Word of caution... I installed these about a year ago, things were great until this last Friday night as I was pulling up to my garage, my handlebars came off and I had to lay the bike down. Upon investigation, one bolt was missing and the other stripped out of the riser. It appears the bolts are not long enough and didn't seat further into the riser. No warning, no looseness, just bam! I really like these risers, so I will re-order from Bad Ace Billet online. But I will install longer bolts this time along with some locktight. It could have been far worse if I was on the road or a freeway.
@@mml1224 Hi JM Yes, they will fit a 900 Classic without any cable adjustment. However, make sure the bolts fastening the risers are long enough as well as "Locktite" as a safety precaution. I mentioned this to the manufacturer when I ordered a new set, but it fell on deaf ears and they sent the same bolts. I decided it wasn't worth reinstalling and went back to the stock set up.
@@BrokenandRestored thanks man, how much longer do i need the bolts 1 to 2 cm, make that much difference? i have a bolt plac enear me so i am sure i can find it. how much were they? i am new to risers, wats the main reason for them, hand position or looks? not sure if i really need em'
@@mml1224 Hi JM. When I looked at the bolts after they stripped out, it looked like they only seated less than a 1/4 inch. They should seat at least 1/2 inch or more. I really liked the risers as they just made my ride very comfortable, but at the risk of safety, I can't recommend them.
hey, these look good. it's been a few years, what's your current thinking about these? Also, did you find your cables were binding a little, because of the extra distance?
iliked the video, sohow much were they, and can they fit a classic same year? also, wats the real reason to use risers? looks or better position for your arm? thanks
@@budlyle1016 no, I went with a different style anyway. I got mine from refined cycle. They raise the bar and offset them back some so they're they're higher and closer.
![[Live] : ONE 169 วันนี้!! "อนาโตลี vs อูมาร์"](http://i.ytimg.com/vi/IK3YZVWuFJg/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 86 | คู่เอก "คมเพชร vs ชาติพยัคฆ์"](http://i.ytimg.com/vi/m3q_dRYDuU8/mqdefault.jpg)
6 years ago and I still wish I could find same ones for my '01 800
Right?!
Word of caution... I installed these about a year ago, things were great until this last Friday night as I was pulling up to my garage, my handlebars came off and I had to lay the bike down. Upon investigation, one bolt was missing and the other stripped out of the riser. It appears the bolts are not long enough and didn't seat further into the riser. No warning, no looseness, just bam! I really like these risers, so I will re-order from Bad Ace Billet online. But I will install longer bolts this time along with some locktight. It could have been far worse if I was on the road or a freeway.
sorlry2 hear that, wat did u pay4them? can they fit a classic v900? i am concerned abot cable stretching 2much, thanks
@@mml1224 Hi JM
Yes, they will fit a 900 Classic without any cable adjustment. However, make sure the bolts fastening the risers are long enough as well as "Locktite" as a safety precaution. I mentioned this to the manufacturer when I ordered a new set, but it fell on deaf ears and they sent the same bolts.
I decided it wasn't worth reinstalling and went back to the stock set up.
@@BrokenandRestored thanks man, how much longer do i need the bolts 1 to 2 cm, make that much difference? i have a bolt plac enear me so i am sure i can find it. how much were they? i am new to risers, wats the main reason for them, hand position or looks? not sure if i really need em'
@@mml1224 Hi JM. When I looked at the bolts after they stripped out, it looked like they only seated less than a 1/4 inch. They should seat at least 1/2 inch or more.
I really liked the risers as they just made my ride very comfortable, but at the risk of safety, I can't recommend them.
Make them yourself, 23mm Stanley long sockets and 50mm M10 long nuts
Hello friend, could you pass the ebay purchase link?
where did you get these risers ? I looked all over and can not find any !
Hey Brother why don't you put up a link where you got the risers
Were did u buy them from ?
Link please? Where can I get these?
Did u every get a link for the risers
@@budlyle1016 No I didn't and I no longer have a Vulcan, sorry I can't help you
I wish I could find these!!
Thanks for the review - Ordered!
Where did you order them?
Where did you get them ?
5 years later and we still don't know where to buy them at lol
hey, these look good. it's been a few years, what's your current thinking about these? Also, did you find your cables were binding a little, because of the extra distance?
iliked the video, sohow much were they, and can they fit a classic same year? also, wats the real reason to use risers? looks or better position for your arm? thanks
Can you tell me where you purchased these?
On second thought I would worry about them falling off. Doesn't seem to be much bolt going in from the bottom.
1.5x diameter is a bolts full strength
THX.I like this video.I will find one for my vn900.
Where can I find it?Thx ..
dude next time protect your gas tank from the start to stop getting marked by your wrench and it is called Blue Loctite
looks good, thanks for video.
Where did you get them too
By the way, great exhaust sound! What exhaust did you installed on the bike?
Yup I do agree they’re low for tall people
Where did you get the risers from?
Did u ever find where he got them from
@@budlyle1016 no, I went with a different style anyway. I got mine from refined cycle. They raise the bar and offset them back some so they're they're higher and closer.
@@F.o.s.t.e.r. do you have a link? And do they fit a vn800 vulcan stock handlebars? 🤔 Thx
@@obsessivegarage921 refinedcycle.com/Handle-Bar-Risers_c8.htm
Hi, please can you point where did you buy them?
Where do I get them???
Where did you get these I just ordered on eBay and completely wrong bolts are so long and the riser don't screw on to original bolt from handlebars
Me too!!..f&@k!!
Где покупали такие проставки
my opinion, the cables are under stress ... it would disturb me the whole time.
Agreed. You should re-route it to get more loose.
Where did you get those?
What height and brand is that sissy bar?
great vid, eze DIY, HOW MUCH$?...CAN SOMEONE PLEZE SEND ME A LINK TO FIND RISERS 2 INCHES FOR VULCAN 900 CLASSIC 2013?
Nice video. Where did you buy risers or it’s still stay in the secret? Lol)))
hi , where did you buy it?
tony aceves I've just found them on eBay . 142015147287. . might be doing this myself
Link: www.badacebillet.com/product-page/handlebar-riser-extensions-kawasaki-vulcan-mean-streak-vn-1500-vn-1600-vn1600
this link doesn't work