Considering how these disposable grips are sold out everywhere and not even on Bishop's website, I would love to see this same video without the disposable grips.
I use the Bishop packer wand and I just have to say those wireless Rocket power suplies work really badly. Nothing compared to a real power supply. It can not handle the 11 volt setting and the rest of the settings just barely, but when going in to skin it slows the motor down dramatically. Not quite there yet. Are you going to design your own?
Can you try turning on and off the wand with the cartridge on? Cause I got the wand 5.0 liner and the same power battery and could not turn it on.. I had take the cartridge off..
There are no good battery packs on the market yet unfortunately. They’re cheap and don’t have enough starting power to push past a certain voltage. We’ll be releasing a battery pack with a 9v jump start so it will avoid this problem. In the meantime, turn the machine on with the power supply on and then plug the cartridge in. This is the only way to make it work for now for Liners. Shaders and even Packers shouldn’t see this problem as much because the smaller strokes have less membrane tension
In your machine there is this gap is that because of the needle to push it more in and out? If so i wish there was some little numbers in that gap that would tell you how far the needle is hanging out 💪🏻 because there is no click when turning the grip 🤷♂️
What happen when you change the cartridge? You grab the cartridge with your globos, leave a cartridge on a desk. Put another and chain again for de last that you leave in the desk? Its full of Cross contaminación
What they don't tell you is, you need to start the battery and THEN put the cartridge in. So be careful not to stab yourself with it :/ If you insert the cartridge first and then start the battery, it gets jammed and doesn't push the plunger. Was disappointed to learn that after purchasing my wand and battery.
In your machine there is this gap is that because of the needle to push it more in and out? If so i wish there was some little numbers in that gap that would tell you how far the needle is hanging out 💪🏻 because there is no click when turning the grip 🤷♂️
Can you do a video on post tattoo sanitation that won’t void warranty
Considering how these disposable grips are sold out everywhere and not even on Bishop's website, I would love to see this same video without the disposable grips.
Wrap your regular tip in barrier film. Then griptape and poke a hole for cartridge.
Perfect thanks.....I just go my shader wand in the post the other day. ❤
Awesome thank you so much bishop fam for life
Do painfulpleasures precision cartridges fit in the Bishop wand packer?
Awesome work brother I can't say enough about my v6 capo thank you for giving me an opportunity to buy an amazing rotary
I like bishop😍😍😍😘😘😘
When’s your battery pack being put out?
Wat machine do u recommend for a beginner
I own the liner and shader. I've always wondered. Doesnt the push bar have to be replaced every now and then?
Is this battery works with brushless motor ?
I use the Bishop packer wand and I just have to say those wireless Rocket power suplies work really badly. Nothing compared to a real power supply. It can not handle the 11 volt setting and the rest of the settings just barely, but when going in to skin it slows the motor down dramatically. Not quite there yet. Are you going to design your own?
i just purchased a Bishop Wand. Does it not come with grips already?
How far out is the battery pack
Can you try turning on and off the wand with the cartridge on? Cause I got the wand 5.0 liner and the same power battery and could not turn it on.. I had take the cartridge off..
There are no good battery packs on the market yet unfortunately. They’re cheap and don’t have enough starting power to push past a certain voltage. We’ll be releasing a battery pack with a 9v jump start so it will avoid this problem. In the meantime, turn the machine on with the power supply on and then plug the cartridge in. This is the only way to make it work for now for Liners. Shaders and even Packers shouldn’t see this problem as much because the smaller strokes have less membrane tension
@@BishopTattooSupply i have the same issue with the Packer
Which Battery Pack is that?
Rocket
In your machine there is this gap is that because of the needle to push it more in and out? If so i wish there was some little numbers in that gap that would tell you how far the needle is hanging out 💪🏻 because there is no click when turning the grip 🤷♂️
Like it!!!
i bought the power wand with two batteries ,bigger battery took a shit after a day still haven't heard from them
How much voltage good for lining work for wand ?
It says in the booklet for a liner 6-8v
What happen when you change the cartridge? You grab the cartridge with your globos, leave a cartridge on a desk. Put another and chain again for de last that you leave in the desk? Its full of Cross contaminación
Do you guys ever answer the messages on Instagram?
What they don't tell you is, you need to start the battery and THEN put the cartridge in. So be careful not to stab yourself with it :/
If you insert the cartridge first and then start the battery, it gets jammed and doesn't push the plunger.
Was disappointed to learn that after purchasing my wand and battery.
Really!?////
Might be a good machine but the bishop team suck as they never reply to anything🙄 they just want your money
In your machine there is this gap is that because of the needle to push it more in and out? If so i wish there was some little numbers in that gap that would tell you how far the needle is hanging out 💪🏻 because there is no click when turning the grip 🤷♂️