What temperature does the drum reach when set on high for an extended run? Can you measure it with an infrared thermometer? Maybe just open the door before it's done when it's warmest and point the thermometer at the clothes to get a reading. You could also measure the exhaust vent temp just out of curiousity. It might be good to know what's normal so you know when it isn't.
Hi. Excellent video. Finally someone made a video of how to exactly maintain a dryer and clean the filters. I wish alot of people who has a portable dryer sees this important video so they'll learn on how to maintain and clean the dryer inside and outside. Have you done a video on how to maintain a portable washer??? If you haven't it would be a wonderful idea to do it. Thanks alot
@ChicGreekGeek I changed my recommended link to another set of filters on Amazon that seem to be better quality. That's a shame there's poor quality replacement filters out there.
Do you know why a dryer like this would heat up and stop and restart randomly but it is not getting my clothes dry. Any suggestions or tips? Also could it be the thermal fuse and where is that located?
omg...thank you, thank you, THANK YOU for this video! I've only had this dryer since last summer and today it suddenly died. I had thrown out the disposable filter as you did and that was the problem. I couldn't afford to replace the dryer so I'm thrilled that this was such a quick, easy and inexpensive fix. Thanks again!
Oh no. Turns out this was NOT the problem after all. I've discovered that there is no air coming out of the back vent at all. Any ideas?? And yes, I took the back panel off and gave it a good cleaning...it WAS full of lint. Thanks
I love mine. I have a different model but pretty much the same. I usually put everything on 1 1/2 hours. I now use dryer sheets instead of fabric softener. It cut down drying time by 30 minutes. The liquid softener coats your clothes for those who dont know. My bath towels-4 at a time, are pretty thick and dry fine in 1 1/2 hours.
@@VacTech1 2 hours wow mine takes about 40 mins for a load of towels spun at 1400 rpm in the washing machine our appliances in the uk plug in to 240 volt plug sockets
@@theoddjobcentre6686 so my old washer doesn't spin nearly as fast, but 2 hours was prolly too long. I think it could have done it in about 80-90 mins. It takes longer, but still does the job well.
Super informative. My dryer cuts out after a few minutes, and after watching this video I realized I got rid of those filters a long time ago. This is exactly the information I was looking for, so now I know why it's cutting out. Thank you!
Thank you, my 4 year old panda dryer has been having issues lately. When i turn it on it stays on for 2 - 3 minutes then it turns off. I click on the on button or any of the other buttons but nothing happens. After leaving it that way in 15- 20 minutes later it would turn on and go through the same thing over again. I replaced the filters and the main one was covered in lint. It has been 3 - 4 months since I replaced it and I use the dryer about 4 - 6 times per month. I then took the back cover off and there was lint covering the motherboard and floor. I cleaned it but I also saw that the belt was broken. I got two from ebay hopefully next week i will get them and replace it. I hope this will fix the dryer I don't want to spent another 250- 300 dollars. has this ever happened to anyone ?
Thank you for your review. I've watched many and yours is by far the most detailed and showing how to take the back off and clean the interior was fantastic!
These dryers are amazing, mine is about 9 years old. Over time (maybe 4 or 6 years) the blower fan will become hard to turn. It will require grease on the brass bushing. The blower fan was not turning easily and had a little wear on the steel shaft/brass bushing bearing surface. It is not hard to disassemble and lube. Use a high quality grease, automotive type should work fine. Don't use oil or WD-40 because it won't last.
My plastic filter keeps falling off during drying. I compared my filter to yours and it looks similar but don’t understand why it doesn’t stay put. Any suggestions? I was looking for a new one but couldn’t find one for this dryer! Help!
Thank you for going the extra mile 🙌🏼 and teaching us how to trouble shoot & clean up the lint problem that can accumulate over time inside the metal back of the dryer with/without that important back filter. Other TH-cam review videos never even showed that 2nd filter or used it. I’m on the fence upgrading getting a compact dryer 2.6 or 3.5 but either way this video gives me much more peace of mind to tackle the lint problem if/when it occurs👏🏼 LOVE this video 🤩 5 stars!!!
Really helpful video!! Would love to see a demo on this same model for replacing the thermal fuse, I think the one on mine just burned out. It looks like I have to remove the drum to access and replace it. I bet you'd do an excellent job showing less handy folks like myself how to do that!
Thank you for this video! I used it for disassembly instructions for my Magic Chef 2.6 cu ft. dryer, which apparently uses all the same major parts and panels. I suspected that my blower belt had broken, and sure enough, it has! Thanks to you, I knew to look for and remove lint accumulations, which I will add to my annual maintenance schedule. Indeed, the two filters are important! But they're not catch-alls. Also thanks to your video, I confirmed that the felt collar at the back of the drum should be out all around: several inches of my unit's was tucked in (sucked in?) toward the drum in diametrically opposing areas, making it seem plausible that that's by design. It isn't! So if you have any advice about how to avoid that happening again, then I'd appreciate knowing it!
Hi im thinking of getting this dryer. There are 2 dryers in my apt. complex. It cost 2 dollars for 45 minutes. Work great but since theres only 2 i have to wait for ever to use them. Does this cost alot to run since tou drying for over an hour. What is electric bill like when you running this?. Thanks
It's incredibly cheap to run. I haven't noticed a major change in my electric bill using it. It'll save you money over time, and it's worth the convenience.
I can’t pull the small one out for the life me. Also my dryer dosent just go in one direction. It goes in clock wise and counter clockwise every other minute.
Oh that's neat that it changes direction! If you're trying to remove the small intake filter, try prying from the top with a small flathead screwdriver. I hope this helps!
@@VacTech1 I guess it is cool but it’s very loud when it stops and then switches directions. It also seems to not dry as fast. I feel when I first got it I set it in one direction. I dunno.
Great video, thank you for being so thorough! I actually bought the 2.6 cubic feet touch screen dryer about 2 weeks ago and its giving me an error message of "E3" I figure the panda dryers might be the same as far as the error codes but I can not for tge life of me, find one bit of info on this code?! I contacted customer service and haven't heard back yet. I'm hoping it's an easy fix bc everybody seems to be sold out now😬 if anybody knows about this please help a sister out!✌
@kphelps1605 I ended up contacting Panda and they told me to contact Home Depot for a return. Panda sent me a return slip to have me ship it back to them. Then when I got refund back from Home Depot, (they packaged it for me) then I had to take it to a fed-ex and send it off. Bought another style dryer I think from Walmart. The Magic Chef brand. It was a proccess but I @ the time needed a working dryer!
I have the black and decker compact dryer. It was working perfectly fine. All of sudden one day it decided to not turn on whatsoever. What do you think it could possibly be?
My Panda dryer only two years old..same thing. I'm more than frustrated and frankly furious. Very few appliance repair people will work on portable dryers and appliances...plus paying over $300+ for this dryer and it barely hit the two years mark let alone the 5-10 year lifespan the company contends. I'm a senior.. live alone..do laundry twice a month. Cleaned both filters faithfully every single load. Didn't overload the dryer...well aware of its limited capacity. I've spent all day searching for solutions to fix it myself if I can.. if not, I'll have to let it go. Will I buy this brand again? NO.
Wow thanks! I took out my extra filter too and now it's dirty inside. Oh, I took my dryer apart because it's making a slight bearing sound. My boat mechanic BFF said to just use it until it dies? 😆
My issue is the foam padding wore out. The belt is slapping against the metal now. Also, the part when the belt rotates near the bottom foot is creaking
Thank you for this - I watched the older one and remembered your lint problem, I'm happy I found this. I have a Magic Chef which is basically idential. But it stopped heating - if you have any ideas on why and read this and can share, it would be very helpful. I purchased the heating element from the manufacturer but I'm not sure that's the answer and haven't had the courage to open up the back yet.
Glad I came across this!! I have a similar dryer (different brand but almost exact same thing). I've had it for about 5 years and love it, but more and more often recently, the damn lint filter kept falling off during a cycle. Every 5 minutes or so until I got it secured in a sweet spot and it stayed on. It's been super annoying. However!! Your video brought to light the fact that I've had the filter installed wrong this entire time!! I swear when I got the dryer, the fabric (disposable / replaceable) filter was *inside* the two plastic pieces. The one I yours is exactly the same as the one in mine. Mine doesn't snap together the way yours does, but I'm wondering if it's supposed to. I just got out the manual for the dryer and sure enough, it seems to depict the order of installation the way you showed and not the way I've had it. The diagram is kinda unclear but looking at it the way you have it vs. how I had it your way makes more sense. I just popped it out (and vacuumed the filter - brilliant BTW, also hadn't even thought of that!), reinstalled it the *right* way and the next time I dry a load I'm hoping it'll not fall off again. Thanks so much for this!!
@@VacTech1 I recently got a really great Shark after having (what I didn't realize was till I got the Shark lol) a crappy off-brand cordless and it could never vacuum the filter as well as my Shark just did. I got a pack of 20 or 25 replacement filters when I first got the dryer and I'm probably not even halfway through it (I usually just clean off the filter till it gets too worn then replace it every couple months) but I'll definitely be vacuuming it from now on. I imagine they'll last much longer this way. Thanks again!!
@@VacTech1 just wanted to thank you again - today was laundry day. I think I did 3 loads and the lint filter thingie didn't pop off once!! Still can't believe I had it installed wrong for 5 years!! 😂
I wondered if you have tried the wool drier balls in the machine to cut drying time or a towel for the first few minutes to soak up extra moisture then remove the towel as I have heard.
I put a comment almost a year ago about how much I appreciated you doing this video. The dryer works like a charm and I am so happy with it and I have you to thank. You were the reason I bought this dryer and I am so thrilled. I just wanted to thank you again. Thank you so much.
Strange, the door on mine didn't discolor and I've been using it for the last 2 years or so. It's good to do this anyways later on when you have used the 2nd lint trap. I'll be doing that today so thanks for the thorough information you've given.
I just cleaned mine out yesterday took a few hours but it's no longer shaking and dries the clothes faster. Yes, there are some screws missing but I have replacement screws which fit perfectly.
Did you make sure the outlet is good? Its really just the cord and the dial (switch). If it doesn't run, you can always call a local appliance repair shop and have them look at it. It might be something simple!
I Have a question!! Mine is almost exactly the same but on the back of mine there's one of those quick release plastic things that the hose connect to. The problem is that my son may have lost that whole hose and plastic part that connect to the back with that quick release. My question is how to find replacement parts for that? I've been looking everywhere but I don't know the technical terms for what I need 😖
Wow, thanks for this update! I'm so glad I watched both of your reviews, so much valuable information, especially regarding the filters. Also, I suspect a lot of the comments like "The dryer just stopped working" are because of the lint accumulated at the back or improper venting/filtering. You should add something to the old video to point viewers to this one for the update.
Thank you for the great video i have a question i have a panda dryer and im having a issue i plugged the cord to a extension cord and it was fine until recently its been acting up the dryer wont start i don't what the problem could be .😫
Mine is a Panda dryer, but must be a bit newer because it has like a touchscreen. It just shut off mid-cycle, and if I unplug it for awhile and plug it back in, it makes a little noise and the screen lights up as usual, but then shuts off right after and won't let me turn it back on. I thought maybe it was overheating so I left it unplugged to cool down for a couple of hours and still won't let me turn it on after the initial noise when plugging it back in. Any idea what might be wrong?
I would contact Panda customer service. My model is mechanically very simple in comparison to the one you have (which I'm not familiar with). Good luck and I hope you're able to get it running!
My issue with mine is where the small filter on the outside gets reall hot. What does that mean? Could it be the heating element? It eventually turn’s completely off. Please help
Thank you so much for the video! I recently bought a different brand of compact dryer, and it is very similar in many ways. However, I decided to try the indoor vent kit because I don’t have a good place to vent it to a window yet. So, I decided to see how it goes with the vent kit for occasional use. I don’t let it sit right next to a wall or something. If I have the AC on, I’m sure it will suck some of the moisture away. However, even the instructions say to vent it outdoors as much as possible. I found out a trick to speed up the drying time of your clothes. After I wash a small load of clothes in the portable washer, which has a 800 RPM spin cycle, I give it an extra spin in a panda 3200 RPM spin dryer. Then, I put it in the compact dryer, and it cuts the drying time in half! I highly suggest you get one of the pandas 3200 RPM spin dryer. I’m going to do a video with it myself. It is the best thing to increase efficiency and lower drying time. In fact, before I got the portable washer and compact dryer, I was washing my clothes by hand and when I use the Panda spin dryer, I would hang my clothes up with a fan in the bathroom and they were dry in one hour. It’s amazing. I highly recommend it. It’s worth it. I hope it last many years, though. Thank you again for the video, because this magic chef compact dryer I have uses the exact style filter in the back of the drum and if I have a problem I’ll know what I can try to do to help it. It’s really important to clean it after every single load. Cheers!
I will have to keep the spin dryer in mind, those look handy. Does it handle larger items like bath towels and/or blankets well? Thanks for the comment!
Deanna Walsh , you’re supposed to vent any dryer outside not because of extra moisture, but because of tiny lint particles that escape through the vent and settle in the room. there’re a huge fire hazard, not to mention your health, since you’re breathing them in
@@VacTech1 Yes it will spin larger items like towels and jeans. However, it’s best to put heaviest items on the bottom, lighter in the middle and a solid item ( like a towel) on the top, while filling the chamber al least 2/3 full. I had spinned-drained bath towels and a pretty heavy bath rug. I kind of put them in like a little bit at a time and curl it around so it will spin that way. But it’s really important to put in enough items to balance it. Don’t overfill it but make sure it is balanced. The instructions say to layer clothes in a folding manner. It also instructs to make sure it is full, if you can. I usually put a shirt or something on the bottom then the socks and other items and then larger items on top of that. Kind of a sandwich and I press around just to make sure everything seems evenly distributed by weight.
@@cuteshytokki Yes I love mine! It’s probably the best thing I ever bought in my life. And I ordered mine through Amazon but they also sell them at Home Depot by ordering online.
Wow, so I guess this is what my problem is? I bought my Magic Chef portable dryer second hand, and it didn't have those disposable felt lint catchers. I didn't even realize they were missing until I watched enough videos! About 2 weeks ago my dryer just stopped dead with no warning, so I've been going down a rabbithole to figure it out. I now have the whole back off and I'm about to remove every shred of lint I see. I already see the rounded felt part is caked in lint, with more lint as I spin the wheel 😖 Edit: so I think I cleaned out all the lint I could access around the felt and in the plastic wheel, but when plugged in, it still does not turn on at all. I don't want to give up yet, but I'm not sure what else to do.
@@71suns hey I was convinced I had to replace the thermal fuse. I replaced the belt and it's been solid a year later. I will say I contacted panda and they showed me via pics where the fuse was and sold me one even though one wasn't available on their website. They were a lot of help. Good luck!
@@fishface6247 Thank you so much for responding to my post. What is the contact information for Panda? I've tried several times with no luck. I have a Panda 2.6cu ft touch-pad dryer. I've spent uncountable hours researching scouring online trying to find solutions to the issue I'm experiencing. The touchpad is responding (or not) erratically... mostly not responding to touch. I AM SO FRUSTRATED. It sounds as though you actually were able to get in touch with Panda and were able to successfully fix your dryer. How did you reach them? Many thanks.
I just gently lifted the gasket, and vacuumed it and under the gasket off with a vacuum and a crevice tool. I would vacuum out the impeller blades too, if the gasket is built up with lint. Just be very careful, as the parts around it are sharp!
Thank you! I only wish you had to change the belt. I think that’s what is wrong with mine. I ordered a new belt and it will be istalling it in a few days when it comes in. I am so glad you talked about the cloth filter because I stopped using mine shortly after getting the dryer because it’s a pain. I guess I will order more of those too LOL
You are the BEST! This video is well explained, clear, the video quality is great and you went step by step so a beginner could learn how to do this (ME). Thanks!!
I know this was a while ago but what if the dryer is building condensation? Both of mine keep over heating and turns off mid cycle and it also leaks water but the clothes I spin at least 4 times to make sure they aren’t soaked when I put them to dry. I’m at a lost because I’m not sure if I should just buy a new one now.
@@bluexoxo1020 probably a blockage in the exhaust vent, back of the dryer, or the filters are clogged and need replaced. Sounds like they need cleaned out or it’ll get worse. I hope you can save it!
Thank you for this *amazing* and detailed video! I came across it because I have this exact dryer, which is a beloved member of our household, and it suddenly made some terrible groaning/clacking noises today, then got very quiet, rotated a few more times then just stopped. I am scared, as we use this appliance almost every day! We opened up the back and saw that indeed the belt has broken so I Amazon Prime ordered a new belt for delivery tomorrow...we will do a thorough cleaning as well when we change it but TBH we have meticulously cleaned the filters the entire 4 years of owning this machine and even the exhaust vent didn't have too much lint. I'm hoping for the best but there aren't really any good videos on how to actually change the belt so I hope it's fairly intuitive. Thanks for this preview of what's inside!
Glad I could help! I'm surprised at how well this dryer is holding up for me. 5.5 years, and it's still working great (and I bought mine as a damaged return). I'm hoping by keeping up with filter maintenance, I will never have to take it apart to clean it out again. Thanks for watching!
great review. The opening of the back and cleaning is bonus. I have a similar model dryer since 2014 and only recently has it stopped heating up. Probably still has life left once i figure out why. These little dryers are impressive.
Absolutely outstanding video. I appreciate the great detail you went into and because of your video I decided to go ahead and order this dryer - can’t wait to get it. Thanks again.
Hi! I need some help so I hope you see this. My Panda dryer stopped working, I had turned it off & lightly closed it for my husband to put close in once they finished. Then it would stay on for about 5 mins, not heat up and shut off. The heating element in the front gets VERY hot dunning this time. When I opened up the back of the dryer we saw that the "Blue" belt that goes to the bottom right wheel was snapped and just laying there. Would that cause these issues or is that different issue?
So I have had the dryer for a week now and I wanted to thank you once again for your fantastic video. Your video was the reason I ordered this dryer and it is life changing for me. It is a powerhouse and I am over the moon so thank you for going above and beyond.
thanks for the great video and information! I noticed the plastic tube that connects to your exhaust is nice and thin.. different from the Panda 3.5 which sticks out about 4 1/2" from the back of the dryer.. i wonder if they are interchangable? It would be nice to have it sit closer to the wall for sure.
@@juanacardoza6014 uh oh! Did you check for lint buildup on the back of the dryer? Be careful using it, could become a fire hazard if you smell burning.
Hi, what is the belt number to order one for my dryer? This belt is black, bigger than the blue we see in the video, has 4 grooves and it is located on the internal area in the dryer.
now this is a review
Thank you! I really appreciate that.
Exactly
very well done AND informative THANK YOU!
This was so informative and easy to follow. Thank you for posting.
Thank you for sharing
Great video. Thanks!
Thanks, Pamela! I appreciate it!
do you know where I can buy the yellow foam that holds the dryer belt. Mines has worn out
What temperature does the drum reach when set on high for an extended run? Can you measure it with an infrared thermometer? Maybe just open the door before it's done when it's warmest and point the thermometer at the clothes to get a reading. You could also measure the exhaust vent temp just out of curiousity. It might be good to know what's normal so you know when it isn't.
Man, i wish more people were like you, straight to the point. Very informative. Thank you!
Thanks momo! I really appreciate it!
Hi. Excellent video. Finally someone made a video of how to exactly maintain a dryer and clean the filters. I wish alot of people who has a portable dryer sees this important video so they'll learn on how to maintain and clean the dryer inside and outside. Have you done a video on how to maintain a portable washer??? If you haven't it would be a wonderful idea to do it. Thanks alot
Thank you so much for watching, and for the nice comment!
@ChicGreekGeek I changed my recommended link to another set of filters on Amazon that seem to be better quality. That's a shame there's poor quality replacement filters out there.
Thanks so much for the excellent tutorial. Your guidance will extend the life of my dryer. Take care.
Thank you so much for explaining everything. I just got one of these and yr video sure has helped me.
Thanks for watching!
Do you know why a dryer like this would heat up and stop and restart randomly but it is not getting my clothes dry. Any suggestions or tips? Also could it be the thermal fuse and where is that located?
Love mine, using it as I speak.
omg...thank you, thank you, THANK YOU for this video! I've only had this dryer since last summer and today it suddenly died. I had thrown out the disposable filter as you did and that was the problem. I couldn't afford to replace the dryer so I'm thrilled that this was such a quick, easy and inexpensive fix. Thanks again!
So glad I could help! Glad yours is working again!
Oh no. Turns out this was NOT the problem after all. I've discovered that there is no air coming out of the back vent at all. Any ideas?? And yes, I took the back panel off and gave it a good cleaning...it WAS full of lint. Thanks
@@tammylynn3183 did you clean the entire back out? Clean the entire fan and around the felt filter. Something is clogged. I hope this helps!
I love mine. I have a different model but pretty much the same. I usually put everything on 1 1/2 hours. I now use dryer sheets instead of fabric softener. It cut down drying time by 30 minutes. The liquid softener coats your clothes for those who dont know. My bath towels-4 at a time, are pretty thick and dry fine in 1 1/2 hours.
I just got one of these. Since the instructions weren't very clear, I referred to your video. Thanks!
Glad I could help! I hope you enjoy it!
@@VacTech1 2 hours wow mine takes about 40 mins for a load of towels spun at 1400 rpm in the washing machine our appliances in the uk plug in to 240 volt plug sockets
@@theoddjobcentre6686 so my old washer doesn't spin nearly as fast, but 2 hours was prolly too long. I think it could have done it in about 80-90 mins. It takes longer, but still does the job well.
Super informative. My dryer cuts out after a few minutes, and after watching this video I realized I got rid of those filters a long time ago. This is exactly the information I was looking for, so now I know why it's cutting out. Thank you!
Thank you, my 4 year old panda dryer has been having issues lately. When i turn it on it stays on for 2 - 3 minutes then it turns off. I click on the on button or any of the other buttons but nothing happens. After leaving it that way in 15- 20 minutes later it would turn on and go through the same thing over again. I replaced the filters and the main one was covered in lint. It has been 3 - 4 months since I replaced it and I use the dryer about 4 - 6 times per month. I then took the back cover off and there was lint covering the motherboard and floor. I cleaned it but I also saw that the belt was broken. I got two from ebay hopefully next week i will get them and replace it. I hope this will fix the dryer I don't want to spent another 250- 300 dollars. has this ever happened to anyone ?
Great vid! Thanks, have the exact model over 5 years, too! Saved a ton of money, time and gas.
It's been a trooper! Glad you're happy with yours too, and if you have to, I hope my tips to care of it will help.
@@VacTech1 Yes, I will always use the supplemental filter to prevent blockage, thanks!
Thank you for your review. I've watched many and yours is by far the most detailed and showing how to take the back off and clean the interior was fantastic!
Thanks! I really appreciate that. I hope it was helpful, and if you get one or something similar, I hope you like it!
These dryers are amazing, mine is about 9 years old. Over time (maybe 4 or 6 years) the blower fan will become hard to turn. It will require grease on the brass bushing. The blower fan was not turning easily and had a little wear on the steel shaft/brass bushing bearing surface. It is not hard to disassemble and lube. Use a high quality grease, automotive type should work fine. Don't use oil or WD-40 because it won't last.
Great to know, thank you for this tip!
My plastic filter keeps falling off during drying. I compared my filter to yours and it looks similar but don’t understand why it doesn’t stay put. Any suggestions? I was looking for a new one but couldn’t find one for this dryer! Help!
I did everything you said and did on your video my dryer doesn't want to dry my clothes? What else can I do?
Hi I have the same dryer but my filter has been falling off I noticed that yours clicks in and mine doesn’t do I need to replace something?
Any idea where I can buy the plastic part of the filter. Bought mine used & didn't come with one 😬
Same here. Did you figure it out?
Glad to know that last long!
What is so ironic is I was just thinking about using it without those filter pads! Thanks for sharing this as I learned by your mistake!!!!
Thank you for going the extra mile 🙌🏼 and teaching us how to trouble shoot & clean up the lint problem that can accumulate over time inside the metal back of the dryer with/without that important back filter. Other TH-cam review videos never even showed that 2nd filter or used it. I’m on the fence upgrading getting a compact dryer 2.6 or 3.5 but either way this video gives me much more peace of mind to tackle the lint problem if/when it occurs👏🏼 LOVE this video 🤩 5 stars!!!
Thank you so much! If you go for one of these smaller dryers, I think you'll like it!
Really helpful video!! Would love to see a demo on this same model for replacing the thermal fuse, I think the one on mine just burned out. It looks like I have to remove the drum to access and replace it. I bet you'd do an excellent job showing less handy folks like myself how to do that!
If mine ever goes out, I'll do just that! Glad you liked the video!
Thank you for this video! I used it for disassembly instructions for my Magic Chef 2.6 cu ft. dryer, which apparently uses all the same major parts and panels. I suspected that my blower belt had broken, and sure enough, it has! Thanks to you, I knew to look for and remove lint accumulations, which I will add to my annual maintenance schedule. Indeed, the two filters are important! But they're not catch-alls.
Also thanks to your video, I confirmed that the felt collar at the back of the drum should be out all around: several inches of my unit's was tucked in (sucked in?) toward the drum in diametrically opposing areas, making it seem plausible that that's by design. It isn't! So if you have any advice about how to avoid that happening again, then I'd appreciate knowing it!
Hi im thinking of getting this dryer. There are 2 dryers in my apt. complex. It cost 2 dollars for 45 minutes. Work great but since theres only 2 i have to wait for ever to use them. Does this cost alot to run since tou drying for over an hour. What is electric bill like when you running this?. Thanks
It's incredibly cheap to run. I haven't noticed a major change in my electric bill using it. It'll save you money over time, and it's worth the convenience.
Thank you sir well made review.
I can’t pull the small one out for the life me. Also my dryer dosent just go in one direction. It goes in clock wise and counter clockwise every other minute.
Oh that's neat that it changes direction! If you're trying to remove the small intake filter, try prying from the top with a small flathead screwdriver. I hope this helps!
@@VacTech1 I guess it is cool but it’s very loud when it stops and then switches directions. It also seems to not dry as fast. I feel when I first got it I set it in one direction. I dunno.
Great video, thank you for being so thorough! I actually bought the 2.6 cubic feet touch screen dryer about 2 weeks ago and its giving me an error message of "E3" I figure the panda dryers might be the same as far as the error codes but I can not for tge life of me, find one bit of info on this code?! I contacted customer service and haven't heard back yet. I'm hoping it's an easy fix bc everybody seems to be sold out now😬 if anybody knows about this please help a sister out!✌
Who did you contact for customer service?
@kphelps1605 I ended up contacting Panda and they told me to contact Home Depot for a return. Panda sent me a return slip to have me ship it back to them. Then when I got refund back from Home Depot, (they packaged it for me) then I had to take it to a fed-ex and send it off. Bought another style dryer I think from Walmart. The Magic Chef brand. It was a proccess but I @ the time needed a working dryer!
I have the black and decker compact dryer. It was working perfectly fine. All of sudden one day it decided to not turn on whatsoever. What do you think it could possibly be?
My Panda dryer only two years old..same thing. I'm more than frustrated and frankly furious. Very few appliance repair people will work on portable dryers and appliances...plus paying over $300+ for this dryer and it barely hit the two years mark let alone the 5-10 year lifespan the company contends. I'm a senior.. live alone..do laundry twice a month. Cleaned both filters faithfully every single load. Didn't overload the dryer...well aware of its limited capacity. I've spent all day searching for solutions to fix it myself if I can.. if not, I'll have to let it go. Will I buy this brand again? NO.
Wow thanks! I took out my extra filter too and now it's dirty inside. Oh, I took my dryer apart because it's making a slight bearing sound. My boat mechanic BFF said to just use it until it dies? 😆
My issue is the foam padding wore out. The belt is slapping against the metal now. Also, the part when the belt rotates near the bottom foot is creaking
Thank you for this - I watched the older one and remembered your lint problem, I'm happy I found this. I have a Magic Chef which is basically idential. But it stopped heating - if you have any ideas on why and read this and can share, it would be very helpful. I purchased the heating element from the manufacturer but I'm not sure that's the answer and haven't had the courage to open up the back yet.
Great important video! Thanks. You always do a great thorough job!
Thank you so much! I really appreciate that.
Glad I came across this!! I have a similar dryer (different brand but almost exact same thing). I've had it for about 5 years and love it, but more and more often recently, the damn lint filter kept falling off during a cycle. Every 5 minutes or so until I got it secured in a sweet spot and it stayed on. It's been super annoying. However!! Your video brought to light the fact that I've had the filter installed wrong this entire time!! I swear when I got the dryer, the fabric (disposable / replaceable) filter was *inside* the two plastic pieces. The one I yours is exactly the same as the one in mine. Mine doesn't snap together the way yours does, but I'm wondering if it's supposed to. I just got out the manual for the dryer and sure enough, it seems to depict the order of installation the way you showed and not the way I've had it. The diagram is kinda unclear but looking at it the way you have it vs. how I had it your way makes more sense. I just popped it out (and vacuumed the filter - brilliant BTW, also hadn't even thought of that!), reinstalled it the *right* way and the next time I dry a load I'm hoping it'll not fall off again. Thanks so much for this!!
That’s great! Glad I could help, and I’m glad you liked the tip about vacuuming the filter. It’s the easiest way.
@@VacTech1 I recently got a really great Shark after having (what I didn't realize was till I got the Shark lol) a crappy off-brand cordless and it could never vacuum the filter as well as my Shark just did. I got a pack of 20 or 25 replacement filters when I first got the dryer and I'm probably not even halfway through it (I usually just clean off the filter till it gets too worn then replace it every couple months) but I'll definitely be vacuuming it from now on. I imagine they'll last much longer this way. Thanks again!!
@@VacTech1 just wanted to thank you again - today was laundry day. I think I did 3 loads and the lint filter thingie didn't pop off once!! Still can't believe I had it installed wrong for 5 years!! 😂
@@rckblykitn I’m glad it’s working! Mine has been great all these years, haven’t had to clean it out since making this video.
Has it ever made a rattling noise for you ? I’ve had mine for 3 months and it just started rattling recently.
Outside of the clothes or lint trap, no. Does it rattle if you run it when empty? If it's bad or getting worse, I would contact Panda.
@@VacTech1 I am using it right now and it just stopped rattling but out of nowhere it continues and stops
@@nakaiarambula7354 does it have clothes in it? Buttons and zippers will rattle as they tumble around.
@@VacTech1 they were actually thin comforters as of right now I’m drying shirts and it rattle very lightly 🧐
I wondered if you have tried the wool drier balls in the machine to cut drying time or a towel for the first few minutes to soak up extra moisture then remove the towel as I have heard.
After moving my dryer from place to place, the dryer now refuses to turn on. Any recommended troubleshooting steps that I can find?
I put a comment almost a year ago about how much I appreciated you doing this video. The dryer works like a charm and I am so happy with it and I have you to thank. You were the reason I bought this dryer and I am so thrilled. I just wanted to thank you again. Thank you so much.
Wow, I really appreciate that! Glad you're happy with the dryer. Filter management aside, it's a great product.
Strange, the door on mine didn't discolor and I've been using it for the last 2 years or so. It's good to do this anyways later on when you have used the 2nd lint trap. I'll be doing that today so thanks for the thorough information you've given.
I just cleaned mine out yesterday took a few hours but it's no longer shaking and dries the clothes faster. Yes, there are some screws missing but I have replacement screws which fit perfectly.
potato
This is a really well made and explained video ! Ty
Thank you so much! I'm glad you liked it. Thanks for the nice comment!
@@VacTech1 awe your very welcome . Please keep up the good work . Its appreciated , some one has to protect the consumer !
Did it make your dryer run super slow? I have a magic chef and it’s been 2 hours with two towels in they aren’t dry yet..
Thanks for the great Video. What if u don't have a window?
I would buy a model that doesnt require outdoor ventilation (which are called condenser dryers).
Hi, I have the same dryer, the barrel making squeaking noise when running, will replace the drumb belt fix the noise?
My dryer wont start, i changed the power cord and it still wont come on hellllp
Did you make sure the outlet is good? Its really just the cord and the dial (switch). If it doesn't run, you can always call a local appliance repair shop and have them look at it. It might be something simple!
I Have a question!!
Mine is almost exactly the same but on the back of mine there's one of those quick release plastic things that the hose connect to.
The problem is that my son may have lost that whole hose and plastic part that connect to the back with that quick release.
My question is how to find replacement parts for that? I've been looking everywhere but I don't know the technical terms for what I need 😖
Wow, thanks for this update! I'm so glad I watched both of your reviews, so much valuable information, especially regarding the filters. Also, I suspect a lot of the comments like "The dryer just stopped working" are because of the lint accumulated at the back or improper venting/filtering. You should add something to the old video to point viewers to this one for the update.
I'd probably take some wire cutters or a dremel and cut that little grid out of the exhaust duct.
Would you know how to replace the thermal fuse i can't seem to find it in mine
Sorry, I've never had to do that. Maybe it's near the control knob, or with a wiring harness?
Thank you for the great video i have a question i have a panda dryer and im having a issue i plugged the cord to a extension cord and it was fine until recently its been acting up the dryer wont start i don't what the problem could be .😫
Mine is a Panda dryer, but must be a bit newer because it has like a touchscreen. It just shut off mid-cycle, and if I unplug it for awhile and plug it back in, it makes a little noise and the screen lights up as usual, but then shuts off right after and won't let me turn it back on. I thought maybe it was overheating so I left it unplugged to cool down for a couple of hours and still won't let me turn it on after the initial noise when plugging it back in. Any idea what might be wrong?
I would contact Panda customer service. My model is mechanically very simple in comparison to the one you have (which I'm not familiar with). Good luck and I hope you're able to get it running!
@@VacTech1 unfortunately I bought it used but I hope they'll still help me! Thanks!
@@aprilmilnes3583 I would start with them, then check with local appliance repair shops.
My issue with mine is where the small filter on the outside gets reall hot. What does that mean? Could it be the heating element? It eventually turn’s completely off. Please help
My issue right now is that the exhaust shroud keeps falling off not sure how i can fix this.
Great review...thanks for sharing!
Thank you!👍
Glad I could help!
Nice follow up, it's good to get a long term view on a product warts and all.
Outside of dealing with this dryer, I wonder if a person would have much of a life, it seams to take up a lot of time
Lol it's worth the extra effort. If you use and clean the filters regularly, you shouldn't have to disassemble it, like I did in the video.
Thank you so much for the video! I recently bought a different brand of compact dryer, and it is very similar in many ways. However, I decided to try the indoor vent kit because I don’t have a good place to vent it to a window yet. So, I decided to see how it goes with the vent kit for occasional use. I don’t let it sit right next to a wall or something. If I have the AC on, I’m sure it will suck some of the moisture away. However, even the instructions say to vent it outdoors as much as possible. I found out a trick to speed up the drying time of your clothes. After I wash a small load of clothes in the portable washer, which has a 800 RPM spin cycle, I give it an extra spin in a panda 3200 RPM spin dryer. Then, I put it in the compact dryer, and it cuts the drying time in half! I highly suggest you get one of the pandas 3200 RPM spin dryer. I’m going to do a video with it myself. It is the best thing to increase efficiency and lower drying time. In fact, before I got the portable washer and compact dryer, I was washing my clothes by hand and when I use the Panda spin dryer, I would hang my clothes up with a fan in the bathroom and they were dry in one hour. It’s amazing. I highly recommend it. It’s worth it. I hope it last many years, though. Thank you again for the video, because this magic chef compact dryer I have uses the exact style filter in the back of the drum and if I have a problem I’ll know what I can try to do to help it. It’s really important to clean it after every single load. Cheers!
I will have to keep the spin dryer in mind, those look handy. Does it handle larger items like bath towels and/or blankets well? Thanks for the comment!
@@cuteshytokki Thanks for your thoughts on it, and the info!
Deanna Walsh , you’re supposed to vent any dryer outside not because of extra moisture, but because of tiny lint particles that escape through the vent and settle in the room. there’re a huge fire hazard, not to mention your health, since you’re breathing them in
@@VacTech1 Yes it will spin larger items like towels and jeans. However, it’s best to put heaviest items on the bottom, lighter in the middle and a solid item ( like a towel) on the top, while filling the chamber al least 2/3 full. I had spinned-drained bath towels and a pretty heavy bath rug. I kind of put them in like a little bit at a time and curl it around so it will spin that way. But it’s really important to put in enough items to balance it. Don’t overfill it but make sure it is balanced. The instructions say to layer clothes in a folding manner. It also instructs to make sure it is full, if you can. I usually put a shirt or something on the bottom then the socks and other items and then larger items on top of that. Kind of a sandwich and I press around just to make sure everything seems evenly distributed by weight.
@@cuteshytokki Yes I love mine! It’s probably the best thing I ever bought in my life. And I ordered mine through Amazon but they also sell them at Home Depot by ordering online.
burned sponge is not a concern for fire hazard....?
Detailed and very helpful thank you so much!
Wow, so I guess this is what my problem is? I bought my Magic Chef portable dryer second hand, and it didn't have those disposable felt lint catchers. I didn't even realize they were missing until I watched enough videos! About 2 weeks ago my dryer just stopped dead with no warning, so I've been going down a rabbithole to figure it out. I now have the whole back off and I'm about to remove every shred of lint I see. I already see the rounded felt part is caked in lint, with more lint as I spin the wheel 😖
Edit: so I think I cleaned out all the lint I could access around the felt and in the plastic wheel, but when plugged in, it still does not turn on at all. I don't want to give up yet, but I'm not sure what else to do.
Does it just not run at all? Could be a fuse that needs replacing.
where can I buy parts for this? I need the pulley where the belt turns
Have you had to replace the thermal fuse? Can you point it out to me in the unit? I'm having a hard time locating nthe thermal fuse
Same.
@@71suns hey I was convinced I had to replace the thermal fuse. I replaced the belt and it's been solid a year later. I will say I contacted panda and they showed me via pics where the fuse was and sold me one even though one wasn't available on their website. They were a lot of help. Good luck!
@@fishface6247 Thank you so much for responding to my post. What is the contact information for Panda? I've tried several times with no luck. I have a Panda 2.6cu ft touch-pad dryer. I've spent uncountable hours researching scouring online trying to find solutions to the issue I'm experiencing. The touchpad is responding (or not) erratically... mostly not responding to touch. I AM SO FRUSTRATED. It sounds as though you actually were able to get in touch with Panda and were able to successfully fix your dryer. How did you reach them? Many thanks.
@@71suns hey no problem. This was a couple years ago I had an email address from them but I can't seem to find it anymore. Sorry
Great job! This video is really thorough.
Thank you! How do you clean out the gasket part?
I just gently lifted the gasket, and vacuumed it and under the gasket off with a vacuum and a crevice tool. I would vacuum out the impeller blades too, if the gasket is built up with lint. Just be very careful, as the parts around it are sharp!
Thank you! I only wish you had to change the belt. I think that’s what is wrong with mine. I ordered a new belt and it will be istalling it in a few days when it comes in. I am so glad you talked about the cloth filter because I stopped using mine shortly after getting the dryer because it’s a pain. I guess I will order more of those too LOL
Thanks for the comment! Almost surprisingly, I've never had to change the belt. I've only had to clear clogs (due to my own mistake haha).
You are the BEST! This video is well explained, clear, the video quality is great and you went step by step so a beginner could learn how to do this (ME). Thanks!!
Thanks a lot!
I can’t find this except dryer for nothing!
I know this was a while ago but what if the dryer is building condensation? Both of mine keep over heating and turns off mid cycle and it also leaks water but the clothes I spin at least 4 times to make sure they aren’t soaked when I put them to dry. I’m at a lost because I’m not sure if I should just buy a new one now.
@@bluexoxo1020 probably a blockage in the exhaust vent, back of the dryer, or the filters are clogged and need replaced. Sounds like they need cleaned out or it’ll get worse. I hope you can save it!
Thank you for this *amazing* and detailed video! I came across it because I have this exact dryer, which is a beloved member of our household, and it suddenly made some terrible groaning/clacking noises today, then got very quiet, rotated a few more times then just stopped. I am scared, as we use this appliance almost every day! We opened up the back and saw that indeed the belt has broken so I Amazon Prime ordered a new belt for delivery tomorrow...we will do a thorough cleaning as well when we change it but TBH we have meticulously cleaned the filters the entire 4 years of owning this machine and even the exhaust vent didn't have too much lint. I'm hoping for the best but there aren't really any good videos on how to actually change the belt so I hope it's fairly intuitive. Thanks for this preview of what's inside!
Glad I could help! I'm surprised at how well this dryer is holding up for me. 5.5 years, and it's still working great (and I bought mine as a damaged return). I'm hoping by keeping up with filter maintenance, I will never have to take it apart to clean it out again. Thanks for watching!
Great review! Very well detailed.
I would take a dremel to that little grill in the exhaust
Thanks for a great video - it is very helpful, especially in regards to the filter!
Thank you, glad you found it helpful!
Thank you. Because of your video and one other, I fixed my dryer today. God bless you.
Glad to hear it! Hopefully it'll be good to go for a while now.
great review. The opening of the back and cleaning is bonus. I have a similar model dryer since 2014 and only recently has it stopped heating up. Probably still has life left once i figure out why. These little dryers are impressive.
Clean yours out, and put it back to use! Thanks for watching, Mike!
You shouldn't lay it face down.
Mines stopped working not heating enough
Absolutely outstanding video. I appreciate the great detail you went into and because of your video I decided to go ahead and order this dryer - can’t wait to get it. Thanks again.
Wow, thanks lot! I appreciate that, and I hope you're happy with the dryer.
Alguien sabe donde puedo conseguir el reloj ?
Hi! I need some help so I hope you see this. My Panda dryer stopped working, I had turned it off & lightly closed it for my husband to put close in once they finished. Then it would stay on for about 5 mins, not heat up and shut off. The heating element in the front gets VERY hot dunning this time. When I opened up the back of the dryer we saw that the "Blue" belt that goes to the bottom right wheel was snapped and just laying there. Would that cause these issues or is that different issue?
That blue belt eventually breaks on all of these dryers
What happens if it gets hot but doesn’t spin
So I have had the dryer for a week now and I wanted to thank you once again for your fantastic video. Your video was the reason I ordered this dryer and it is life changing for me. It is a powerhouse and I am over the moon so thank you for going above and beyond.
Thank you so much for the nice comment! Glad I could help! It really is great to have this at home.
What if the lent filter keep fallingoff
Where is the fuse at on this dryer
Great video!! Thx
My magic chef 1.5cu ft doesn't heat the way it used to any tips?
It might need a good cleaning. Do you have it set to the highest heat setting? Mine has a low/high button.
Thank You for such a detailed tutorial!
Thank you for watching! I hope it was helpful.
It does not seem like my dryer is getting hot
Do you have it set to "high" via the button on the front?
I appreciate u ❤️💯🙏🏾
Thanks! I appreciate you watching the vid!
fantastic video! thank you
Thank you so much!
thanks for the great video and information! I noticed the plastic tube that connects to your exhaust is nice and thin.. different from the Panda 3.5 which sticks out about 4 1/2" from the back of the dryer.. i wonder if they are interchangable? It would be nice to have it sit closer to the wall for sure.
Hello Mine spins an blows hot air but it doesn’t sound the same an it smells like burn while spinning
@@juanacardoza6014 uh oh! Did you check for lint buildup on the back of the dryer? Be careful using it, could become a fire hazard if you smell burning.
Mine too. I checked all over for lint vacuumed it up and i thought it was fine and started it and it smelt burnt and now wont turn on
Thank you!! I’m dryer wasn’t heating up and sure enough it was the backing it was clogged.
👍👍👍👏🏻👏🏻👏🏻❤
Hi, what is the belt number to order one for my dryer? This belt is black, bigger than the blue we see in the video, has 4 grooves and it is located on the internal area in the dryer.