Not sure why this came up in my feed, but either those finishing pads are worn out or the machine is not horizontal. That haze is unacceptable unless there is a further finishing stage not presented here. Either way, we never saw the "before" condition either. It needed further development.
I have 30yrs on the tools polishing granite from memorial work to counter tops and more... Any one that tries to improve his or her lot shouldn`t have such hatefull coments made but instead have at least some advise that will hopefully improve their efforts....shame on the lot of you........The the real reason for the cloudy/missed polish to the middle of the surface is because the pad material is soft. I am not talking about the backing pad. As preasure is applied the outer edge of the pad slightly rolls over the sides of the edge being polished and thus lifts the cunter of the pad,the flat pad adopts a dome shape. the more pressure applied the worse the problem. for this specific reason edge poliishing machines use hard blocks..I respectfully suggest to Air Tools Gison that he uses hard blocks,slow the rpm by half and slow the feed by half and he will aheive what may well be a perfect edge polish. Futher..I would never say things that my fists couldn`t cash. Keep up your good works Gison
Your wrong mate I've also got years of experience here's what's wrong people 1.PRESSURE FROM POLISHING PAD TO STONE NEEDS TO BE MINIMUM 1 BAR PRESSURE OR VERY CLOSE TO IT. 2. IT HAS NOTHING TO DO WITH THE CENTRE OF THE POLISHING PAD ITS PROBABLY BETTER SET UP LIKE THAT. 3.LESS WATER FOR CORSE GRIT POLISHING PADS AS YOU SHOULD ADD MORE PRESSURE YOU SHOULD NOT NEED MUCH WATER UNTIL FINAL TWO POLISHING PADS THEN TURN WATER UP A BIT MORE WHY BECAUSE THE WATER TURNED UP TO MUCH CAUSES THE POLISHING PADS TO NOT POLISH PROPERLY HIGH PRESSURE PLUS MOVEMENT AND A PAD THAT'S REALLY FINE CREATES A THIN SURFACE AREA WHERE THE WATER AND PAD DON'T TOUCH EXAMPLE ( LIKE WHEN A CAR TYRE AQUAPLANES ON WATER ) 4.TRUST ME I CAN POLISH ANY STONE ENGINEERED OR NATURAL WITH SAND PAPER AND A FELT BUFF HEAD AND POLISHING POWDER. THIS LITTLE GISMO WOULD BE REALLY HANDY IN TRAINING PEOPLE QUICK
After pushing/polishing/handbombing granite for 15 years...... Developing two spine conditions....... pretty impressive energy saver i might say. I wouldn't listen to the haters stuck in the big granite guy state of mind.. bin there done that NOT cool..you need to rinse more and spend more time with each pad and apply less pressure as you go threw the pads. I bet the edges are straight.
What is the purpose of this some kind of adapter? You have to round off little bit of the actual edge so it is not sharp to the touch, but this thing doesn't do that.
***** I am not sure if anybody needs anything for "flat polishing", unless they have a bad case of hand' shaking. So, pretty much this thing is useless.................no purpose! Failed invention.
This tool definitely has a place in the granite polishing world, but you have to spend a lot more time to make it right. Really though it's completely unnecessary you can do the same thing with better results way faster without it. Cool tool though
I'm not a pro or anything, but I like to take all of my equal height trim and clamp it together, then polish the whole assembly like slab. Not perfect, but stone is still better than wood floor trim...
bunch of haters that contraption saves energy he's polishing downward rocking back and forth dude could polish 2-3 jobs by lunch and still do 50 pushups
lyricist lyricist your an idiot. This is for demonstration only. Youd never have an edge facing up puke that in real life. The thibg is shit. He just needs to learn to polish by hand and then he dont have a fadded polish like he had with the contraption.
Jaime Vargas mejor aprende o enseña a tus trabajadores a hacerlo manual, esa máquina no pule bien la parte de en medio y luego las orillas en la irte de arriba ya es otro trabajo aparte que lo puedes hacer de una sola vez a mano.
I've been hand polishing for two years his work would never leave our shop looking like that. I've never seen this guide before it seems to only get the top and bottom and not the middle of the edge. looks to be too mush work to me.
you are dead right.....he doesnt know to clean previous grit away.....or to check work each change over as with sandpaper.. a total time waster......still if it was just a demo....it was a beginner only.
If you can't polish a piece of flat splash without that contraption then you should be hit with a hammer. Its probably best at getting little granite chunks caught in it and leaving beautiful scratches running the length of the splash. Watch next video on repairs.
Disculpen la rudeza, pero ese pulidor con esa guía no sirve para ni mierda, a los lados te lo pule bien y al centro te lo dejó opaco , y mucha pérdida de tiempo estar quitando la guía Y poniendo la lija para pulir, puedes echarle cera para Que brille pero si el cliente te la limpia con acetona, la cera se va a la mierda y se ve tu mal trabajo... hay herramientas que no sirven para ni mierda
aapke machine bahut jor se kam Karti hai per mere ko awaz sunai Nahin de rahi aapki chimki aur jaldi se mobile number bhej dijiye aur Maharashtra mein kahan milati hai main jalgaon district to jalgaon district se baat kar raha hun aapka company ka Chahta hero shatrughan gaikwad
well my friend i have worked with stone my whole life if you need that thing you have there to polish stright then i am not too sure about your quality and when i watch this video i notice on the ends your slipping off but good luck with that
You waist more time flipping the piece and the pads doing it like that and also if you pass the first 3 pads longer u would have a perfect polish the last 3 u can just pass them by like your doing.
bunch of haters that contraption saves energy he's polishing downward rocking back and forth dude could polish 2-3 jobs by lunch and still do 50 pushups
Great process. Swapping out the pads is not all that time consuming. It provides for a great end result.
It shouldn't have a grey strike down the middle when your done polishing that means you missed the middle with some pads
Not sure why this came up in my feed, but either those finishing pads are worn out or the machine is not horizontal. That haze is unacceptable unless there is a further finishing stage not presented here. Either way, we never saw the "before" condition either. It needed further development.
I have 30yrs on the tools polishing granite from memorial work to counter tops and more...
Any one that tries to improve his or her lot shouldn`t have such hatefull coments made but instead have at least some advise that will hopefully improve their efforts....shame on the lot of you........The the real reason for the cloudy/missed polish to the middle of the surface is because the pad material is soft. I am not talking about the backing pad. As preasure is applied the outer edge of the pad slightly rolls over the sides of the edge being polished and thus lifts the cunter of the pad,the flat pad adopts a dome shape. the more pressure applied the worse the problem. for this specific reason edge poliishing machines use hard blocks..I respectfully suggest to Air Tools Gison that he uses hard blocks,slow the rpm by half and slow the feed by half and he will aheive what may well be a perfect edge polish. Futher..I would never say things that my fists couldn`t cash. Keep up your good works Gison
Your wrong mate I've also got years of experience here's what's wrong people
1.PRESSURE FROM POLISHING PAD TO STONE NEEDS TO BE MINIMUM 1 BAR PRESSURE OR VERY CLOSE TO IT.
2. IT HAS NOTHING TO DO WITH THE CENTRE OF THE POLISHING PAD ITS PROBABLY BETTER SET UP LIKE THAT.
3.LESS WATER FOR CORSE GRIT POLISHING PADS AS YOU SHOULD ADD MORE PRESSURE YOU SHOULD NOT NEED MUCH WATER UNTIL FINAL TWO POLISHING PADS THEN TURN WATER UP A BIT MORE WHY BECAUSE THE WATER TURNED UP TO MUCH CAUSES THE POLISHING PADS TO NOT POLISH PROPERLY HIGH PRESSURE PLUS MOVEMENT AND A PAD THAT'S REALLY FINE CREATES A THIN SURFACE AREA WHERE THE WATER AND PAD DON'T TOUCH EXAMPLE ( LIKE WHEN A CAR TYRE AQUAPLANES ON WATER )
4.TRUST ME I CAN POLISH ANY STONE ENGINEERED OR NATURAL WITH SAND PAPER AND A FELT BUFF HEAD AND POLISHING POWDER. THIS LITTLE GISMO WOULD BE REALLY HANDY IN TRAINING PEOPLE QUICK
what about the haze in the middle and the edge profile and raidiuses
Qual nome de suporte para eu achar para comprar muito interessante
After pushing/polishing/handbombing granite for 15 years...... Developing two spine conditions....... pretty impressive energy saver i might say. I wouldn't listen to the haters stuck in the big granite guy state of mind.. bin there done that NOT cool..you need to rinse more and spend more time with each pad and apply less pressure as you go threw the pads. I bet the edges are straight.
can you please share more details about this product like price features...
شكر وتقدير لك هاذا من اخلاقك ماكنه جيده جدا كم سعرها❤
What is the purpose of this some kind of adapter? You have to round off little bit of the actual edge so it is not sharp to the touch, but this thing doesn't do that.
***** I am not sure if anybody needs anything for "flat polishing", unless they have a bad case of hand' shaking.
So, pretty much this thing is useless.................no purpose!
Failed invention.
Where we can get this equipment here in India
mmm dry lines....why would you put this up if it didnt work
Is these available in India..?
This tool definitely has a place in the granite polishing world, but you have to spend a lot more time to make it right. Really though it's completely unnecessary you can do the same thing with better results way faster without it. Cool tool though
Tube kaun se company ki machine hai
Sar ji main aapke Hona per cash payment dalne ko taiyar hun machine kahan milegi boliye
Good work
I'm not a pro or anything, but I like to take all of my equal height trim and clamp it together, then polish the whole assembly like slab.
Not perfect, but stone is still better than wood floor trim...
bunch of haters that contraption saves energy he's polishing downward rocking back and forth dude could polish 2-3 jobs by lunch and still do 50 pushups
lyricist lyricist your an idiot. This is for demonstration only. Youd never have an edge facing up puke that in real life. The thibg is shit. He just needs to learn to polish by hand and then he dont have a fadded polish like he had with the contraption.
молодец, не потратил время зря
Yeah take it apart ecstatic time to change the pad would take too long
Right just stone it property and use 123 pads and even the radius would already be done...
Sir je machine ka se mile gi
High Price is a deterrent & be made cost effective with ease in availability. Has tremendous scope
Buen dia en que empresa puedo comprar esta herramienta
Jaime Vargas mejor aprende o enseña a tus trabajadores a hacerlo manual, esa máquina no pule bien la parte de en medio y luego las orillas en la irte de arriba ya es otro trabajo aparte que lo puedes hacer de una sola vez a mano.
सरजी इसकी कीमत क्या है ओर कहां मिलेगी यह मशीन
Dear How much this machine please advice
I want to buy equipment. Please Price????
I also want this machine how much this
I've been hand polishing for two years his work would never leave our shop looking like that. I've never seen this guide before it seems to only get the top and bottom and not the middle of the edge. looks to be too mush work to me.
نريد معرفة سعر الالة
How much price
WOW! I have been crafting granite for over 15 yrs. I have never seen such a poorly polished edge. The haze down the middle is disgusting. Epic Fail.
you are dead right.....he doesnt know to clean previous grit away.....or to check work each change over as with sandpaper..
a total time waster......still if it was just a demo....it was a beginner only.
Sar ji yah machine Maharashtra mein kahan mil sakti hai aur uska mobile number dijiye
Price please
What price
हमको भी लेना है भैया कितना में मिलता है
Sar mein ek mistri ho to mujhe machine chahie tour machine kahan per milega
gpw-m1 machine price in India ?
I want machine
कार्य मशीन म्युझिक कॅलेंडर चाहिये
You forgot to polish the middle. Welcome to the world off lego. The mashine is too small to handel.
Online price
If you can't polish a piece of flat splash without that contraption then you should be hit with a hammer. Its probably best at getting little granite chunks caught in it and leaving beautiful scratches running the length of the splash. Watch next video on repairs.
Whats is price?
Disculpen la rudeza, pero ese pulidor con esa guía no sirve para ni mierda, a los lados te lo pule bien y al centro te lo dejó opaco , y mucha pérdida de tiempo estar quitando la guía Y poniendo la lija para pulir,
puedes echarle cera para Que brille pero si el cliente te la limpia con acetona, la cera se va a la mierda y se ve tu mal trabajo...
hay herramientas que no sirven para ni mierda
ı
У нас на кладбище это делают с помощью бутылки с водой и без всяких лишних приспособлений, руками
so fast. good work!
And I bet those wheels have to catch grit and drag it around sooner or later.
Sir mujhe yeh machine shaye
Um....I believe you missed the middle!!!
Woat price
aapke machine bahut jor se kam Karti hai per mere ko awaz sunai Nahin de rahi aapki chimki aur jaldi se mobile number bhej dijiye aur Maharashtra mein kahan milati hai main jalgaon district to jalgaon district se baat kar raha hun aapka company ka Chahta hero shatrughan gaikwad
Ai mesini kahase milegaa
Masin Mila kay .call 7353033822
well my friend i have worked with stone my whole life if you need that thing you have there to polish stright then i am not too sure about your quality and when i watch this video i notice on the ends your slipping off but good luck with that
You waist more time flipping the piece and the pads doing it like that and also if you pass the first 3 pads longer u would have a perfect polish the last 3 u can just pass them by like your doing.
Machine chahie
Wow look at all that work for all that haze. Got some waxing to do bud. Any finisher with 2 weeks training could out shine that by hand and be faster
Hme b chayiye yh msin
Kha milte ye machen
इटली में
That lil attachment for the polisher is a waste of time..
Ye machine kha milegi
desnecessário o uso da base !
missed ur middle. Looks to be to time consuming.
what a waste of time and who would be dumb enough to buy one or I need one.
It dident get the middle of the edeg that's no good.
Odar karnahi
Só atrapalha isso
Só quem não sabe msm
Đánh thế này thì cháy hết đá
Mobaile nombar
Please
Pensa numa invenção inútil, demorada, etc, etc... Invista numa polibordas e pronto!!!
sar aap ki machine yah si machine hai ya nahin tum log kha li public ko chutiya banane ke liye video dikha rahe hain aisi tumhari fek company hai
Ramnivesprajapat1234
Lol
inutile
lazzy
Waste time
Hahaha totally garbage
Looks like garbage a 2 year old could polish better
sir aapka mo no chahiye
Spend more time on the lower grits 💁♂️
bunch of haters that contraption saves energy he's polishing downward rocking back and forth dude could polish 2-3 jobs by lunch and still do 50 pushups