Thank you! I was worried about finding wheels/rims for these but knowing the mini-z's will work is good news! Think I'll order one now. Loving the 1/24 scale r/c
The small one is from Orlandoo www.asiatees.com/display?Orlandoo-Hunter-Model-Orlandoo-Hunter-Jeep-Rubicon-Parts-Hop-Ups-Upgrades&brand=Orlandoo%20Hunter%20Model&model=Orlandoo%20Hunter%20Jeep%20Rubicon&id=134599&pid=1 I got it with the car. The shipping cost for buying it alone is not worth it. You can also use this generic cross wrench. bit.ly/2EmCA2R
Yes, you'll need to replace the knuckles with something from XRX DPA or probably GLD. People have tried the XRX knuckles already so I'l going to try GLD next.
@@BeaversHobby Did you figure out if it will work with the gld knuckles? I was thinking to use awd wheels at the front too but can't find the xrx dpa one.
@@N0ecq Yes, it'll work. But you will need some mix & match parts. Use the ball heads on the control arms on the GLD knuckles. Then use GLD steering ball head on the GLD knuckle and then use GLD ball cup on the steering linkage. The steering rod is a bit too long so you might need to screw that in very deep.
@@BeaversHobby I saw some similar solution using dkmk knuckles. Wonder if there is alternative way only replace the knuckles since I have done some upgrade on the steering
![[Review & Tutorial] Drift Art Super Mini Gyro V5 for Drift RC](http://i.ytimg.com/vi/8QowVTeYdMo/mqdefault.jpg)
![[Review & Tutorial] Drift Art Super Mini Gyro V5 for Drift RC](/img/tr.png)
![[Quick Review] WLtoys 284010 - All improvements from previous versions](http://i.ytimg.com/vi/9AkwHF-D-zI/mqdefault.jpg)
![[Review] Jiabaile 1/43 | The Cheapest 4WD RC Drift Car With Full Proportional](http://i.ytimg.com/vi/Y2bAZ96c7gE/mqdefault.jpg)
Thank you! I was worried about finding wheels/rims for these but knowing the mini-z's will work is good news! Think I'll order one now. Loving the 1/24 scale r/c
Thanks for sharing, thias is some good news. The new Zerorc has same set up.
Always good information
Very good..thank sharing👍🙏
thanks bev now i can have a larger assortment of rims 😍
where can i buy the tool like yours for small rim bolts?
The small one is from Orlandoo www.asiatees.com/display?Orlandoo-Hunter-Model-Orlandoo-Hunter-Jeep-Rubicon-Parts-Hop-Ups-Upgrades&brand=Orlandoo%20Hunter%20Model&model=Orlandoo%20Hunter%20Jeep%20Rubicon&id=134599&pid=1 I got it with the car. The shipping cost for buying it alone is not worth it.
You can also use this generic cross wrench. bit.ly/2EmCA2R
Can you adjust camber on brmx?
Yes, front and rear camber can be adjusted. Front toe and caster can also be adjusted as well.
Is it possible to use AWD wheels at the front?
Yes, you'll need to replace the knuckles with something from XRX DPA or probably GLD.
People have tried the XRX knuckles already so I'l going to try GLD next.
@@BeaversHobby Did you figure out if it will work with the gld knuckles? I was thinking to use awd wheels at the front too but can't find the xrx dpa one.
@@N0ecq Yes, it'll work. But you will need some mix & match parts. Use the ball heads on the control arms on the GLD knuckles. Then use GLD steering ball head on the GLD knuckle and then use GLD ball cup on the steering linkage. The steering rod is a bit too long so you might need to screw that in very deep.
@@BeaversHobby I saw some similar solution using dkmk knuckles. Wonder if there is alternative way only replace the knuckles since I have done some upgrade on the steering
Is the xrx one the only solution for that?
Sounds loud 🔊, mine is louder when putting the body on.
MINI-Z AWD with SUPER LONGWHEEL EDISION