. hope to see more knife videos with my subscription
Nice video and congrats on the 100k! Get that plaque! Now that you're 100k we need a Man Shit Monday, Man Shit Tuesday, Man Shit Wednesday, Man Shit Thursday, Man Shit Friday, Man Shit Saturday and you can relax on Sunday with the family! :P
Dude i swear I'm rolling over hear😂🤪😅my neighbor decided to do his yard, weedeatter I think...hes now at full rpm.....doesn't it seem like when I start talking he gets closer and revs up the rpms.... i swear that was hilarious 🤣 😂 😆
Knice vid bro. I sharpen knives for a living, so hats off to you. Spydies are a great blade as well. Also like Chris Reeves Sebenza 21s and any plunger locks. Cheers
God DYAMN, your videos are so good! I really wish you'd upload more often, but I know that, that will affect the quality of your videos and will make you unhappy if its something you don't love doing. But please do keep up the great work my guy! Subscribed awhile back after watching JUST ONE of your videos. Much love brotha!
I second Mark Mattews comment below. Could you do a full video on your knife sharpener please? Where you can get it, tips etc on how to get a really good edge on your blade would be much appreciated. Keep up the great work :)
Awesome job Jeremy. Those look sweet. Any chance of a video on how you sharpen your knives? Every time I try to sharpen mine, I wind up hacking them up. Love the channel man. Keep it up.
fun tip: do not put ferric chloride in aluminum containers. it will begin to boil and melt your aluminum container instantly. glass or plastic yall.
Bruh who would put a chemical that’s made to dissolve aluminum in aluminum
@@amonGustavo07 me. I'm that guy
@@amonGustavo07 you'd be surprised, there's too many dummies in the world haha
I know that from breaking bad
And dont mix in weak glass or weak plastic containers, heat produced during reaction has to potential to break glass and melt plastic. ( speaking from experiences)
Man I love this channel. The editing is great, the camera work is amazing, and the content is out of this world. Congrats on 100k man!
Thanks 😊
Alright, Congrats on 100,000 Subscribers. Now let’s see some ads on these videos!!!
Thanks! 😊
Acid etch is definitely my favourite finish on blades, especially when you put a mirror finish edge on them it just makes it pop
Man we need more people like you. You tell us what we need to know with no messing about. And you're hilarious! Keep it up mate 👍
Probably the nicest tenacious I’ve ever seen. Awesome vid man. 👍🏼
Thanks Mike 👍🏻
Try putting pennies it there for a copper wash it looks cool on a black blade
ORGANDONOR
Explain please 🤔
Winchester INC. if you add copper to your acid wash the copper will bind to your blade giving it a copper coat. You might want to look into it a bit more as it does have a slightly different process to normal acid washing
I did that. Even put a shit ton of copper in. Keeps rubbing straight off
Laeveld Paraatheid are you using pennies or actual copper. If your just using pennies it’s gonna take a lot of pennies and a lot of time...
Pennies are not copper anymore haven't been for a while!
Came across this looking to customize my edc but I’m staying cuz you’re funny as hell
Thank you very much for the instructions! I tried this today on my Tenacious. I used pure Ferrochlorid for 15 minutes and produced the stonewashed effect in a plastic container with rocks I collected on my tours in the woods. I used WD40 as a liquid and shook it by hand for 5 minutes. The blade could be a little bit darker in my opinion but the stonewashed effect turned out pretty nice. I put Flytanium Ti scales and a black deep carry pocket clip in titanium on it. Finally I sharpened it with the Spyderco sharpmaker - I liked it already before in its original state but now it looks absolutely badass. Best regards from the Black Forest / South Germany!
i’ve never watched one video of someone’s and subscribed, until now!😂 i loved the whole thing!
The lords work sir! The lords work!
Can you do a review of that knife sharpener? A how to?
What sharpener is it?
@@natelund2914 Looks like the EdgePro Apex, good system more flexibility for angles, thin blades etc than others I've tried. I use water stones on my camp knives but for day to day the EdgePro is pretty foolproof
+10 for this suggestion.
Came across this video in my edc youtube hole...fine job sir. Really enjoyed your simple presentation. No need to be overly scientific, just fun.
This is badass, im starting to really get into EDC stuff, love it.
Dude that's the most awesome tutorial here in youtube! Ever!
I've got citric acid it works well; I just leave the piece soaking over night to get a deep charcoal grey finish.
It turn out cool looking and those scales are nice also.
Wow. Very nice. That's what I should do to my knives.
Dude, Nice Quality! It's crazy how lucky I've been on finding good channels. Keep up the good production work! And kudos to you for all the neat work you've been doing so far!
Thanks 👍🏻
Oh my goodness!!! I’m super anxious, excited and hopeful we get a Man Shit Monday this week!!!
There should be one! Might be a man shit Tuesday though 😉
Testosterone Tuesday works!!! So excited!!!
The song when he puts the knife back together: My Great Undoing · Of Men And Wolves ... you can thank me later... BTW Great build man! Did on my Persistence and looking forward to build a Tenacious!
First time watching and i love it already
Thanks for no overcomplicaing things.
For those of us without decent knife sharpening skills/equipment, do you reckon nail polsih on the blade edge would work too?
Nice job. You're pretty funny while giving great instructions.
Hope you're still enjoying life.
Hope your neighbor is well also.😆
Going to do this to some knives now.
Be blessed,
Leo 🦁 from San Diego ✌️.
It just looks dope...
The best reason to do almost anything
Thanks for sharing! That was a fun one to watch. Is it weird that I impressed how well the audio sounded in the garage? lol Also congrats, you officially hit 100k, nice!
Thanks! Glad the audio sounded good. Might be the new mic I have been testing out. The deity D3 pro. Love it so far. Review coming soon. 👍🏻
Saw this video and pulled the trigger - UPS left today and I stonewashed my "brand new" Gray FreeTiger FT903 afterwards ... It's even more of a beauty now👍🏼
I just subscribed to your channel!!
Just started watching love it. You hit all the good stuff out the park
Alright alright, thanks for the lesson. Heading to garage now, 106 degrees right now in Laredo, Tx.
Thanks for the video. I just got an M4 Tenacious to acid etch. Also got some copper scales Im going to shipwreck for it. Im gonna look into that tumbler and media from Harbor Freight.
Pocket Knife, original fidget toy. Congratulations on 100k subs. Keep up the great work man.
Lol it really is. I fidget with my knife all the time. Thanks 😊
Just discovered this channel, I love the content and it's cool to see a content creator in the Jacksonville area
Always great content, and the production (video editing, music, etc) is 1st class. All that and you have a beautiful home- I really dig your style! If there's one thing I look forward to each week, it's something from you. And if there's nothing new, well, I replay one of the previous ones.
Should have a late man shit Monday coming out tomorrow. 👍🏻
BOOM!!! 100,000 . . . . . . CONGRATS, BROTHER!!!
Thanks 😊
Excelent vid, Jeremy. Can't wait to get started on this. I do want to wait till it's about 100 here in Tampa.
This guy cracks me up. Great content
Thanks brother!
first video I've seen of yours and I instantly subscribed. Great video. Love how you give diy as well as money bought tips. Good to have both as I'm just starting out restoring blades and hopefully eventually forging my own. I actually have a knife I think this would look awesome on so thanks.
Awesome video! Thanks for making this available. I’m definitely going to have to try this. I love how you explain that it doesn’t have to be an overly complicated or expensive project. Just subscribed too.
Congrats on your first 100K! Very happy for you and this 'sharp' channel!
Thanks😊.
Also, I see what ya did there. 😂 gotta love a good pun!!
@@JeremySiers - Keep making these cutting edge videos. They kick ass, any way you slice it. :)
Immediately like this guy. Lol thanks for the good info sir, and thank you for your service.
Rockin that beard brother...beard brothers unite...great video
Love your videos man, great quality.
Man that came out like a champ, PS send you neighbor my way, yard needs a trim!
Hello, great and funny video. Thanks a lot for your amazing instructions 👍
Awesome video dude. Great job.
Damn SON looks badassssssss!!!!! Big congratz on 100,000 Subs!!!!
Thanks 😊
Just finished stone washing my Ontario Rat 1, looks great! Also Rit Dyed the scales black. Thanks for the info!
Great outcome..... Love Spyderco blades. Subbed
Thank you so much. I have wanted to do this for years. I’m gonna now lol
That was pretty cool. Thanks for the knife finishing lesson!
Damn fine video. Love this dude. I’ve got two Emerson A100’s and will try it on one. Also have two H&K Nitrous Blitz and will try it on one of them possibly. Look forward to seeing your other videos.
Love the Molon Labe flag! We use to chant this with all football teams I coached!
Just found your Chanel and boy am I glad.. great content can't wait to pimp out my knife collection .. hope to see more knife videos with my subscription
"My neighbour decided to do his lawn", exactly when you need a knife!
First timer just subcribed. Your one entertaining dude.
I spotted that deck of monarch cards. Great video
Absolutely an amazing video. It’s criminal he doesn’t have more subs
I just got a Tenacious so now that I see this, I'm even more excited brother!
I love blackwashed blades and this one turned out great 👍
I like the look and looks very doable, thanks!
Awesome knife, amazing man! nice.
Nice video and congrats on the 100k! Get that plaque! Now that you're 100k we need a Man Shit Monday, Man Shit Tuesday, Man Shit Wednesday, Man Shit Thursday, Man Shit Friday, Man Shit Saturday and you can relax on Sunday with the family! :P
😂 thanks 😊
About to do this on my Satin blade BHQ Tanto PM2. Going to look sick!
Dude i swear I'm rolling over hear😂🤪😅my neighbor decided to do his yard, weedeatter I think...hes now at full rpm.....doesn't it seem like when I start talking he gets closer and revs up the rpms.... i swear that was hilarious 🤣 😂 😆
I'm not even into knives like that but I enjoy your content so much!
😊
Knice vid bro. I sharpen knives for a living, so hats off to you. Spydies are a great blade as well. Also like Chris Reeves Sebenza 21s and any plunger locks. Cheers
I might do this on my UK legal 2.5 inch unlockable Swiss Army Knife blade 😐.
Oh yeah, I’ve seen guys take apart their SA’s and do the whole tool set. Looks awesome! 😂
Oof..... I wish I couldn't say relatable
Like the humor, thanks for the great info.
Cool! I always wanted to make knifes. I was curious on how to get those finishes.
Well I'm definitely going to do that now. Looks awesome.
that came out extremely good!
Thanks! Great info and walkthrough.
Now this is quality content
Instantly subbed
Finally! A Molon Labe banner that's in the correct font. Have that on my left forearm.
God DYAMN, your videos are so good! I really wish you'd upload more often, but I know that, that will affect the quality of your videos and will make you unhappy if its something you don't love doing. But please do keep up the great work my guy! Subscribed awhile back after watching JUST ONE of your videos. Much love brotha!
Thanks brother! 😊
@@JeremySiers no problem my guy😜
Thanks for the video. Can’t wait to try it to one of my knives that needs a facelift.
*I like your videos bro... I especially liked the "clear ice" video. :)*
*anyway, just stopped by to say hi*
I wonder if covering the edge of the blade with nail polish and then tape would help protect it better?
That was awesome, definitely going to try this out!
Give it a go man, super easy. 👍🏻
I definitely drive my wife crazy sitting, watching TV, and Civivi flipping.
That's me she's always telling me to stop but I cannot civivi spyderco kershaw all are loud my elementum is probably the quietest
I second Mark Mattews comment below. Could you do a full video on your knife sharpener please? Where you can get it, tips etc on how to get a really good edge on your blade would be much appreciated. Keep up the great work :)
I third that request!
Thanks for the tutorial man !!!
Fellow magician? Loving those monarchs
Pretty cool knife and Spidey Flick. I thought that the Ferric Chloride would have eaten off the finger nail polish.
First video I've run across. Subscribed!
Great video....would love to a one on flame bronzing
Dude! I love it, I learned so much! Keep it up. Hey do an EDC episode.
Fanatic tutorial and congrats on 100k!
Thanks 😊
Bro 100,000 subs. Congrats! Been here since almost day 1. 6.6k to be exact.
Awesome Zach! Thanks for being an OG 👍🏻
Good video man thanks for the tips! Do i absolutely have to use ferric chloride ir can i use muriatic acid?
May have to get one of those tumblers. I’ve got a few I’m really wanting to wash
Awesome job Jeremy. Those look sweet. Any chance of a video on how you sharpen your knives? Every time I try to sharpen mine, I wind up hacking them up. Love the channel man. Keep it up.
Yeah, lots of knife stuff on the books. I’ll definitely do a little something on sharpening 👍🏻
Awesome channel.just wondering if i could i do this to the pocket clip to match the balde??
great video my guy. just did this to my benchmade two weeks ago
One of my favorite customizations! Looks great! Love me some Benchmade by the way 👍🏻
Congratulations on 100k my man.... I'm a Spyderco guy as well (flickin' all day)
Thanks 😊
Holy crap your in st. Augustine lol I just left there Sunday. Funny TH-cam made me stumble on your channel!
Congrats on 100k!
Thanks 😊
CONGRATS ON 100k!!
Thanks! 😊
Nice video mate. To stop the oxidation reaction of ferric chloride, I use glass cleaner with ammonia. 😁
Man Shit Monday.. released on Monday. Wow dude, you feelin' ok?
😂 I totally earned that 😂🤣